Misc

  • Andersen Mini Bailer

    Andersen Mini Bailer

    The ANDERSEN automatic bailers are available World Wide and recogized by dinghy sailors as the most effective and reliable means of automatic bailing. ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service...

    $69.79
    Add to Cart
  • Daggerboard Spring Retainer

    Daggerboard Spring Retainer

    Made of spring stainless steel, these retainers are used on Sunfish and many other production sailboats to keep the daggerboard down yet allow it to be easily withdrawn...

    $3.89
    Add to Cart
  • Nylon Jib Hanks

    Nylon Jib Hanks

    Nylon - 3 sizes - Easy to install, just slip over the headstay and twist 90° for a postitve lock. Each comes with a stainless screw for easy jib attachent. Can also be used for pennants or flags also. - Easy to install, just slip over the...

    $0.60 - $1.06
    Choose Options
  • Racelite 1/2" Stainless Tangs

    Racelite 1/2" Stainless Tangs

    Stainless Steel These tangs are made from 0.062" stock and have 3/16" dia holes in the ends. The hole centers are 1/2" from the ends. Nominal lengths are not from hole centers but total overall length.

    $1.61 - $2.92
    Choose Options
  • Racelite 3/4" Stainless Tangs

    Racelite 3/4" Stainless Tangs

    These tangs are made from 0.062" stock and have 3/16" dia holes in the ends. The hole centers are 3/8" from the ends. Nominal lengths are not from hole centers but total overall length.

    $1.95 - $3.54
    Choose Options
  • Racelite Adjustable Track Eye Slide

    Racelite Adjustable Track Eye Slide

    For travelers, jibs, sliding stays, etc. 1/4" diameter ring. 5/8" x 3/4" opening. Slide length 3" with thumbscrew for easy adjustment. Stainless steel construction. Fits 5/8" sailtrack.

    $11.87
    Add to Cart
  • Racelite Bow Fitting

    Racelite Bow Fitting

    All Stainless heliarc welded construction for extra strength. 3-1/4" long by 1-1/2" wide, tapering to 5/8" at ends. Holes take # 10 flat head screws or bolts. Fin is 2-1/2" long & 1/8" thick with (2) 1/4" holes and (1) 3/8" hole. Complete with matching...

    $13.11
    Add to Cart
  • Racelite Deck Plate

    Racelite Deck Plate

    This stainless steel deck plate can be used with our RL-349 shroud adjuster or RL-305-A or RL-205 blocks. It comes complete with clevis pin and ring. wt 1/2 oz.

    $3.82
    Add to Cart
  • Racelite Deck-Plate

    Racelite Deck-Plate

    This stainless steel deck plate can be used with our RL-305-B blocks. Takes #8 RH screws. Base 2-1/2" long. Stainless steel. You may need a 5/8" x 3/16" Clevis Pin

    $2.85
    Add to Cart
  • Racelite Halyard Shackles

    Racelite Halyard Shackles

    Stainless Steel Light, fast, positive. No cotter pins, New spring tension captive pin maintains steady pressure on sides of shackle undersailing conditions, and allows easier opening for quick release. Stainless steel spring.

    $6.30 - $7.69
    Choose Options
  • Racelite Medium Duty Eye Strap

    Racelite Medium Duty Eye Strap

    Made of 3/32" Stainless Steel with mounting holes for #10 fasteners on 1-1/2" centers, 9/16" diameter eye. RL-413A1/2in.B5/8 in.C1-1/2 in.Weight.01 lb.

    $2.16
    Add to Cart
  • Racelite Reefing Hook

    Racelite Reefing Hook

    Reefing Hook - Mount this hook under the Tack Shackle for quick reefing - hook the reef tack under this hook. The base is 1/8" thick and 1.5" x 0.75". The two hooks are made from 1/4" dia. round stock. The mounting hole is 1/4" dia. There is a little...

    $8.63
    Add to Cart
  • Racelite Small Stem Fitting

    Racelite Small Stem Fitting

    Built with a stem for extra strength. Base 3" long by 1.5" wide tapering to 5/8". Stem is 4" long, 5/8" wide & 0.085" thick w/ 3 1/4" holes. Takes up to 6 #10 screws. Fin has two 1/4" holes and one 3/8" hole. All stainless steel construction.

    $14.24
    Add to Cart
  • Racelite Small Swivel

    Racelite Small Swivel

    Stainless steel swivel. Strap is 0.06" by 3/8". 3/8"+ between tangs. 1-5/8" long over all.Takes 3/16" x 1/2" pin.

    $3.93
    Add to Cart
  • Racelite Stainless Chain Plates

    Racelite Stainless Chain Plates

    Stainless Steel Chainplates transfer the stress from standing rigging down into the hull. They may also have other uses for all kinds of applications. Use your imagination. Premium stainless steel made in the USA by Racelite. Cat No...

    $2.28 - $5.11
    Choose Options
  • Racelite Stainless Deck Straps

    Racelite Stainless Deck Straps

    Stamped Stainless SteelPart No.OpeningWidthLengthFastenersRL-314-A3/8" x 3/8"3/8"3"#8RL-314-B7/16" x 7/16"1/2"3-1/2"#8RL-314-C5/8" x 5/8"1/2"3-7/8"#8

    $2.16 - $2.85
    Choose Options
  • Racelite Stainless Eyes

    Racelite Stainless Eyes

    Stamped Stainless Steel Stamped stainless eyes. Both eyes made from 0.075" strap. Part Length Width Eye Width Hole dia. RL-311 2-1/4" 1/2" 3/4" 3/16" RL-313 1-1/2" 3/8" 3/8" 3/16"

    $1.27 - $2.02
    Choose Options
  • Racelite Stainless Spin Strap

    Racelite Stainless Spin Strap

    The RL-318 Spin Strap from Racelite is used to connect a block to a spar or just about anywhere else. Use with block RL-305-A or RL-205. Takes #10 screws. Weighs 1/3 oz. Here it is used to attach an RL-205 to the top of the mast on our Ladybug sailboat.

    $2.78
    Add to Cart
  • Racelite Stem Fitting

    Racelite Stem Fitting

    All Stainless heliarc welded construction for extra strength. 3-1/4" long by 1-1/2" wide, tapering to 5/8" at ends. Holes take # 10 flat head screws or bolts. Fin is 2-1/2" long & 1/8" thick with (2) 1/4" holes and (1) 3/8" hole. 

    $14.56
    Add to Cart
  • Removable Outboard Motor Bracket

    Removable Outboard Motor Bracket

    A customer wrote and wanted to convert a 24 ft. sailboat into a motor cruiser but needed to mount the outboard in the middle of the transom rather than off to one side. Further, he wanted to be able to remove the motor and hang the rudder so he could go...

    $86.25
    Choose Options
  • Ronstan Brace Hook

    Ronstan Brace Hook

    Brace hooks are used instead of barber haulers, to hook in the windward spinnaker sheet after gybing.Stainless steel hookNeoprene pad

    $17.75
    Add to Cart
  • Ronstan Closed Thimbles

    Ronstan Closed Thimbles

    Make eyes in rope or wire ropeRonstan ThimblesCable Ø1/8"1/4 in.A11/32"13/16 in.B3/16"11/32 in.C5/8"1 5/16 in.Weight0.1 oz.0.7 oz.

    $6.95 - $8.50
    Choose Options
  • Ronstan Halyard Shackle

    Ronstan Halyard Shackle

    These halyard shackles have a lever action for easy opening and closing, with a keyed pin for positive locking.Grade 316 stainless steel bodies and pins ReferenceImperialMetricA3/16 in.4.8 mmB7/8 in.22.0 mmC13/32 in.10.5 mmD19/32 in.15.0 mmP.L. B.L.1980...

    $17.96
    Add to Cart
  • Ronstan Medium Fairlead V-Cleat

    Ronstan Medium Fairlead V-Cleat

    V-Cleats are a simple solution to cleating lines under moderate loads.Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system. Features: Lightweight and corrosion proof Greater abrasion resistance than traditional plastic...

    $10.88
    Add to Cart
  • Ronstan Ropeglide Rings

    Ronstan Ropeglide Rings

    Various sizes Text: Ronstan Ropeglide Rings. Reduce weight and complexity with ultralight, low-frticiton rings that can be used for deflecting lead lines or for barber haulers, lazy jacks, or as a replacement for blocks on vangs, etc. Simple and reliable...

    $10.64 - $15.95
    Choose Options
  • Ronstan S-Hooks

    Ronstan S-Hooks

    316 Stainless Reference RF48A RF49 A 13/32 in. 13/32 in. B 13/32 in. 7/16 in. C 2-17/32 in. 2-15/16 in...

    $5.91 - $8.59
    Choose Options
  • Ronstan Small Fairlead V-Cleat

    Ronstan Small Fairlead V-Cleat

    V-Cleats are a simple solution to cleating lines under moderate loads.Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system.Features:Lightweight and corrosion proofGreater abrasion resistance than traditional plastic...

    $8.43
    Add to Cart
  • Ronstan Snap Shackle

    Ronstan Snap Shackle

    Ronstan 2 1/8" (54mm) Fixed Bail Snap Shackle. Stainless Steel snap shackles have many uses aboard boats of all sizes. FeaturesA - 7/16 in. (11mm)B - 3/8 in. (10mm)C - 2 1/8 in. (54mm)Weight - 1.6 oz. (47g.)

    $10.91
    Add to Cart
  • Ronstan Swivel Cleat Base

    Ronstan Swivel Cleat Base

    Alloy cleating arms Grade 316 stainless steel fittings Swivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy guage alloy for stiffness and...

    $62.93
    Add to Cart
  • Ronstan Urethane Universal Tiller Extension Joint

    Ronstan Urethane Universal Tiller Extension Joint

    Smooth, uniform rotation in all directions and a quick, firm reponse to steering movements. The RF3133 universal joint with snap-on cover is designed to allow quick fitting and removal of the tiller extension from the fixed base. A curved surface...

    $13.13
    Add to Cart
  • Round Brass Thimbles

    Round Brass Thimbles

    Round Brass Thimbles are handy for making authentic rope stropped blocks and many other uses. Scroll down for some examples. CH-FTHE - CH-FTHD - CH-FTHC - CH-FTHB - CH-FTHA Part # OD ID For Rope...

    $1.98 - $4.80
    Choose Options
  • Seadog Bronze and Stainless Pelican Hooks

    Seadog Bronze and Stainless Pelican Hooks

    Bronze or Stainless Quick release for rope or cable such as lifelines. Lately these have become popular for belts. Part No. A B C D SD-189780 4" 1/2" 3/8" 9/16" SD-189785 4" 1/2" 3/8" 9/16"

    $12.28 - $14.63
    Choose Options
  • Seadog Closed, Stainless Thimbles

    Seadog Closed, Stainless Thimbles

    Cast 304 Stainless Heavy duty stamped 304 stainless steel thimbles. These can be used for wire rope and are especially recommended for use with 12 strand Spectra line.For more sizes of these thimbles from Ronstan, click HERE Part...

    $1.25 - $1.44
    Choose Options
  • Seadog Eye Bolt with Shoulder

    Seadog Eye Bolt with Shoulder

    Made of machined 304 stainless steel. These are much nicer than our regular eyebolts. A B C D E B.S. 12 mm - 1.75 mm 5-1/2" 3/4" 3-15/16" 1-3/16" 10K Lbs.

    $24.75
    Add to Cart
  • Seadog Forged Brass Pad Eyes

    Seadog Forged Brass Pad Eyes

    These Pad Eyes are great for block attachment, controlling lead lines, or creating tie down points. Constructed forged brass wire. Installs with two FH fasteners (not included). Part # A B C Fastner SD-081270 5/16" 3/8" 1-3/8" #8...

    $2.35 - $2.99
    Choose Options
  • Seadog Heavy Stainless Steel Pad Eyes

    Seadog Heavy Stainless Steel Pad Eyes

    Forged 304 Stainless Heavy duty wire forged pad eyes. AISI 304 Stainless Steel. Part # A B C Fastner Wt. SD-081200 5/16" 3/8" 1-3/8" #8 FH .03 lb. SD-081205 3/8" 1/2" 1-5/8" #10 FH .05 lb.

    $2.10 - $2.85
    Choose Options
  • Seadog Stainless Eye & Jaw Swivels

    Seadog Stainless Eye & Jaw Swivels

    Note: size = diameter of pin Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of corrosion resistant investment cast 316 stainless steel these jaw to jaw swivels are...

    $7.34 - $12.18
    Choose Options
  • Seadog Stainless Eyebolts

    Seadog Stainless Eyebolts

    Machined 304 Stainless Used for bow eyes or anywhere a secure attachment point is needed. Metric threads. Part No. A B C D ThreadLength SD-080708 8mm(5/16") 109mm(4-5/16") 17mm(11/16") 76mm(3") 79mm(2-3/4") SD-080710 10mm...

    $5.38 - $7.98
    Choose Options
  • Seadog Stainless Jaw & Jaw Swivels

    Seadog Stainless Jaw & Jaw Swivels

    Note: size = diameter of pin Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of corrosion resistant investment cast 316 stainless steel these jaw to jaw swivels are...

    $8.06 - $9.53
    Choose Options
  • Seadog Stainless Pad Eyes

    Seadog Stainless Pad Eyes

    Stamped pad eyes - strong and economical. Made from 304 stainless steel. Part # A B C D E SD-081101 7/16" 7/16" 1-1/8" .060" 5/32" SD-081102 1/2" 9/16" 1-3/8" .080" 3/16" SD-081103 3/4" 3/4" 1-3/4" ...

    $0.82 - $1.80
    Choose Options
  • Seadog Stainless Snap Hooks

    Seadog Stainless Snap Hooks

    Note: size = diameter of stock I always called these "caribiners" but "Snap Hook" works too. Don't confuse these with the cheap, aluminum ones you see at discount and big box stores for 99¢, though. These are quite robust and won't dissolve in...

    $1.75 - $4.34
    Choose Options
  • Seadog Stainless U-Bolts

    Seadog Stainless U-Bolts

    Machined 304 Stainless Used for bow eyes or anywhere a secure attachment point is needed. Metric threads. The outer mounting plate is held held in place by crimped ears forged into the U-Bolt. Part No...

    $10.12 - $13.63
    Choose Options