Rhum 12.3 Plans

This new design is based on the Mark 1 single chine version of the Rhum 11'6" general purpose dinghy. The original Rhum has been extended by 12" which gives more space for her to be fitted out as a proper camping dinghy with space for a sleeping area and...

Fisher Swampscott 12' Plans

This is the first of a new line of dinghies and dories which combine traditional looks and performance with quick and easy methods of construction. We have been able to modify the normal clinker plank shapes for this boat so that they can be stitched...

6' Doracle Plans

Designed for a client who wanted a simple stackable fishing dinghy which he could easily carry himself, the Doracle uses just 2 sheets of 4, 5 or 6mm ply. She may be built in 2 pieces with the forward piece stacked inside the aft section. The 2 halves...

12/14' Hobo Plans

A client contacted me with the requirement for a self build or kit club racing dinghy for her daughter as a step up from the Mirror dinghies and which could also be built quickly and cheaply by a youngster. The HOBO 12 is the result. LOA...

Petrel 13' Catboat Plans

13’x 6’x 8‘‘(2’9’’ with board down). A miniature cat boat of traditional design given modern construction techniques. Using the stitch and tape method with pre-shaped ply hull panels weight, cost and building...

Rhum 11'6" Plans

This is a very simple 11’6’’x5’ ‘V’ bottomed dinghy for general purpose use. Her ‘V’ bottom and 5’ beam gives her both stability and a good turn of speed under both oars and sails. She can be built as...

Medway Doble 12'6" Plans

The Medway Doble was drawn up for Mr. John Lidstone who, having already built one of our Highlander dayboats, wanted a lightweight, car toppable craft of double ended shape suitable for river and estuary rowing and sailing. She has plenty of room...

Rockland 11' Plans

This dinghy was developed from our Skylark Mk 2 series of pram dinghies. The dinghy retains the flat, rockered bottom panel and the side panels are round bilge in shape and are either cold moulded or strip planked over the moulds which are drawn full...

YW Heron Plans

Heron class sailing dinghy was originally designed by Jack Holt and has been around now, for many years - many sailors first took to the water in a Heron and she remains a positive favourite amongst young and old alike with a very active Class...

13' Woodlark Catboat Plans

Very much on the lines of the American Cat Boat, we have been able to retain much of the character of these charming boats by using a round bilge hull shape simply made using strip planks over chipboard moulds. The planks can be of most easily...

Sunray 11' Plans

The Sunray was designed for Brightwater Boats - she is built using the clinker ply method with the ply frames and girders set up together on a strongback. She has a foredeck and aft tank plus side benches. Note - the plans do give computer...

Today 11 Plans

This useful dinghy was commissioned from us by the magazine SAILING TODAY and features as a series of articles on her construction in the Feb, March and April 1999 issues. the magazine wanted a simple but attractive plywood craft to be built using...

11' South Coast Scow Plans

The clinker scow is a very popular little dinghy on the South Coast of England. Many are raced regularly by enthusiasts and many a big boat sailor learnt their seamanship on boats such as these. We were asked to draw up this example to replace a...

Cegall 11' Plans

The Cegall has been designed for Chippendale Craft and is very much based upon the 14' Kingfisher design. The method of construction is just the same with a pre-shaped ply centre girder forming the centreboard case and stem - this is epoxied to the...

12'4" Petite Brise Plans

We have 4 or 5 Swampscotts (plus several other Dories of different type) with their rockered bottom panel and rounded topsides. The Petite Brise 12'4" Dory Skiff was designed to be used as the new tender for the famous Jolie Brise French Pilot...