Cabin Sailboats 26' up

Wedge Point 27

LOA - 27' 6"     LWL - 27' 0"   BEAM - 8'     DRAFT - 24" DISPLACEMENT - 4,000 POUNDS POWER - 25hp    SAIL AREA - 113 Sq. Ft. CRUISING SPEED - 10 KNOTS This boat is related to my 15 year old design Yellow...

Fulmar 34'

The Fulmar 34' is a larger sister to the original Fulmar 26'3" heavy displacement centre cockpit cruising yacht. Construction is ply over frame and utilizes ply fore and aft girders and ply bulkheads erected onto a strong-back before chine stringers and...

36' Cruising Ketch Plans

Designed to give as much accommodation as possible on a WL of 28’6’’, this cruiser has both inside and outside steering and up to 7 berths in a comfortable layout. Her ketch rig has all controls led back to the well protected cockpit...

Cormorant Plans PDF

CORMORANT, CABIN SAILBOAT, 32' X 8', 2500 POUNDS EMPTY Cormorant is the largest boat I've ever designed. I always warn folks to think twice and three times before building a big boat because you can buy a good used glass boat for less, maybe a lot less...

Hart 27 Motor Sailer Plans

I was commissioned to design a GRP family motor sailer with the emphasis on getting the most comfortable "package" into 27' LOD. The design has centre raised deckhouse which houses the galley and dinette with interior steering position...

30' Dragonfly Sharpie

For working the East Coast, exploring shallow estuaries and for the occasional hop across to the continent, maybe through the French canals to the Med, this 30' sharpie combines very easy and cheap construction with a simple and efficient rig and room...

26'6" Swallow Tancook Whaler Plans

Ever since I saw the lines of the Tancook Whaler in Chapelle's book Fast American Sailing Craft have been bugged by the wish to design a cruising boat using similar lines. The Tancook Whaler is one of those boats which evolved over many decades to do a...

Tahitiana Full Plans PDF

32' steel sailing cruiser "TAHITIANA" - 32' Sailboat, steel. Redesign of Jack Hanna's famous "TAHITI". Ketch or cutter rigged. 31' 6" LOA, Beam 10' 2", Draft 4' 4". Displacement 14,000 to 18,000 lbs. Includes arrangements, lines, table of offsets,...

North Pacific 60 Plans

The North Pacific 60 is a long range comfortable cruising yacht. Designed originally for a client in Hong Kong for use in the Philippines she has a wide beam and relatively shoal draft with a centreboard to enable her to get into anchorages...

49' Red Grouse Plans

This was originally a design contract for the detailed refit drawings for a canoe sterned wood hull which had been totally stripped of it's original accommodation, decking, rig etc. We drew up a new design which has sleeping accommodation for 8 in...

Nordia 10 Plans

This design is for a Norwegian who's brief was for a fast offshore and ocean cruising yacht which would incorporate an ample aft cockpit as well as a comfortable inside steering position with bunks for 5 to 7 people. The client is presently building the...

Martlet 30 Gaff Cutter Plans

This is a design commissioned by someone who built one of our clinker ply Kane Suffolk Beach Punts and who wanted a safe, comfortable deep water cruising yacht which could also find it's way up relatively shallow creeks. For her length, she is to my...

50' Cape May Schooner Plans

This is a strip planked long range cruising yacht with comfortable accommodation for up to 9 crew. Apart from the open plan living space there are 2 separate cabins. She has a large aft cockpit with plenty of lounging space and space below is...

34' 6" Pinky Gaff Ketch Plans

Based upon the Pinky fishing boats of Maine and Nova Scotia this neat craft, instead of carrying the traditional cargo of sardines has been laid out with a roomy accommodation for 4 or 5 people in 2 separate compartments. Her double ended hull and deep...

36' Loosemoose Sharpie Plans

This 36' offshore cruising sharpie was originally commissioned by Bob & Sheila Wise who wanted to replace their 26' Bolger sharpie. She may be used as a floating office and home and, with her shoal draft, for coastal exploring where she will be able...

CR25 Cruiser Racer Plans

The CR25 (Cruiser racer 25) is a multi-chine ply yacht designed for easy unitized construction with ply bulkheads slotting into ply fore and aft girders to form the basic framework - the girders form cockpit seat and bunk fronts. Stringers are then...

Fulmar 26' 3" Plans

At 26'3" length on deck, the Fulmar is a heavy displacement cruising yacht which fits a spacious layout into a relatively short length. Her construction is of multi-chine ply extensively using pre-shaped ply bulkheads and girders. The forward...