SeaLect Triple Latch Hatch MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar MSRP: Was: Now: $11.41 - $14.25 Choose Options Seadog Pop-Out Deck Plates - Black, White & Clear MSRP: Was: Now: $12.74 - $14.45 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Bags for Sea-Lect Deck Plates with Internal Collars MSRP: Was: Now: $14.99 - $18.99 Choose Options Sealect Recreational Kayak Hatches MSRP: Was: Now: $19.98 - $41.80 Choose Options Seadog Quarter Turn Deck Plates - Black & White MSRP: Was: Now: $9.99 - $15.99 Choose Options Sealect Recreational 4 & 6 inch Hatch Covers w/Internal Collar MSRP: Was: Now: $28.50 - $29.98 Choose Options DPI Pry-Out Cover Plates - Polar White MSRP: $10.90 Was: Now: $10.79 - $13.43 Choose Options Armstrong Hatches MSRP: Was: Now: $45.00 - $109.00 Choose Options DPI Pull-up Deckplates MSRP: Was: Now: $17.99 - $22.99 Choose Options DPI Screw-Down Deckplates - Polar White MSRP: Was: Now: $9.99 - $15.99 Choose Options Sea-Lect Screw Out Deck Plates with Internal Collar MSRP: Was: Now: $11.75 - $15.07 Choose Options Sealect Performance Kayak Hatches MSRP: Was: Now: $11.00 - $95.98 Choose Options DPI Latch Replacement Kit MSRP: Now: $14.00 Add to Cart DPI Hidden Fastener Series Access Doors - Polar White MSRP: Was: Now: $48.79 - $85.52 Choose Options Low Profile Cowl Vent/Snap-On Deck Plate MSRP: Now: $29.95 Add to Cart Seadog Standard Clear Deck Plates MSRP: Was: Now: $12.99 - $16.99 Choose Options Seadog Screw-out Deck Plates MSRP: Was: Now: $12.99 - $15.99 Choose Options Seaflo Access Hatches MSRP: Was: Now: $47.00 - $69.95 Choose Options DPI Cover Plates - Polar White MSRP: Was: Now: $6.90 - $8.55 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options DPI Flush Series Access Doors - Polar White These access doors from DPI Marine are made from hi impact, UV stabilized, polypropylene. They have a thick rubber gasket for a good seal and all the metal parts are stainless steel. The standard doors have holes around the flange. All doors come with... MSRP: Was: Now: $39.70 - $104.63 Choose Options Bags for Sea-Lect Deck Plates with Internal Collars These nylon bags feature a rigid ring which fits neatly into the corresponsing SEA-LECT Designs Quarter Turn Deck Plates, Screw Out Deck Plates and Recreactional kayak hatches - w/ Internal Collar. The Red bag has a drawstring closure... MSRP: Was: Now: $14.99 - $18.99 Choose Options Sealect Recreational Kayak Hatches A lower cost alternative kayak hatch cover RECREATIONAL HATCH LINE: These are an economical alternative to the Performance covers. They fit the same rings but are molded from a single type of flexible, rubbery plastic. They seem to be a bit easier to... MSRP: Was: Now: $19.98 - $41.80 Choose Options Seadog Quarter Turn Deck Plates - Black & White A quick opening deckplate These Quarter-Turn Deck Plates feature a new locking system that prevents over tightening, jamming, or cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge... MSRP: Was: Now: $9.99 - $15.99 Choose Options Sealect Recreational 4 & 6 inch Hatch Covers w/Internal Collar Has internal collar to accept SeaLect bags These rings have an internal collar to accept SeaLect Bags. Below is a picture of the hatch with the red drawstring bag (bags sold separately):Covers can be bought HERE MSRP: Was: Now: $28.50 - $29.98 Choose Options DPI Pry-Out Cover Plates - Polar White 2 sizes - white onlyPart No.ABCDDPAC43-7/4"6-1/16"4-1/8"5-3/16"DPAC65-5/8"8-1/16"6"7-1/4" MSRP: $10.90 Was: Now: $10.79 - $13.43 Choose Options Armstrong Hatches Watertight compression deck plates. Over the years of selling and using various deck plates and hatches we've discovered that very few are really watertight. Fortunately most of them are watertight enough—meaning they don't leak much, and not... MSRP: Was: Now: $45.00 - $109.00 Choose Options DPI Pull-up Deckplates Easy-open round deck plates If you are tired of fighting screw out or pry out deckplates, you may want to switch to these. Not only do these not stick, they have a handy locking handle built in to remove them with. These deckplates from DPI Marine are... MSRP: Was: Now: $17.99 - $22.99 Choose Options DPI Screw-Down Deckplates - Polar White Made from highly durable, UV-stabilized Polypropylene These deckplates open easily with a 90° turn. The top covers the entire flange including fasteners for a clean look. Note: cover (not shown in diagram) is larger than the flange (B) Part No... MSRP: Was: Now: $9.99 - $15.99 Choose Options Sea-Lect Screw Out Deck Plates with Internal Collar These SEA-LECT Designs Deck Plates are molded with a collar on the bottom to hold deck plate bags or other round containers. Use silicone sealant on hull or deck surface when installing the deck plate. Lubricate with Teflon grease or Vaseline... MSRP: Was: Now: $11.75 - $15.07 Choose Options Sealect Performance Kayak Hatches For replacements or new boat constructionNot sure which hatch fits your production boat? Click here for a partial list of manufacturers and hatch part numbers. Part# Outside edge of raised mounting ring Max Size * Minimum... MSRP: Was: Now: $11.00 - $95.98 Choose Options DPI Latch Replacement Kit These replacement latch kits for access doors from DPI Marine are for the DPF and DPH Series hatches only - they do not work for the round Pull Up DPI deck plates. Kit Includes: 1 x Pull Handle 1 x Cam Shaft 1 x O ring 1 x... MSRP: Now: $14.00 Add to Cart DPI Hidden Fastener Series Access Doors - Polar White These access doors from DPI Marine are made from hi impact, UV stabilized, polypropylene. They have a thick rubber gasket for a good seal and all the metal parts are stainless steel. The hidden fastener doors have predrilled mounting holes that are... MSRP: Was: Now: $48.79 - $85.52 Choose Options Low Profile Cowl Vent/Snap-On Deck Plate These vents bring fresh air into a stuffy cabin. Can be used with a dorade box for an all-weather installation. Made from Dip Molded PVC Dia. Height Mtg. Hole Int. Color 3" 5" 3-3/4" Red MSRP: Now: $29.95 Add to Cart Seadog Standard Clear Deck Plates Injection Molded ABS The Sea-Dog Screw Out Deck Plate with clear polycarbonate lid allows visual inspection of watertight compartments, storage lockers and fuel fittings without removing the lid. Use silicone sealant on hull or deck surface when... MSRP: Was: Now: $12.99 - $16.99 Choose Options Seadog Screw-out Deck Plates Injection Molded ABS Part No. A B C D SD-337140SD-337145 4" 5-3/4" 4-1/2" 5-1/8" SD-337150SD-337155 5" 6-3/4" 5-1/2" 6-1/8" SD-337160SD-337165 6" 8-1/8" 6-1/2" 7-3/8" MSRP: Was: Now: $12.99 - $15.99 Choose Options Seaflo Access Hatches ABS Hatches are durable and economical ABS Anti-aging, Anti-ultraviolet Easy “click-in”construction Corrosion free synthetic fittings and durable rubber seals 180° opening hatches Low Profile: 1/2″ Inch Closed Height Hidden... MSRP: Was: Now: $47.00 - $69.95 Choose Options DPI Cover Plates - Polar White Made from highly durable, UV-stabilized Polypropylene These covers are designed to cover places that only need to be exposed once in a blue moon. You have to remove the 6 screws to open them. They could be used to inspect hard to reach areas for rot or... MSRP: Was: Now: $6.90 - $8.55 Choose Options Compare Selected × OK
Sealect Recreational 4 & 6 inch Hatch Covers w/Internal Collar MSRP: Was: Now: $28.50 - $29.98 Choose Options
DPI Latch Replacement Kit MSRP: Now: $14.00 Add to Cart DPI Hidden Fastener Series Access Doors - Polar White MSRP: Was: Now: $48.79 - $85.52 Choose Options Low Profile Cowl Vent/Snap-On Deck Plate MSRP: Now: $29.95 Add to Cart Seadog Standard Clear Deck Plates MSRP: Was: Now: $12.99 - $16.99 Choose Options Seadog Screw-out Deck Plates MSRP: Was: Now: $12.99 - $15.99 Choose Options Seaflo Access Hatches MSRP: Was: Now: $47.00 - $69.95 Choose Options DPI Cover Plates - Polar White MSRP: Was: Now: $6.90 - $8.55 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options DPI Flush Series Access Doors - Polar White These access doors from DPI Marine are made from hi impact, UV stabilized, polypropylene. They have a thick rubber gasket for a good seal and all the metal parts are stainless steel. The standard doors have holes around the flange. All doors come with... MSRP: Was: Now: $39.70 - $104.63 Choose Options Bags for Sea-Lect Deck Plates with Internal Collars These nylon bags feature a rigid ring which fits neatly into the corresponsing SEA-LECT Designs Quarter Turn Deck Plates, Screw Out Deck Plates and Recreactional kayak hatches - w/ Internal Collar. The Red bag has a drawstring closure... MSRP: Was: Now: $14.99 - $18.99 Choose Options Sealect Recreational Kayak Hatches A lower cost alternative kayak hatch cover RECREATIONAL HATCH LINE: These are an economical alternative to the Performance covers. They fit the same rings but are molded from a single type of flexible, rubbery plastic. They seem to be a bit easier to... MSRP: Was: Now: $19.98 - $41.80 Choose Options Seadog Quarter Turn Deck Plates - Black & White A quick opening deckplate These Quarter-Turn Deck Plates feature a new locking system that prevents over tightening, jamming, or cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge... MSRP: Was: Now: $9.99 - $15.99 Choose Options Sealect Recreational 4 & 6 inch Hatch Covers w/Internal Collar Has internal collar to accept SeaLect bags These rings have an internal collar to accept SeaLect Bags. Below is a picture of the hatch with the red drawstring bag (bags sold separately):Covers can be bought HERE MSRP: Was: Now: $28.50 - $29.98 Choose Options DPI Pry-Out Cover Plates - Polar White 2 sizes - white onlyPart No.ABCDDPAC43-7/4"6-1/16"4-1/8"5-3/16"DPAC65-5/8"8-1/16"6"7-1/4" MSRP: $10.90 Was: Now: $10.79 - $13.43 Choose Options Armstrong Hatches Watertight compression deck plates. Over the years of selling and using various deck plates and hatches we've discovered that very few are really watertight. Fortunately most of them are watertight enough—meaning they don't leak much, and not... MSRP: Was: Now: $45.00 - $109.00 Choose Options DPI Pull-up Deckplates Easy-open round deck plates If you are tired of fighting screw out or pry out deckplates, you may want to switch to these. Not only do these not stick, they have a handy locking handle built in to remove them with. These deckplates from DPI Marine are... MSRP: Was: Now: $17.99 - $22.99 Choose Options DPI Screw-Down Deckplates - Polar White Made from highly durable, UV-stabilized Polypropylene These deckplates open easily with a 90° turn. The top covers the entire flange including fasteners for a clean look. Note: cover (not shown in diagram) is larger than the flange (B) Part No... MSRP: Was: Now: $9.99 - $15.99 Choose Options Sea-Lect Screw Out Deck Plates with Internal Collar These SEA-LECT Designs Deck Plates are molded with a collar on the bottom to hold deck plate bags or other round containers. Use silicone sealant on hull or deck surface when installing the deck plate. Lubricate with Teflon grease or Vaseline... MSRP: Was: Now: $11.75 - $15.07 Choose Options Sealect Performance Kayak Hatches For replacements or new boat constructionNot sure which hatch fits your production boat? Click here for a partial list of manufacturers and hatch part numbers. Part# Outside edge of raised mounting ring Max Size * Minimum... MSRP: Was: Now: $11.00 - $95.98 Choose Options DPI Latch Replacement Kit These replacement latch kits for access doors from DPI Marine are for the DPF and DPH Series hatches only - they do not work for the round Pull Up DPI deck plates. Kit Includes: 1 x Pull Handle 1 x Cam Shaft 1 x O ring 1 x... MSRP: Now: $14.00 Add to Cart DPI Hidden Fastener Series Access Doors - Polar White These access doors from DPI Marine are made from hi impact, UV stabilized, polypropylene. They have a thick rubber gasket for a good seal and all the metal parts are stainless steel. The hidden fastener doors have predrilled mounting holes that are... MSRP: Was: Now: $48.79 - $85.52 Choose Options Low Profile Cowl Vent/Snap-On Deck Plate These vents bring fresh air into a stuffy cabin. Can be used with a dorade box for an all-weather installation. Made from Dip Molded PVC Dia. Height Mtg. Hole Int. Color 3" 5" 3-3/4" Red MSRP: Now: $29.95 Add to Cart Seadog Standard Clear Deck Plates Injection Molded ABS The Sea-Dog Screw Out Deck Plate with clear polycarbonate lid allows visual inspection of watertight compartments, storage lockers and fuel fittings without removing the lid. Use silicone sealant on hull or deck surface when... MSRP: Was: Now: $12.99 - $16.99 Choose Options Seadog Screw-out Deck Plates Injection Molded ABS Part No. A B C D SD-337140SD-337145 4" 5-3/4" 4-1/2" 5-1/8" SD-337150SD-337155 5" 6-3/4" 5-1/2" 6-1/8" SD-337160SD-337165 6" 8-1/8" 6-1/2" 7-3/8" MSRP: Was: Now: $12.99 - $15.99 Choose Options Seaflo Access Hatches ABS Hatches are durable and economical ABS Anti-aging, Anti-ultraviolet Easy “click-in”construction Corrosion free synthetic fittings and durable rubber seals 180° opening hatches Low Profile: 1/2″ Inch Closed Height Hidden... MSRP: Was: Now: $47.00 - $69.95 Choose Options DPI Cover Plates - Polar White Made from highly durable, UV-stabilized Polypropylene These covers are designed to cover places that only need to be exposed once in a blue moon. You have to remove the 6 screws to open them. They could be used to inspect hard to reach areas for rot or... MSRP: Was: Now: $6.90 - $8.55 Choose Options Compare Selected × OK
Low Profile Cowl Vent/Snap-On Deck Plate MSRP: Now: $29.95 Add to Cart Seadog Standard Clear Deck Plates MSRP: Was: Now: $12.99 - $16.99 Choose Options Seadog Screw-out Deck Plates MSRP: Was: Now: $12.99 - $15.99 Choose Options Seaflo Access Hatches MSRP: Was: Now: $47.00 - $69.95 Choose Options DPI Cover Plates - Polar White MSRP: Was: Now: $6.90 - $8.55 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options DPI Flush Series Access Doors - Polar White These access doors from DPI Marine are made from hi impact, UV stabilized, polypropylene. They have a thick rubber gasket for a good seal and all the metal parts are stainless steel. The standard doors have holes around the flange. All doors come with... MSRP: Was: Now: $39.70 - $104.63 Choose Options Bags for Sea-Lect Deck Plates with Internal Collars These nylon bags feature a rigid ring which fits neatly into the corresponsing SEA-LECT Designs Quarter Turn Deck Plates, Screw Out Deck Plates and Recreactional kayak hatches - w/ Internal Collar. The Red bag has a drawstring closure... MSRP: Was: Now: $14.99 - $18.99 Choose Options Sealect Recreational Kayak Hatches A lower cost alternative kayak hatch cover RECREATIONAL HATCH LINE: These are an economical alternative to the Performance covers. They fit the same rings but are molded from a single type of flexible, rubbery plastic. They seem to be a bit easier to... MSRP: Was: Now: $19.98 - $41.80 Choose Options Seadog Quarter Turn Deck Plates - Black & White A quick opening deckplate These Quarter-Turn Deck Plates feature a new locking system that prevents over tightening, jamming, or cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge... MSRP: Was: Now: $9.99 - $15.99 Choose Options Sealect Recreational 4 & 6 inch Hatch Covers w/Internal Collar Has internal collar to accept SeaLect bags These rings have an internal collar to accept SeaLect Bags. Below is a picture of the hatch with the red drawstring bag (bags sold separately):Covers can be bought HERE MSRP: Was: Now: $28.50 - $29.98 Choose Options DPI Pry-Out Cover Plates - Polar White 2 sizes - white onlyPart No.ABCDDPAC43-7/4"6-1/16"4-1/8"5-3/16"DPAC65-5/8"8-1/16"6"7-1/4" MSRP: $10.90 Was: Now: $10.79 - $13.43 Choose Options Armstrong Hatches Watertight compression deck plates. Over the years of selling and using various deck plates and hatches we've discovered that very few are really watertight. Fortunately most of them are watertight enough—meaning they don't leak much, and not... MSRP: Was: Now: $45.00 - $109.00 Choose Options DPI Pull-up Deckplates Easy-open round deck plates If you are tired of fighting screw out or pry out deckplates, you may want to switch to these. Not only do these not stick, they have a handy locking handle built in to remove them with. These deckplates from DPI Marine are... MSRP: Was: Now: $17.99 - $22.99 Choose Options DPI Screw-Down Deckplates - Polar White Made from highly durable, UV-stabilized Polypropylene These deckplates open easily with a 90° turn. The top covers the entire flange including fasteners for a clean look. Note: cover (not shown in diagram) is larger than the flange (B) Part No... MSRP: Was: Now: $9.99 - $15.99 Choose Options Sea-Lect Screw Out Deck Plates with Internal Collar These SEA-LECT Designs Deck Plates are molded with a collar on the bottom to hold deck plate bags or other round containers. Use silicone sealant on hull or deck surface when installing the deck plate. Lubricate with Teflon grease or Vaseline... MSRP: Was: Now: $11.75 - $15.07 Choose Options Sealect Performance Kayak Hatches For replacements or new boat constructionNot sure which hatch fits your production boat? Click here for a partial list of manufacturers and hatch part numbers. Part# Outside edge of raised mounting ring Max Size * Minimum... MSRP: Was: Now: $11.00 - $95.98 Choose Options DPI Latch Replacement Kit These replacement latch kits for access doors from DPI Marine are for the DPF and DPH Series hatches only - they do not work for the round Pull Up DPI deck plates. Kit Includes: 1 x Pull Handle 1 x Cam Shaft 1 x O ring 1 x... MSRP: Now: $14.00 Add to Cart DPI Hidden Fastener Series Access Doors - Polar White These access doors from DPI Marine are made from hi impact, UV stabilized, polypropylene. They have a thick rubber gasket for a good seal and all the metal parts are stainless steel. The hidden fastener doors have predrilled mounting holes that are... MSRP: Was: Now: $48.79 - $85.52 Choose Options Low Profile Cowl Vent/Snap-On Deck Plate These vents bring fresh air into a stuffy cabin. Can be used with a dorade box for an all-weather installation. Made from Dip Molded PVC Dia. Height Mtg. Hole Int. Color 3" 5" 3-3/4" Red MSRP: Now: $29.95 Add to Cart Seadog Standard Clear Deck Plates Injection Molded ABS The Sea-Dog Screw Out Deck Plate with clear polycarbonate lid allows visual inspection of watertight compartments, storage lockers and fuel fittings without removing the lid. Use silicone sealant on hull or deck surface when... MSRP: Was: Now: $12.99 - $16.99 Choose Options Seadog Screw-out Deck Plates Injection Molded ABS Part No. A B C D SD-337140SD-337145 4" 5-3/4" 4-1/2" 5-1/8" SD-337150SD-337155 5" 6-3/4" 5-1/2" 6-1/8" SD-337160SD-337165 6" 8-1/8" 6-1/2" 7-3/8" MSRP: Was: Now: $12.99 - $15.99 Choose Options Seaflo Access Hatches ABS Hatches are durable and economical ABS Anti-aging, Anti-ultraviolet Easy “click-in”construction Corrosion free synthetic fittings and durable rubber seals 180° opening hatches Low Profile: 1/2″ Inch Closed Height Hidden... MSRP: Was: Now: $47.00 - $69.95 Choose Options DPI Cover Plates - Polar White Made from highly durable, UV-stabilized Polypropylene These covers are designed to cover places that only need to be exposed once in a blue moon. You have to remove the 6 screws to open them. They could be used to inspect hard to reach areas for rot or... MSRP: Was: Now: $6.90 - $8.55 Choose Options Compare Selected × OK
SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options DPI Flush Series Access Doors - Polar White These access doors from DPI Marine are made from hi impact, UV stabilized, polypropylene. They have a thick rubber gasket for a good seal and all the metal parts are stainless steel. The standard doors have holes around the flange. All doors come with... MSRP: Was: Now: $39.70 - $104.63 Choose Options Bags for Sea-Lect Deck Plates with Internal Collars These nylon bags feature a rigid ring which fits neatly into the corresponsing SEA-LECT Designs Quarter Turn Deck Plates, Screw Out Deck Plates and Recreactional kayak hatches - w/ Internal Collar. The Red bag has a drawstring closure... MSRP: Was: Now: $14.99 - $18.99 Choose Options Sealect Recreational Kayak Hatches A lower cost alternative kayak hatch cover RECREATIONAL HATCH LINE: These are an economical alternative to the Performance covers. They fit the same rings but are molded from a single type of flexible, rubbery plastic. They seem to be a bit easier to... MSRP: Was: Now: $19.98 - $41.80 Choose Options Seadog Quarter Turn Deck Plates - Black & White A quick opening deckplate These Quarter-Turn Deck Plates feature a new locking system that prevents over tightening, jamming, or cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge... MSRP: Was: Now: $9.99 - $15.99 Choose Options Sealect Recreational 4 & 6 inch Hatch Covers w/Internal Collar Has internal collar to accept SeaLect bags These rings have an internal collar to accept SeaLect Bags. Below is a picture of the hatch with the red drawstring bag (bags sold separately):Covers can be bought HERE MSRP: Was: Now: $28.50 - $29.98 Choose Options DPI Pry-Out Cover Plates - Polar White 2 sizes - white onlyPart No.ABCDDPAC43-7/4"6-1/16"4-1/8"5-3/16"DPAC65-5/8"8-1/16"6"7-1/4" MSRP: $10.90 Was: Now: $10.79 - $13.43 Choose Options Armstrong Hatches Watertight compression deck plates. Over the years of selling and using various deck plates and hatches we've discovered that very few are really watertight. Fortunately most of them are watertight enough—meaning they don't leak much, and not... MSRP: Was: Now: $45.00 - $109.00 Choose Options DPI Pull-up Deckplates Easy-open round deck plates If you are tired of fighting screw out or pry out deckplates, you may want to switch to these. Not only do these not stick, they have a handy locking handle built in to remove them with. These deckplates from DPI Marine are... MSRP: Was: Now: $17.99 - $22.99 Choose Options DPI Screw-Down Deckplates - Polar White Made from highly durable, UV-stabilized Polypropylene These deckplates open easily with a 90° turn. The top covers the entire flange including fasteners for a clean look. Note: cover (not shown in diagram) is larger than the flange (B) Part No... MSRP: Was: Now: $9.99 - $15.99 Choose Options Sea-Lect Screw Out Deck Plates with Internal Collar These SEA-LECT Designs Deck Plates are molded with a collar on the bottom to hold deck plate bags or other round containers. Use silicone sealant on hull or deck surface when installing the deck plate. Lubricate with Teflon grease or Vaseline... MSRP: Was: Now: $11.75 - $15.07 Choose Options Sealect Performance Kayak Hatches For replacements or new boat constructionNot sure which hatch fits your production boat? Click here for a partial list of manufacturers and hatch part numbers. Part# Outside edge of raised mounting ring Max Size * Minimum... MSRP: Was: Now: $11.00 - $95.98 Choose Options DPI Latch Replacement Kit These replacement latch kits for access doors from DPI Marine are for the DPF and DPH Series hatches only - they do not work for the round Pull Up DPI deck plates. Kit Includes: 1 x Pull Handle 1 x Cam Shaft 1 x O ring 1 x... MSRP: Now: $14.00 Add to Cart DPI Hidden Fastener Series Access Doors - Polar White These access doors from DPI Marine are made from hi impact, UV stabilized, polypropylene. They have a thick rubber gasket for a good seal and all the metal parts are stainless steel. The hidden fastener doors have predrilled mounting holes that are... MSRP: Was: Now: $48.79 - $85.52 Choose Options Low Profile Cowl Vent/Snap-On Deck Plate These vents bring fresh air into a stuffy cabin. Can be used with a dorade box for an all-weather installation. Made from Dip Molded PVC Dia. Height Mtg. Hole Int. Color 3" 5" 3-3/4" Red MSRP: Now: $29.95 Add to Cart Seadog Standard Clear Deck Plates Injection Molded ABS The Sea-Dog Screw Out Deck Plate with clear polycarbonate lid allows visual inspection of watertight compartments, storage lockers and fuel fittings without removing the lid. Use silicone sealant on hull or deck surface when... MSRP: Was: Now: $12.99 - $16.99 Choose Options Seadog Screw-out Deck Plates Injection Molded ABS Part No. A B C D SD-337140SD-337145 4" 5-3/4" 4-1/2" 5-1/8" SD-337150SD-337155 5" 6-3/4" 5-1/2" 6-1/8" SD-337160SD-337165 6" 8-1/8" 6-1/2" 7-3/8" MSRP: Was: Now: $12.99 - $15.99 Choose Options Seaflo Access Hatches ABS Hatches are durable and economical ABS Anti-aging, Anti-ultraviolet Easy “click-in”construction Corrosion free synthetic fittings and durable rubber seals 180° opening hatches Low Profile: 1/2″ Inch Closed Height Hidden... MSRP: Was: Now: $47.00 - $69.95 Choose Options DPI Cover Plates - Polar White Made from highly durable, UV-stabilized Polypropylene These covers are designed to cover places that only need to be exposed once in a blue moon. You have to remove the 6 screws to open them. They could be used to inspect hard to reach areas for rot or... MSRP: Was: Now: $6.90 - $8.55 Choose Options Compare Selected × OK
Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options
Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options
DPI Flush Series Access Doors - Polar White These access doors from DPI Marine are made from hi impact, UV stabilized, polypropylene. They have a thick rubber gasket for a good seal and all the metal parts are stainless steel. The standard doors have holes around the flange. All doors come with... MSRP: Was: Now: $39.70 - $104.63 Choose Options
Bags for Sea-Lect Deck Plates with Internal Collars These nylon bags feature a rigid ring which fits neatly into the corresponsing SEA-LECT Designs Quarter Turn Deck Plates, Screw Out Deck Plates and Recreactional kayak hatches - w/ Internal Collar. The Red bag has a drawstring closure... MSRP: Was: Now: $14.99 - $18.99 Choose Options
Sealect Recreational Kayak Hatches A lower cost alternative kayak hatch cover RECREATIONAL HATCH LINE: These are an economical alternative to the Performance covers. They fit the same rings but are molded from a single type of flexible, rubbery plastic. They seem to be a bit easier to... MSRP: Was: Now: $19.98 - $41.80 Choose Options
Seadog Quarter Turn Deck Plates - Black & White A quick opening deckplate These Quarter-Turn Deck Plates feature a new locking system that prevents over tightening, jamming, or cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge... MSRP: Was: Now: $9.99 - $15.99 Choose Options
Sealect Recreational 4 & 6 inch Hatch Covers w/Internal Collar Has internal collar to accept SeaLect bags These rings have an internal collar to accept SeaLect Bags. Below is a picture of the hatch with the red drawstring bag (bags sold separately):Covers can be bought HERE MSRP: Was: Now: $28.50 - $29.98 Choose Options
DPI Pry-Out Cover Plates - Polar White 2 sizes - white onlyPart No.ABCDDPAC43-7/4"6-1/16"4-1/8"5-3/16"DPAC65-5/8"8-1/16"6"7-1/4" MSRP: $10.90 Was: Now: $10.79 - $13.43 Choose Options
Armstrong Hatches Watertight compression deck plates. Over the years of selling and using various deck plates and hatches we've discovered that very few are really watertight. Fortunately most of them are watertight enough—meaning they don't leak much, and not... MSRP: Was: Now: $45.00 - $109.00 Choose Options
DPI Pull-up Deckplates Easy-open round deck plates If you are tired of fighting screw out or pry out deckplates, you may want to switch to these. Not only do these not stick, they have a handy locking handle built in to remove them with. These deckplates from DPI Marine are... MSRP: Was: Now: $17.99 - $22.99 Choose Options
DPI Screw-Down Deckplates - Polar White Made from highly durable, UV-stabilized Polypropylene These deckplates open easily with a 90° turn. The top covers the entire flange including fasteners for a clean look. Note: cover (not shown in diagram) is larger than the flange (B) Part No... MSRP: Was: Now: $9.99 - $15.99 Choose Options
Sea-Lect Screw Out Deck Plates with Internal Collar These SEA-LECT Designs Deck Plates are molded with a collar on the bottom to hold deck plate bags or other round containers. Use silicone sealant on hull or deck surface when installing the deck plate. Lubricate with Teflon grease or Vaseline... MSRP: Was: Now: $11.75 - $15.07 Choose Options
Sealect Performance Kayak Hatches For replacements or new boat constructionNot sure which hatch fits your production boat? Click here for a partial list of manufacturers and hatch part numbers. Part# Outside edge of raised mounting ring Max Size * Minimum... MSRP: Was: Now: $11.00 - $95.98 Choose Options
DPI Latch Replacement Kit These replacement latch kits for access doors from DPI Marine are for the DPF and DPH Series hatches only - they do not work for the round Pull Up DPI deck plates. Kit Includes: 1 x Pull Handle 1 x Cam Shaft 1 x O ring 1 x... MSRP: Now: $14.00 Add to Cart DPI Hidden Fastener Series Access Doors - Polar White These access doors from DPI Marine are made from hi impact, UV stabilized, polypropylene. They have a thick rubber gasket for a good seal and all the metal parts are stainless steel. The hidden fastener doors have predrilled mounting holes that are... MSRP: Was: Now: $48.79 - $85.52 Choose Options Low Profile Cowl Vent/Snap-On Deck Plate These vents bring fresh air into a stuffy cabin. Can be used with a dorade box for an all-weather installation. Made from Dip Molded PVC Dia. Height Mtg. Hole Int. Color 3" 5" 3-3/4" Red MSRP: Now: $29.95 Add to Cart Seadog Standard Clear Deck Plates Injection Molded ABS The Sea-Dog Screw Out Deck Plate with clear polycarbonate lid allows visual inspection of watertight compartments, storage lockers and fuel fittings without removing the lid. Use silicone sealant on hull or deck surface when... MSRP: Was: Now: $12.99 - $16.99 Choose Options Seadog Screw-out Deck Plates Injection Molded ABS Part No. A B C D SD-337140SD-337145 4" 5-3/4" 4-1/2" 5-1/8" SD-337150SD-337155 5" 6-3/4" 5-1/2" 6-1/8" SD-337160SD-337165 6" 8-1/8" 6-1/2" 7-3/8" MSRP: Was: Now: $12.99 - $15.99 Choose Options Seaflo Access Hatches ABS Hatches are durable and economical ABS Anti-aging, Anti-ultraviolet Easy “click-in”construction Corrosion free synthetic fittings and durable rubber seals 180° opening hatches Low Profile: 1/2″ Inch Closed Height Hidden... MSRP: Was: Now: $47.00 - $69.95 Choose Options DPI Cover Plates - Polar White Made from highly durable, UV-stabilized Polypropylene These covers are designed to cover places that only need to be exposed once in a blue moon. You have to remove the 6 screws to open them. They could be used to inspect hard to reach areas for rot or... MSRP: Was: Now: $6.90 - $8.55 Choose Options Compare Selected × OK
DPI Hidden Fastener Series Access Doors - Polar White These access doors from DPI Marine are made from hi impact, UV stabilized, polypropylene. They have a thick rubber gasket for a good seal and all the metal parts are stainless steel. The hidden fastener doors have predrilled mounting holes that are... MSRP: Was: Now: $48.79 - $85.52 Choose Options
Low Profile Cowl Vent/Snap-On Deck Plate These vents bring fresh air into a stuffy cabin. Can be used with a dorade box for an all-weather installation. Made from Dip Molded PVC Dia. Height Mtg. Hole Int. Color 3" 5" 3-3/4" Red MSRP: Now: $29.95 Add to Cart Seadog Standard Clear Deck Plates Injection Molded ABS The Sea-Dog Screw Out Deck Plate with clear polycarbonate lid allows visual inspection of watertight compartments, storage lockers and fuel fittings without removing the lid. Use silicone sealant on hull or deck surface when... MSRP: Was: Now: $12.99 - $16.99 Choose Options Seadog Screw-out Deck Plates Injection Molded ABS Part No. A B C D SD-337140SD-337145 4" 5-3/4" 4-1/2" 5-1/8" SD-337150SD-337155 5" 6-3/4" 5-1/2" 6-1/8" SD-337160SD-337165 6" 8-1/8" 6-1/2" 7-3/8" MSRP: Was: Now: $12.99 - $15.99 Choose Options Seaflo Access Hatches ABS Hatches are durable and economical ABS Anti-aging, Anti-ultraviolet Easy “click-in”construction Corrosion free synthetic fittings and durable rubber seals 180° opening hatches Low Profile: 1/2″ Inch Closed Height Hidden... MSRP: Was: Now: $47.00 - $69.95 Choose Options DPI Cover Plates - Polar White Made from highly durable, UV-stabilized Polypropylene These covers are designed to cover places that only need to be exposed once in a blue moon. You have to remove the 6 screws to open them. They could be used to inspect hard to reach areas for rot or... MSRP: Was: Now: $6.90 - $8.55 Choose Options Compare Selected
Seadog Standard Clear Deck Plates Injection Molded ABS The Sea-Dog Screw Out Deck Plate with clear polycarbonate lid allows visual inspection of watertight compartments, storage lockers and fuel fittings without removing the lid. Use silicone sealant on hull or deck surface when... MSRP: Was: Now: $12.99 - $16.99 Choose Options
Seadog Screw-out Deck Plates Injection Molded ABS Part No. A B C D SD-337140SD-337145 4" 5-3/4" 4-1/2" 5-1/8" SD-337150SD-337155 5" 6-3/4" 5-1/2" 6-1/8" SD-337160SD-337165 6" 8-1/8" 6-1/2" 7-3/8" MSRP: Was: Now: $12.99 - $15.99 Choose Options
Seaflo Access Hatches ABS Hatches are durable and economical ABS Anti-aging, Anti-ultraviolet Easy “click-in”construction Corrosion free synthetic fittings and durable rubber seals 180° opening hatches Low Profile: 1/2″ Inch Closed Height Hidden... MSRP: Was: Now: $47.00 - $69.95 Choose Options
DPI Cover Plates - Polar White Made from highly durable, UV-stabilized Polypropylene These covers are designed to cover places that only need to be exposed once in a blue moon. You have to remove the 6 screws to open them. They could be used to inspect hard to reach areas for rot or... MSRP: Was: Now: $6.90 - $8.55 Choose Options