Epoxy Tools, Supplies

This product has long been the worldwide standard for general purpose surface conditioning by hand. This is the go to tool for removal of amine blush. Also perfect for a final prep of paint and varnish between coats. This will hit all the low spots that...

For Paint or epoxy application Shur-Line Foam Mini Roller. These are the rollers many of our professional builders swear by for roll-and-tip painting of their boats. Quick Pro, sturdy 4-inch foam roller cover, 12 inch threaded handle, high density...

There are a lot of different ways to hold boats together for the stitch and glue process. Sometimes you even want to use more than one as some are easier to adjust while others are stronger. So in addition to standard copper wire, we now are offering...

Notched spreaders have several uses - for spreading adhesives evenly where large surfaces have to be joined. Also for fairing where you spread fairing compound with the notched spreader, sand the ridges down with a longboard then fill the gaps in and...

Plain old wooden tongue depressors like the doctor used on you when you were a kid and it made you gag. Hint: Sand or saw the rounded end off for mixing epoxy so you can scrape the bottom of the mixing cup throroughly.

To dispense small amounts of liquid 4 oz. - Bottle: 118cc (cap included)8 oz. - Bottle: 236cc (cap included)Pump: 2cc per strokeBoth bottles, pumps and caps have 24-410 Thread

Sometimes called "mustard pumps," these dispensers deliver a measured amount of any brand laminating epoxy, The large pumps fit 1 gallon, 1/2 gallon and Raka 1 quart containers. For System3 quart and pint bottles, use the small pump. There are...

A lot of builders use syringes to get epoxy in small amounts accurately into specific places. The problem is that unless you clean the syringe out, you have to dispose of it. These pipettes do the same job at a tenth the cost.Feedback:I love your...

These fillet sticks are accurately cut from 4mm Okoume plywood to making perfect fillets. They range from 1-1/8" to 1/4" radius. Makes a great gift for a boat building buddy that has everything. For a PDF file containing instructions by Russell...