Scamp Foils Kit

The SCAMP foils kit includes precision cut rudder and centerboard pre-shaped in halves cut from 18MM Okoume plywood. Save a lot of time and effort with these beautifully shaped foil blanks. Shipping defaults to $50 but we will contact buyer to adjust if...

SCAMP CNC PLYWOOD KIT

We're pleased to offer the highest quality precision CNC kit for the SCAMP design. The kit includes all hull related plywood components (planks, bottom, bulkheads, seats, cabin, decks, etc.). The kit is very well thought out incorporating many...

Sail Bags for OZ Goose and Goat Island Skiff

These sailbags are made by RSS and are intended for the OZ Goose and Goat Island Skiff but can be used for a variety of sails that are rolled and stored with spars. The dimensions are with the bags flattened.RSS Oz Goose Custom SAILBAG GREY 3.400 MTR...

S.C.A.M.P. Plans Instant Download

S.C.A.M.P. (Small Craft Advisor Magazine Project) For printed plans click HEREOriginal Designer: John Welsford Additional Development: Kees Prins Kit Adaptations: Turn Point DesignOur own youthful dreams often featured small boats in starring roles...

Longsteps Full Size Printed Templates

Note:  you will also need the plans in order to build this boat. Thanks to our friend Joel Bergen, we are now able to offer full size patterns for bulkheads, stems and other parts for Longsteps. The Longsteps patterns come in the form of three 36" x...

Longsteps Full Size Template Instant Download

Note:  you will also need the plans in order to build this boat. Thanks to our friend Joel Bergen, we are now able to offer full size patterns for bulkheads, stems and other parts for Longsteps. These come in two basic formats. The first is a series...

Vee Strap for Goat Island Skiff

These hiking straps are sized for your GIS or other small sailing vessel with a grommet on one end and a webbing loop on each of the other ends.

Hiking Strap for OZ Goose

These hiking straps are sized for your OZ Goose or other small sailing vessel with a grommet on one end and a webbing loop on the other end.

GIS or Viola Hiking straps - pair

These hiking straps are sized for your Goat Island Skiff or Viola sailing canoe with a grommet on one end and a webbing loop on the other end.  

Scout Deck Hardware and Hatches Package

Includes: Phenolic tube for rails (1) 10” Select Hatch (K746209)  (2) SeaDog Black 8” Deck Plates (SD-336185) (4) Fluted knobs for adjustable thwarts (IC-KNxC-1/4-20) (2) Exit blocks for centerboard (VIA10.59) (1) Cam cleat for CB (VIA25...

Viola Lug Hardware Packages

Hull Hardware Inspection ports for buoyancy tanks - (2) SD-337160 Screw-out Deck Plates - 6" White Bow Eye - SeaDog SD-080288 - 8mm x 4-1/2" Stainless U-Bolt Mast Hardware Mast cleat on side of mast: 1 Nylon Cleat - black, 4"-SD-043040 Mast top...

Viola Lug Rigging Packages

Viola Lug Lines Package Spar lacing - 36 ft, Polypropylene VB braid 1/8" Spar corner lashings -10 feet of 1/8" 12 strand Amsteel Halyard - 40 feet of 5mm Marlow Excel Racing Downhaul -18 feet of 4mm Marlow Excel Racing Traveler/Bridle -11...

Long Steps Sail Hardware Package

Here is John Welsford's recommended list of sail rigging hardware for Long Steps QTY Link Item 19 RF134 Saddle 6 RL-308-A Cheek Block 1 RL-708-AD Double Cheek Block 6 SD-043050 5" Nylon Horn Cleat 3 SD-088721 Cast Eye...

Long Steps Lines Kit

This package includes: 115' of 3.5mm" Polyester Raid Braid Line 131' of 3/16" Polyester Raid Braid Line 115' of 1/4" Polyester Raid Braid Line 100' of 5/16" Polyester Raid Braid Line When you buy the kit, colors will be picked for you - If you want...

Foil Carrying Bag (for Goat Island Skiff)

These are quality zippered bags for the Goat Island Skiff standard centreboard and rudder. The bags will protect your beautifully finished foils from scratching, denting and other damage.Foils are at least as important as sails for your boats...

2 X 88 Digital Sail Numbers

Polyester “Digital” adhesive sail numbers 12” high in black. If demand is sufficient we will provide numbers in white for Tanbark Sails and other sizes. One standard set will do sail numbers from 01, 02, 03 through to 99. A second set...

2X OZ Goose/OZ Racer Sail Insignia

Polyester adhesive Insignia Port and Startboard for Oz Goose and OzRacer. The Oz Goose insignia has a horizontal bar beneath the superimposed OZ – the OzRacer insignia does not have the bar as per the illustration above. It is typical to place...

San Francisco Pelican Hardware Package

We’ve assembled all of the essential hardware for a Pelican build (or restoration) into one package. Based on the legendary Pelican builders, Smith’s Boat Shop’s hardware kit, this package includes wire for bobstay and shrouds, all...

OzGoose Epoxy Kit

Our custom Epoxy kit for OzGoose contains: 1.5 gal. Raka Epoxy Kit - (select speed above) 50 yds. 6 oz., 2" tape 16 oz. silica thickener 4 yds. 6 oz., 50" fiberglass cloth  This kit contains enough supplies for the average builder...

OZ Goose/OZ Racer Downhaul&Outhaul Kits

Contents: Quick adjust downhaul On deck - Ronstan Fiddle, V-jam Cleat Utility Block - RF187 x 1 On boom - Ronstan Double, loop head Utility Block - RF81 x 1 Adjustable outhaul Outhaul deadeye - 7/16" Ronstan Fairlead -...

OZ Goose/OZ Racer Mainsheet Hardware Kit

Included: Halyard Deadeye - Stainless Ring - SD-191410 x 1 Halyard Cleat - 4" Black Nylon Cleat - SD-043040 x 1 Mainsheet end boom block - 5/16" Single Block - RL-301-A x 1 Mainsheet mid boom block - 5/16" Single...

OZ Goose/OZ Racer Lines Kit

Included: Main halyard - Marlow Racing Excel - 4mm x 30' (9m) Downhaul - Marlow Racing Excel - 4mm x 9' (3m) Corner lashing for sail - Spectra 12 strand - 1/8" x 13' (4m) Sail lacing - VB Cord - 3mm x 14'...

Long Steps Plans PDF

Long Steps For Long Steps Study Plan PDF, click HERE For Long Steps Printed Plans, click HERE LOA 19'6" Beam 5'7" Draft 3'8"/8" Water ballast 265 lb Sail Area 136 sq ft Max load 1056 lb   I think that I’ve mentioned before, that in my plans...

RowCruiser Epoxy & Cloth Package

Most of the major supplies necessary for the construction of your Angus Rowcruiser (rowing version). Package includes 5.25 gallon epoxy kit, 3 pounds of wood flour, 20 yards of 6 oz fiberglass cloth, and one roll of 6 oz x 3” glass tape. 

Scout Daggerboard and Rudder Package

CNC DAGGERBOARD AND FOILSFoils (rudder and daggerboard)2 yards 6oz. Fiberglass Cloth

AMA Add on Kit for Angus Sailing Rowcruiser

AMA Add on Kit for Angus Sailing Rowcruiser This kit includes the CNC plywood ama panels as well as several other sail rig support pieces. This kit also includes a set of Sailing Rowcruiser plans with one full-size sheet for tracing foils and other...

RSS Viola Sailing Canoe Lugsail

Viola Sailing Canoe - 68sf (6.3sqm) LugFor Viola plans, click HERE This link will take you to the page to download a guide to size sails and spars for a non storer boat. https://reallysimplesails...

Scout Sailing Package

This package contains: Either just the the Scout Sail, or the sail plus the followoing: 2-piece carbon mast Running rigging package: 1 Double block for downhaul Via 8.05 1 Triple block V-jam for downhaul Via 8.11 12 feet 4mm Marlow Excel for...

Scout Epoxy and Fiberglass Package

This kit includes the following: 3 Gallon RAKA Epoxy 1.5 pint Quikfair 1 lb Wood Flour 1 lb Glass bubbles 25 yards 4 oz fiberglass cloth 1 roll 50 yard 1” tape Wooden Dowels for Doublers (36) Gloves (10 sets) Mixing cups (6) Mixing sticks...

Scout CNC Kit

Kit includes: All plywood parts—hull, decks, seats, etc   Scout LOA-10' 4" Beam- 50" Draft- 4 1/2" Capacity- 2-3 people Weight- 65 to 75 lbs Simplicity means the achievement of maximum effect with minimum means. —Koichi Kawana What does...

Scamp Hardware

Deck Cleats 6 SD-041606 6" stainless deck cleats for docklines Pintles and Gudgeons1 set RL490-SCAMP Heavy-duty Scamp-specific pintles and gudgeons Hatches*There are lots of ways to hatch Scamp—this is just one suggested simple...

Goat Island Skiff Lines Packages

GIS Lines Package Spar lacing - 36 ft, Polyester VB braid 1/8" Spar corner lashings -10 feet of 1/8" 12 strand Amsteel Halyard - 40 feet of 5mm Marlow Excel Racing Downhaul -13 feet of 4mm Marlow Excel Racing Traveler/Bridle -11...

Portage Pram Oarlock Package

OARLOCK PACKAGEBuck Algonquin bronze oarlocks (5RIB) 2-1/4" round oarlocks (you can request open horn-style oarlocks if preferred) Three pairs of injection molded polypropylene oarlock sockets (SeaDog 580699) for fine adjustment of location of rowing...

Portage Pram Epoxy Tools

EPOXY TOOLS CNC Fillet sticksSix 16 oz measuring cupsPack of 10 nitrile gloves (large)Mix sticks (12)2" Chip brushes (4) Wood dowells (24)Plastic squeeges (6)

Portage Pram Daggerboard and Foils Package

CNC DAGGERBOARD AND FOILSDaggerboard trunkDaggerboardRudder partsTiller blankMast partner tube1 yard 6oz. Fiberglass Cloth 1 set of RL-358W pintles and gudgeons1 RL-336 Rudder hold down1 SD-081102 for downhaul and towing eye1 RL-301-B5 sheave for kickup...

Portage Pram Epoxy Package

EPOXY AND GLASS KIT1.5 gal kit of RAKA Epoxy1 pair of Epoxy Pumps4 yards 4 oz Fiberglass cloth1 lb wood flour200 4-inch zip ties

SCAMP Rigging Kits

Boom and RUNNING RIGGING plus Hardware 2 10-foot lengths of 3/16" Raid Braid for 1st Reef2 20-foot lengths of 3/16" Raid Braidfor 3rd Reef4 SD-043030 3" cleats for reefing lines1 60-foot length of 3/16" Raid Braid for Topping / Lazy jack system (cut to...

Rudder Hardware for Scamp

This set is recommended by John Welsford for Scamp. The tangs are 2-1/8 inches wide and the pintles have a sturdy 3/8" pin.This set consists of two gudgeons and two pintles. There is no hold down included. All parts are stainless steel. (note: pintle...

Goose Explorer Full Plans PDF

a Newer version of the discontinued Ooze Goose. The full plans contain both the OZ Goose plans and the Explorer Supplement - both are needed to build this boat. If you already have the plans for OZ Goose, you can build the Explorer by also purchasing the...

Deluxe Goat Island Skiff Epoxy Kit

The Goat Island Skiff epoxy kit contains the following: 1-1/2 Gallon System3 Silvertip epoxy kit (choose speed above) 1 lb. wood flour 8 oz. silica thickener 3 yards of 6 oz. x 50" fiberglass cloth for foils 1 roll of 2" wide fiberglass tape If...

OZ Goose/OZ Racer Rudder & Tiller Hardware Kit

Included: (2 each) Ronstan RF254 & RF239 + 2ft 1/4” stainless rod (1) Ronstan Urethane Universal Tiller Extension Joint RF3133

S.C.A.M.P. Printed Plans

S.C.A.M.P. (Small Craft Advisor Magazine Project) For Plans Instant Download, click HEREOriginal Designer: John Welsford Additional Development: Kees Prins Kit Adaptations: Turn Point Design Our own youthful dreams often featured small boats in starring...

SEI Printed Plans

For a Study Plan Download, click HERE   For a Full Plan Digital Download, click HERE   I really like double ended boats, they have a grace and beauty that the blunt ended craft don't have, but I wanted one that would meet a particular set of...

Goat Island Skiff Epoxy Kit

This Goat Island Skiff epoxy kit contains the following: 1-1/2 Gallon RAKA epoxy kit (choose speed above) 1 lb. wood flour 8 oz. silica thickener 3 yards of 6 oz. x 50" fiberglass cloth for foils 1 roll of 2" wide fiberglass tape If you wish to...

Skate Epoxy and Fiberglass Kit

All the epoxy and fiberglass you need to build a Skate

RowCruiser (Angus Rowboats' Cruising Rowboat) Kit

CRUISE AT YOUR OWN PACE! There's an exciting new class of high-performance rowing boat from the drawing board of small-craft adventurer Colin Angus: The RowCruiser. This revolutionary 19-foot adventure craft will take you anywhere and everywhere in...

Hardware and Lines Kit for Angus Sailing Rowcruiser

Hardware and Lines Kit for Angus Sailing Rowcruiser The Duckworks part of the list of hardware bits for the Angus RowCruiser as shown on the Angus Row Boats website. A complete list of items in the kit:   Complete Set 1 3/8" Pintle and Gudgeon set...

RSS Goat Island Skiff Sail

Goat Island Skiff RSS Sail Specifications GIS sail 105 square feet 3 reefs laced on foot but can be set loose footed 5 ounce cloth telltales Really Simple Sails is a Philippine owned business that works closely with Michael Storer Boat Plans to...

Goat Island Skiff Hardware Packages

Hull Hardware Inspection ports for buoyancy tanks - (2) SD-337160 Screw-out Deck Plates - 6" White Bow Eye - SeaDog SD-080288 - 8mm x 4-1/2" Stainless U-Bolt Mast Hardware Mast cleat on side of mast: 1 Nylon Cleat - black, 4"-SD-043040 Mast top...

SEI Hardware and Rigging Kit

1 - Weekender Rudder Hardware Set (includes pins and rings) RL-WK 1 - 1/2" Stainless Pad Eyes SD-081102 2 - RL-317-S--2-1/4" Boom Bail RL-317-S 1 - 3/16" Twisted Shackles SD-147404 1 - 7/16" (11mm) Racelite Single Blocks RL-601-B 1 - 7/16" (11mm)...