Seadog Nylon Step Handle

Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just...

Seadog Oblong Eye Plate

Investment cast 316 Stainless

Seadog Plastic Oarlock Bushings, pair

These bushings provide low friction rowing when used with our Zinc plated steel oarlocks. They are replacements for boats having 5/8" holes for bushings. They can also be set into holes drilled...

Seadog Polypropylene Screw-out Deck Plates

Our most economical deckplate This is a new product from Sea-Dog. Of course, deck plates are not new, but ones made of Polypropylene are. I think these may be better than the ABS ones as...

Seadog Pop-Out Deck Plates - Black, White & Clear

Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit...

Seadog Premium Brass Angle Mount Oarlock Sockets

These are very elegant brass angle mount oarlock sockets. They would be right at home on a John Welsford Joansa, or any rowboat, for that matter. Not only are these premium sockets...

Seadog Premium Brass Ribbed Horn Oarlocks

These are very elegant ribbed horn oarlocks. They would be right at home on a John Welsford Joansa, or any rowboat, for that matter. The alloy is an engineered high class brass for increased...

Seadog Premium Brass Round Oarlocks

Sold as pairs. Sand cast brass These are very elegant round oarlocks. They would be right at home on a John Welsford Joansa, or any rowboat, for that matter. The alloy is an engineered high...

Seadog Premium Brass Side Mount Oarlock Sockets

These are very elegant brass side mount oarlock sockets. They would be right at home on a John Welsford Joansa, or any rowboat, for that matter. Not only are these premium sockets...

Seadog Premium Brass Top Mount Oarlock Sockets

These are very elegant brass oarlock sockets. They would be right at home on a John Welsford Joansa, or any rowboat, for that matter. Not only are these premium sockets nicely finished...

Seadog Quarter Turn Deck Plates - Black & White

A quick opening deckplate These Quarter-Turn Deck Plates feature a new locking system that prevents over tightening, jamming, or cross threading. Easy to open and close. A specially engineered...

Seadog Removable LED All Around Light

Injection Molded Nylon/Chrome Plated Zinc. LED Removable All Around Lights are approved for USCG 2NM (Colreg 2 mile). 12 Volt DC. Note: drawing is not proportional   Part...

Seadog Replacement Drain Plug

Replacement plug for SD-520010, SD-520020, and SD-520030

Seadog Retro Side Lights

Plastic/Stamped 304 Stainless Steel - 12 Volt DC. We picked these out for a Rifleman that we were building. We love the retro look One pair includes one starboard (Green) and one port (Red). NOTE:...

Seadog Rubber Pole Storage Clips

Santoprene Rubber We really like these rubber Pole storage clips. We got a new catalog from Sea-Dog and upon seeing these things, we immediately ordered some of each size. Use them to secure paddles,...

Seadog Sailmaker's D-Shackles

Stamped 304 Stainless - Made in Denmark These shackles have many potential uses but their primary function is for use attaching sail slugs and slides to grommets. Part No...

Seadog Screw-out Deck Plates

Injection Molded ABS Part No...

Seadog Scupper Valve

Injection molded nylon, these scuppers function as one-way valves to let water out of your boat but not back in. Feedback: Hi Sandra, Attached is the photo I promised of you of the scuppers...

Seadog Short LED All Around Light

Injection molded polycarbonate - 12 Volt DC. LED All Around Lights are approved for USCG 2 NM (Colreg 2 mile). Part# A B C Fastener SD-400042 4-5/16" 1-1/8" 2-1/4" #12 RH  

Seadog Shroud Adjuster

Stainless Steel, 4-1/2 inches long, made in Denmark. This is a special purchase available only in limited numbers.

Seadog Stainless Bow Chocks, pair

Keep anchor or dock lines from chafing gunwale or other parts of your boat. Investment Cast 316 Stainless - these are hefty, high quality parts. They will look good on any boat...

Seadog Stainless D-Shackles

Note: size = pin diameter Above SD-147110 - SD-147108 - SD-147106 - SD-147104 - SD-147103 Forged 316 Stainless Part No...

Seadog Stainless Eye & Jaw Swivels

Note: size = diameter of pin Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of corrosion resistant investment...

Seadog Stainless Eyebolts

Machined 304 Stainless Used for bow eyes or anywhere a secure attachment point is needed. Metric threads. Part No...

Seadog Stainless Fixed Eye Snap Shackle

Investment Cast Stainless Steel. This is also the factory West Wight Potter halyard shackle. Part Number A B C D SD-143520 2-1/4" 3/8" 9/19" 3/8"

Seadog Stainless Folding Pad Eyes

304 stainless folding pad eyes. Each includes a rubber friction pad which enables the eye to remain upright or down when desired. Part A B C D Fastener Sd-090125 1-1/8" 1/2" 1/8" 7/16" #8...

Seadog Stainless Hatch Spring

This clever device is used for holding hatches open. You simply lift the hatch cover and let go. The spring snaps straight and holds the lid up without any effort on your part. To close the hatch,...

Seadog Stainless Jaw & Jaw Swivels

Note: size = diameter of pin Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of corrosion resistant investment...

Seadog Stainless Long D-Shackles

Note: size = pin diameter Forged 316 Stainless Part No. A B C BreakingStrength SD-147173 5/32" 5/16" 1-5/16" 1,540 lb. SD-147174 3/16" 7/16" 1-9/16" 2,200 lb...

Seadog Stainless Pad Eyes

Stamped pad eyes - strong and economical. Made from 304 stainless steel. Part # A B C D E SD-081101 7/16" 7/16" 1-1/8" ...

Seadog Stainless Snap Handle Drain Plug

These commonly seen snap handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any reasonably smooth 1" hole in a...

Seadog Stainless Snap Hooks

Note: size = diameter of stock I always called these "caribiners" but "Snap Hook" works too. Don't confuse these with the cheap, aluminum ones you see at discount and big box stores for 99¢,...

Seadog Stainless Steel Rings

Various sizes, Formed 304 Stainless Steel Part...

Seadog Stainless Straight Chock

Keep anchor or dock lines from chafing gunwale or other parts of your boat. Investment Cast 316 Stainless - these are hefty, high quality parts. They will look good on any boat...

Seadog Stainless Swivel Eye Boat Snap

Investment Cast 316 Stainless Steel. Part Number A B C SD-146131 3-5/16" 7/16" 3/4"

Seadog Stainless T-Handle Drain Plug

These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other...

Seadog Stainless Tie Down Eye Strap

Forged 304 Stainless - great for anchoring webbing for various uses onboard, such as securing water bottles or any other gear that you might not want crashing around the boat when it moves.Note:...

Seadog Stainless Trigger Snap

Investment Cast 316 Stainless Steel.

Seadog Stainless Twisted Shackles

Note: size = pin diameter Forged 316 Stainless Part No. A B C Breaking Strength SD-147403 5/32" 5/16" 1-1/4" 1540 lbs SD-147404 3/16" 3/8" 1" 2,200...

Seadog Stainless U-Bolts

Machined 304 Stainless Used for bow eyes or anywhere a secure attachment point is needed. Metric threads. The outer mounting plate is held held in place by crimped ears forged into the U-Bolt...

Seadog Stainless, Davis Style, Fold-Down Oarlocks/one oarlock, one socket

We used to carry the bronze Davis fold-down oarlock/sockets but those became unavailable. Finally after about a year, we are now able to offer this stainless steel version. Just lift the oarlock and...

Seadog Standard Clear Deck Plates

Injection Molded ABS The Sea-Dog Screw Out Deck Plate with clear polycarbonate lid allows visual inspection of watertight compartments, storage lockers and fuel fittings without removing the lid. Use...

Seadog Stern Eyes

Sea-Dog® Stern Eyes come with adjustable finish nuts as compared to the crimped ring used on most other Stern Eyes. All parts are 304 stainless steel. Plate sizes: 2-1/4" x 3/4" (plate 1)...

SeaDog Telescoping Boat Hook

Sea-Dog® boat hooks are constructed of marine grade aluminum tubing with a threaded end attachment and comfort grip handle. Add in a four-point hook attachment from a over-molded soft...

Seadog Terminal Post

Nylon/Stainless Includes cover to meet ABYC/USCG Requirements. Maximum Amps: 150. Maximum Volts: 48 DC. A B C D E F Fastener 3-3/4" 1-11/16" 1-5/8" 1-5/16" 2-3/16" 5/16-18 #8 RH

Seadog Universal Kill Switch

Stamped Brass/Injection Molded Nylon & Delrin Replace lanyard if worn, cut or frayed. Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill depending on the...

Seadog Zig Zag Cleat

Simply weave rope around cleat arms, no knots needed. Great for fender lines, trailer covers and utility lines. Fits line up to 3/8".Part#ABCDFastenerSD-0435403-1/2"15/16"1-15/16"1-3/4"1/4FH

Seadog Zinc Plated Steel Oarlocks

These utility oarlocks are good for beginners as they hold the blade in position. They will clamp onto a shaft from 1-1/4 to 1-3/4 inches in diameter without modification. Mild steel construction...