Drain Plugs, Scuppers, Bailers

Seadog Stainless T-Handle Drain Plug

These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or...

Potter 19 Bilge Drain

This Garboard Drain & Plug provides drainage for bilge during haul-out. Design includes integral 1-1/8" acetyl drain tube. Pipe plug ensures a watertight seal. Constructed of sturdy UV stabilized injection molded nylon. Installs with three #8 FH...

Andersen Mini Bailer

The ANDERSEN automatic bailers are available World Wide and recogized by dinghy sailors as the most effective and reliable means of automatic bailing. ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service...

Seadog Nylon Flange Type Screw-in Drain Plug

These Drain Plugs are designed with a molded-in recess in the base, thus trapping the sealant in place and providing a more water-tight seal. They also have a captive mechanism that keeps the plug in the body but still allows easy removal of the plug...

Seadog Scupper Valve

Injection molded nylon, these scuppers function as one-way valves to let water out of your boat but not back in. Feedback: Hi Sandra, Attached is the photo I promised of you of the scuppers installed on the Escargot canal boat I am building. They appear...

Seadog Stainless Snap Handle Drain Plug

These commonly seen snap handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any reasonably smooth 1" hole in a transom or other location will work. You can install a...

Seadog Replacement Drain Plug

Replacement plug for SD-520010, SD-520020, and SD-520030

Bronze Garboard Drain & Plug

This is the best plug we've found for water ballast tanks like those found on SCAMP, as it is relatively low profile and has an easily turned T-handle. Sea-Dog says:The Garboard Drain & Plug provides drainage for bilge during haul-out. 1/2" NPT...

Seadog Nylon Flange Type Screw-in Drain Plug 1

These Drain Plugs are designed with a molded-in recess in the base, thus trapping the sealant in place and providing a more water-tight seal. They also have a captive mechanism that keeps the plug in the body but still allows easy removal of the plug...

Seadog Brass Drain Tube

When you use either our T-handle or Snap Handle plugs you will get better results if you glue one of these brass drain tubes in first. Order plugs separately. Cat No. A B SD-520210 1" 1-7/8"

Andersen Bailer Service Kit

This is the rebuild kit for the Andersen Mini Bailer sold HEREClick to view Bailer Service Kit Installation Instructions- Outside Mounted

SeaLect HDPE Drain Tube

This drain tube consists of two pieces, a tube with a flange on one end and another end piece with a flange. The end piece fits over the tube with a friction fit. The tube can be cut off to accommodate any thicknesss from 3/4 to 2-1/2 inches.Designed to...

SeaLect Tapered Scupper Plug

This stopper is designed for use with the SeaLect HDPE drain tube. Cat No. A B C D K520113 15/16" 3/4" 1" 2-1/2"

Seadog Nylon Press Fit Screw-in Drain Plug

These Nylon drain plugs are designed to fit securely in a 1" hole without the use of fasteners. The ridges on the body of the Drain Plug are designed to keep the plug in place. Sealant should be applied prior to installation to make a watertight seal...