Sailboat Gear

Cast Jam Cleat

A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for...

5/16" Viadana Linked Ball Bearing Block

A traveler block is used to run a sheet through a block that itself runs on a rope horse.   Since 1961, Viadana has produced and supplied sailing outfits, while offering a long history of experience in research, design, manufacturing, and marketing...

Vee Strap for Goat Island Skiff

These hiking straps are sized for your GIS or other small sailing vessel with a grommet on one end and a webbing loop on each of the other ends.

Hiking Strap for OZ Goose

These hiking straps are sized for your OZ Goose or other small sailing vessel with a grommet on one end and a webbing loop on the other end.

Foil Carrying Bag (for Goat Island Skiff)

These are quality zippered bags for the Goat Island Skiff standard centreboard and rudder. The bags will protect your beautifully finished foils from scratching, denting and other damage.Foils are at least as important as sails for your boats...

Tiller Lock Kit

This Tiller Lock Kit is a patent pending rudder locking device with unlimited variability designed for all tiller controlled boats. The locking of the tiller is effected by a short pull upward which causes the control line to be firmly locked around the...

Seadog Stainless Long D-Shackles

This Long D-Shackle features a proportionally longer length. Designed for rigging applications. Features a screw pin closure for quick removal, making them ideal for rigging applications where fast and/or repeated connecting and disconnecting are...

Ronstan Ropeglide Rings

Various sizes Text: Ronstan Ropeglide Rings. Reduce weight and complexity with ultralight, low-frticiton rings that can be used for deflecting lead lines or for barber haulers, lazy jacks, or as a replacement for blocks on vangs, etc. Simple and reliable...

Anchor Riding Sail

If you have a sloop or cat rigged boat and have ever been frustrated by it "kiting" or sailing around its anchor, this Anchor Riding Sail is what you need. It rigs between your mast and topping lift to produce a wind vane effect which keeps your boat...

Seadog Stainless D-Shackles

Note: size = pin diameter Above SD-147110 - SD-147108 - SD-147106 - SD-147104 - SD-147103 Forged 316 Stainless Part No. A B C BreakingStrength SD-147103 5/32" 3/8" 11/16" 1,540 lb. SD-147104 3/16" 7/16" 11/16" 2,200...

Ronstan Roller Furling Gear

Two furlers available & swivels RF76   Ronstan Above Deck Jib Furler SS ball bearing swivel unit. Fork & fork take-off with 6.4 mm (1/4") diameter Pins. Overall height 80 mm (3 1/8") Breaking Load: 3740 lbs.- Used on small dinghies and...

Racelite Adjustable Track Eye Slide

For travelers, jibs, sliding stays, etc. 1/4" diameter ring. 5/8" x 3/4" opening. Slide length 3" with thumbscrew for easy adjustment. Stainless steel construction. Fits 5/8" sailtrack.

Sailtrack Stops

black anodized aluminum and marine grade nickel plated brassChoose from:Round .50" dia. X .875" (13 x 22 mm)Flat .42 x 1 x .125" (11 x 25 x 3 mm)

Lev-O-Gage Inclinometer (clinometer)

The very first sailboat I ever owned had one of these. I learned to sail with that boat, but I moved on to other boats before I learned to use this gage. Sigh. Now that I understand how important heel is to the performance of a sailboat you can get all...

Air-Flow Tels

Lightweight, ripstop nylon Air-Flow Tels attach to sails with waterproof adhesive locator discs. No holes required. Tels show the air flow across the sails—allowing you to trim sails for maximum performance. Each kit includes 14 Tels and full...

Seadog Stainless Twisted Shackles

Note: size = pin diameter Forged 316 Stainless Part No. A B C Breaking Strength SD-147403 5/32" 5/16" 1-1/4" 1540 lbs SD-147404 3/16" 3/8" 1" 2,200 lbs SD-147406 1/4" 1/2" 1-1/4" 3,300...

Balch Boats "Stow-A-Way" Sail Tie System

Stow-A-Way® eliminates the need for all sail ties, is easy and convenient to use and self-stows under the boom until needed.Stow-A-Way® requires only simple tools and about 20 minutes to install, is made of high-quality materials and is an excellent...

Spar-Fly

Spar-Fly combines needle bearing balance, high impact plastic, and marine grade metals for unsurpassed sensitivity and durability. Spoiler holes in the vane reduce lift and increase accuracy. Spar-Fly is unaffected by angel of heel. Easily seen from...

Seadog 10" Floating Winch Handle

All new, patent pending design is made by way of air assist injection molding instead of foam filled method, thus preventing any potential leakage of foam from within the handle. Features ball bearings in the handle to ensure smoother action under load...

Windex 10.Sport Wind Vane

Windex wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia vane, and easy-to-read, fully adjustable tacking tab system.

Seadog Stainless Trigger Snap

Investment Cast 316 Stainless Steel.

SeaDog Telescoping Boat Hook

Sea-Dog® boat hooks are constructed of marine grade aluminum tubing with a threaded end attachment and comfort grip handle. Add in a four-point hook attachment from a over-molded soft rubber coated hook, that protects your boat from scuffs and...

Seadog Stainless Fixed Eye Snap Shackle

Investment Cast Stainless Steel. This is also the factory West Wight Potter halyard shackle. Part Number A B C D SD-143520 2-1/4" 3/8" 9/19" 3/8"

Racelite Tiller Extension Swivel

Often you want a push-pull tiller extension so that you can steer the boat from up on the rail or even from the bench seat if the boat is particularly beamy. This simple swivel from Race-Lite will fill the bill. Two round head #8 or #10 screws mount it...

Plastic Parrel Beads

6 Colors - 6 Shapes - Many Uses Cylinder - This is a good shape for a parrel, not traditional, but I can't see why it would not work just fine. Cube - Obviously this bead will NOT work! But it may have other uses. Let me know...

Seadog Stainless Swivel Eye Boat Snap

Investment Cast 316 Stainless Steel. Part Number A B C SD-146131 3-5/16" 7/16" 3/4"

Nylon Internal Flat Sail Slides

The strong reliable standard for external sail tracks. Attach with stainless shackles or lace them on. Fits 5/8" Aluminum track. You may consider using our sailmaker's D-shackles rather than lace or stitch these slides to your sail.

Sail Repair Kit

Contents:  A 5-pack of needles, 6 spools of sailtwine, and a palm. 

Ronstan Urethane Universal Tiller Extension Joint

Smooth, uniform rotation in all directions and a quick, firm reponse to steering movements. The RF3133 universal joint with snap-on cover is designed to allow quick fitting and removal of the tiller extension from the fixed base. A curved surface...

Teak Handrails

We brought these solid teak handrails in to service West Wight Potter owners, as the small one-loop rail is OEM for the Potter 15 and the larger 3-loop is OEM for the Potter 19, but these beautiful, smooth-finished teak handrails would work on any small...

5/8" Stainless Sail Slides

The strong reliable standard for external sail tracks. Attach with stainless shackles or lace them on. Fits 5/8" external sail track. You may want to use our sailmaker's D-shackles rather than lace or stitch these slides to your sail.

Brass Jib Hanks

Brass - 2 sizes Long an industry standard, these piston hanks are strong, durable and easy to install. Insert the tab into the grommet and press it closed. Part # size wire length CH-FP0 0 5/64" 1-3/4" CH-FP1 1 5/16" 2-3/32"

Rubbaweld Rigging Tape

Clevis pins and rings can get hooked on line or otherwise pulled out and consequences can be disastrous. On stayed rigging we suggest wrapping your turnbuckles and other pinned fittings to make sure they don't get snagged or wiggle lose—especially if...

Tiller Cover

If you have a boat with a nice, varnished tiller, you know that it is just a matter of time before the sun does a number on that lovely finish. Our tiller covers are made of Top Gun marine fabric, one of the strongest and most durable boat fabrics...

CoolCatcher Wind Scoop

Cool Catcher - made from 1.8 oz ripstop nylon (very strong and long lasting). Catches the wind from whichever direction you point it and funnels the cool breeze down into the boat's cabin. You can use it in a forward hatch or the main companionway...

Seadog Sailmaker's D-Shackles

Stamped 304 Stainless - Made in Denmark These shackles have many potential uses but their primary function is for use attaching sail slugs and slides to grommets. Part No. A B C Breaking Strength SD-140154 3/16" 1/2" 1-1/16" 2,640 lbs...

Nylon/Stainless Sail Slugs

Stitched to a sail's luff, these slugs allow sails to more easily go up and down a bolt rope slot. To raise the sail, insert the slugs into the slot rather than the boltrope. You may want to use our sailmaker's D-shackles rather than lace or stitch...

Red, White & Blue Pennants

Add a dash of color to your sailboat. These ripstop nylon pennants will flutter brightly in the slightest breeze. Brass grommet allows you to tie to your sail or halyard.Red, White and Blue ones are about 5" x 66"

Single Color Pennants

Add a dash of color to your sailboat. These ripstop nylon pennants will flutter brightly in the slightest breeze. Brass grommet allows you to tie to your sail or halyard.

TillerClutch

Conveniently mounted below the tiller - it's out of the way but easy to access. No knobs to turn, no friction to fight, nothing to strip out or snap off. The TillerClutch is made from anodized aluminum and stainless steel. Simple on/off lever is easy to...