MSRP:
Now:
$4.46
Was:
— You save
Description
These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or simply line the hole with epoxy. Plug tightens by screwing the T-handle tight.
See our Brass drain tubes
Cat No.
|
A
|
SD-520075
|
1"
|
Related Products

Seadog Nylon Press Fit Screw-in Drain Plug
MSRP:
Now:
$2.95
Was:
These Nylon drain plugs are designed to fit securely in a 1" hole without the use of fasteners. The ridges on the body of the Drain Plug are designed to keep the plug in place. Sealant should be...

Seadog Brass Drain Tube
MSRP:
Now:
$3.38
Was:
When you use either our T-handle or Snap Handle plugs you will get better results if you glue one of these brass drain tubes in first. Order plugs separately.

Seadog Stainless Snap Handle Drain Plug
MSRP:
Now:
$5.04
Was:
These commonly seen snap handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any reasonably smooth 1" hole in a...

Seadog Nylon Flange Type Screw-in Drain Plug
MSRP:
Now:
$3.99
Was:
These Drain Plugs are designed with a molded-in recess in the base, thus trapping the sealant in place and providing a more water-tight seal. They also have a captive mechanism that keeps the plug in...
Customers Also Viewed

Seadog Stainless Snap Handle Drain Plug
MSRP:
Now:
$5.04
Was:
These commonly seen snap handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any reasonably smooth 1" hole in a...

Seadog Brass Drain Tube
MSRP:
Now:
$3.38
Was:
When you use either our T-handle or Snap Handle plugs you will get better results if you glue one of these brass drain tubes in first. Order plugs separately.
Cat No...

Bronze Garboard Drain & Plug
MSRP:
Now:
$16.00
Was:
This is the best plug we've found for water ballast tanks like those found on SCAMP, as it is relatively low profile and has an easily turned T-handle.
Sea-Dog says:The Garboard Drain & Plug...


Small Boat Head System
MSRP:
Now:
$9.00 - $79.00
Was:
Perfect for any small boat without a built-in head
Over the years we've tried a variety of different "heads" on small boats from fold-down seats with waste bags to chemical porta-potties and each has...

Seadog Nylon Flange Type Screw-in Drain Plug 1
MSRP:
Now:
$7.53
Was:
These Drain Plugs are designed with a molded-in recess in the base, thus trapping the sealant in place and providing a more water-tight seal. They also have a captive mechanism that keeps the plug in...

SeaLect HDPE Drain Tube
MSRP:
Now:
$2.01
Was:
This drain tube consists of two pieces, a tube with a flange on one end and another end piece with a flange. The end piece fits over the tube with a friction fit. The tube can be cut off to...

SeaLect Tapered Scupper Plug
MSRP:
Now:
$2.48
Was:
This stopper is designed for use with the SeaLect HDPE drain tube.
Cat No.
A
B
C
D
K520113
15/16"
3/4"
1"
2-1/2"

Stainless Quick-Release Pins
MSRP:
Now:
$2.99 - $4.99
Was:
AISI 304 Stainless
Note: Nominal size is overall length of pin - see sketch below for other dimensions...

Forestay Tensioning Lever
MSRP:
Now:
$75.00
Was:
Mast-raising and rigging goes much easier if you can attach the forestay quickly and easily. These quick-release, adjustable forestay levers from C.Sherman Johnson are the perfect solution for many...

Clevis Pins
MSRP:
Now:
$0.00 - $3.93
Was:
Stainless Steel Clevis pins and rings.Pins: Example - "3/16 x 1/2" means the pin is 3/16's of an inch in diameter on the shank of the pin and there is 1/2 inch between the head and the hole. See...