Viadana Double Ball Bearing Block w/Becket 38mm

These ball bearing blocks handling lines up to3/8 IN., and are very compact. Used on smallboats, cruisers and keel boats for vang, spinnakerand control line applications. Delrin® cheeks,sheave and ball bearings. Stainless steel (AISI316) load straps...

Viadana Double Ball Bearing Block 38mm

These ball bearing blocks handling lines up to3/8 IN., and are very compact. Used on smallboats, cruisers and keel boats for vang, spinnakerand control line applications. Delrin® cheeks,sheave and ball bearings. Stainless steel (AISI316) load...

Viadana Single Ball Bearing Block w/Becket w/Swivel 38mm

These ball bearing blocks handling lines up to3/8 IN., and are very compact. Used on smallboats, cruisers and keel boats for vang, spinnakerand control line applications. Delrin® cheeks,sheave and ball bearings. Stainless steel (AISI316) load straps...

Viadana Single Ball Bearing Block 38mm w/Swivel

These ball bearing blocks handling lines up to3/8 IN., and are very compact. Used on smallboats, cruisers and keel boats for vang, spinnakerand control line applications. Delrin® cheeks,sheave and ball bearings. Stainless steel (AISI316) load straps...

Viadana Single Ball Bearing Block w/Becket 38mm

These ball bearing blocks handling lines up to3/8 IN., and are very compact. Used on smallboats, cruisers and keel boats for vang, spinnakerand control line applications. Delrin® cheeks,sheave and ball bearings. Stainless steel (AISI316) load straps...

Viadana Single Ball Bearing Block 38mm

These ball bearing blocks handling lines up to3/8 IN., and are very compact. Used on smallboats, cruisers and keel boats for vang, spinnakerand control line applications. Delrin® cheeks,sheave and ball bearings. Stainless steel (AISI316) load straps...

Cast Jam Cleat

A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for...

5/16" Viadana Linked Ball Bearing Block

A traveler block is used to run a sheet through a block that itself runs on a rope horse.   Since 1961, Viadana has produced and supplied sailing outfits, while offering a long history of experience in research, design, manufacturing, and marketing...

Viadana Stainless Steel Shroud Adjuster 120mm

Comes with manufacturer two-year warranty Length - 120mm / 4 11/16" Thickness - 2mm / 5/64" Pin Size - 6mm / 1/4"

Ronstan Line Hanger

Lightweight hook used with light lines and elastic shock cord in a variety of applications. Great located on bulkheads. They provide a quick and economical means of securing lines, sails and other gear. Recommended: short length of 3/16" shock cord here...

Ronstan Single Hook Block

FEATURES Low friction High static and dynamic load capacity Lightweight Low profile swivelling hook for quick and easy attachment Hook suits rope, stainless steel and webbing fixing points Sheave Ø 3/4 in. Max. Rope Ø 1/4 in. M...

Viadana Stamped Dee (D) Clevis Pin Shackle 6m

Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at...

Viadana Inox JamCleat

Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32"

Racelite Formed Tangs (Hounds)

Two of these stainless formed tangs constitutes a hound. The ones in the photo above are held together by a twist tie to show how they would be aligned in practice. Part No. Mast Size Strap Hole...

Curved Base Pad Eye

This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel

Viadana Stainless Steel Swivel Base

Stainless Bow Fitting

Built from .090" stainless steel for extra strength. Base 3-1/2" long by 2-1/4" wide teardrop shape. Takes four #10 screws. Fin has two 1/4" holes and one 1/2" hole for jib tack.

Seadog Stainless Pad Eyes

Stamped pad eyes - strong and economical. Made from 304 stainless steel. Part # A B C D E SD-081101 7/16" 7/16" 1-1/8" .060" 5/32" SD-081102 1/2" 9/16" 1-3/8" .080" 3/16" SD-081103 3/4" 3/4" 1-3/4" ...

Clamcleat Line-Lok™ Cleats

Easy to tension, easy to release even when wearing thick gloves. Grips the line to resist being shaken loose-even in extreme conditions. Two sizes hold a wide variety of ropes - from 0 to 5mm (0" to 3/16"). Patented toothform holds high loads without...

Nylon Open Clamcleats

A deceptively simple ridged `V' groove holds ropes firmly, yet is devoid of any moving parts to break or seize. It allows the immediate release of the rope by a short upward and backward pull. Always tension the rope before it enters the cleat...

Weekender Vertical Gudgeon

These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They are designed to be mounted vertically in cases where the boat is a double-ender or where a...

Removable Outboard Motor Bracket

PLEASE NOTE, WE CURRENTLY ONLY HAVE THE ZERO DEGREE MOTOR BRACKET 2/24/2023 Dimensions: The plate is 1/8" thick stainless steel - 6" x 7-1/2". The mounting legs are from 1/2" dia SS rod. The bracket sits an average of 6-1/2" from the transom (not...

Rudder Hardware for Scamp

This set is recommended by John Welsford for Scamp. The tangs are 2-1/8 inches wide and the pintles have a sturdy 3/8" pin.This set consists of two gudgeons and two pintles. There is no hold down included. All parts are stainless steel. (note: pintle...

Racelite Curved Fixed Goosenecks

Racelite Fixed Goosenecks

RL-328 - Fixed Gooseneck - Screws or rivets to standard boom and mast. Base is 1.5" x 3".Shown here with tangs

Seadog Brass Cleats

Brass tie-down cleats are polished castings and very handsome. For the 3" and 4" cleats you have the option of ordering brass wood screws for mounting on drawers or cabinets. These are not recommended for use mounting these cleats on a boat. We...

1/4 Viadana Single Ball Bearing Block

Comes with manufacturer two-year warranty Sheave size - 22mm / 7/8" Max line size - 6mm / 1/4" Overall Height - 43mm / 1 3/4" Weight - 17 grams / .60 ounces Breaking Load - 700 kg / 1,543 lbs Max. Working Load - 100 kg / 220 lbs

Round Brass Thimbles

Round Brass Thimbles are handy for making authentic rope stropped blocks and many other uses. Scroll down for some examples. CH-FTHE - CH-FTHD - CH-FTHC - CH-FTHB - CH-FTHA Part # OD ID For Rope...

Nylon Clamcleats with fairleads

Injection molded nylon A deceptively simple ridged `V' groove holds ropes firmly, yet is devoid of any moving parts to break or seize. It allows the immediate release of the rope by a short upward and backward pull. Always tension the rope before it...

Racelite Stainless Shroud Adjusters

Stainless steel - two sizes For coarse adjustment of wire shrouds or stays. Each complete with two 1/4" dia pins and retainer rings. Dimensions: Part Length Width Hole dia. Strap thickness RL-245S 5-1/2" 5/8" 0.264" 0...

Tiller Lock Kit

This Tiller Lock Kit is a patent pending rudder locking device with unlimited variability designed for all tiller controlled boats. The locking of the tiller is effected by a short pull upward which causes the control line to be firmly locked around the...

Racelite 1/2" Pin Heavy Duty Pintles

1/2" pins - 1" & 2" rudders These pintles come in two widths and with either short pin or long pin. There is no gudgeon included. All parts are stainless steel - Fits 1" or 2" thick rudder. (note: pintle tangs can be easily adjusted for rudders as...

Seadog Stainless Long D-Shackles

Note: size = pin diameter Forged 316 Stainless Part No. A B C BreakingStrength SD-147173 5/32" 5/16" 1-5/16" 1,540 lb. SD-147174 3/16" 7/16" 1-9/16" 2,200 lb. SD-147176 1/4" 1/2" 1-7/8" 3,300 lb.  

Racelite Heavy Duty Rudder Gudgeons

See our pintle & gudgeon compatibility chart Our RL-690 rudder gudgeons are similar to our RL-490 pintles but with no pin. They can be used with the RL-690 transom pintle or with the RL-490 gudgeon if a bolt or rod is run through...

Ronstan 9/16" Narrow Saddle

316 Stainless Reference Imperial Metric A 9/16 in. 14 mm B 3/16 in. 4.8 mm C 1 7/16 in. 36.5 mm D 3/16 in. 5.0 mm Weight 0.2 oz...

Racelite Stainless Jam Cleat

Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Narrow 5/8" base. 3-1/4" long. Takes #10 screws.

Viadana 9/16 Camcleat with Swivel base and fairlead

Comes with manufacturer two-year warranty Material - Aluminum/Stainless Steel Min line size - 6mm / 1/4" Max line size - 14mm / 9/16" Hole Spacing - 32mm / 1 5/16" Hole Diameter - 5mm / 3/16" Max Working Load - 140 kg / 242...

1/4" (6mm) Ronstan Single, loop head Utility Block

316 Stainless steel cheeks and U.V. stabilised Acetal sheaves ensure a long service life with virtually no maintenance. Hollow rivets in the block heads can be fitted with shackles, which can also be used to add a becket for extra purchase...

Seadog Stainless Eyebolts

Machined 304 Stainless Used for bow eyes or anywhere a secure attachment point is needed. Metric threads. Part No. A B C D ThreadLength SD-080708 8mm(5/16") 109mm(4-5/16") 17mm(11/16") 76mm(3") 79mm(2-3/4") SD-080710 10mm...

Racelite Deck Plate

This stainless steel deck plate can be used with our RL-349 shroud adjuster or RL-305-A or RL-205 blocks. It comes complete with clevis pin and ring. wt 1/2 oz.

Small Bronze Sheaves

Sand cast bronze Articles about making your own blocks: Derek Waters Nigel McCarter Tidmarsh Major If you have read some of the articles in Duckworks (see links below) about making your own Blocks, and want to try it, but are uncertain about making the...

Forestay Tensioning Lever

Mast-raising and rigging goes much easier if you can attach the forestay quickly and easily. These quick-release, adjustable forestay levers from C.Sherman Johnson are the perfect solution for many trailerable sailboats up to around 26-feet. These are...

Ronstan Ropeglide Rings

Various sizes Text: Ronstan Ropeglide Rings. Reduce weight and complexity with ultralight, low-frticiton rings that can be used for deflecting lead lines or for barber haulers, lazy jacks, or as a replacement for blocks on vangs, etc. Simple and reliable...

Seadog Aluminum Cleats

Cast Aluminum Aluminum tie-down cleats have a smoother finish than the iron, and are lighter if weight is a consideration Available in 4", 5", & 6" sizes  

Potter 15 End Boom Sheeting System

This simple but effective system allows the Potter 15 to be sheeted entirely from the end of the boom, keeping the cockpit clear and the sheet right at hand. Package includes performance Ronstan blocks (one for boom and one for the traveler), and a...

B&B Aluminum Sailtrack

Extruded, anodised, aluminum B&B Custom Sailtrack Duckworks is pleased to offer a new custom sailtrack suitable for all sailboats small and large. This track has been designed by B&B and produced in the USA. Their goal with this track was to...

Racelite Stainless Mast Hounds

RL-425-H - RL-325-H Hounds are what you bolt to a mast to attach a wire stay to. These Race-Lite hounds are the ones made for various boat manufacturers. They are strong and solid. Part No. Mast Size Strap Hole...

Ronstan Small Fairlead V-Cleat

V-Cleats are a simple solution to cleating lines under moderate loads.Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system.Features:Lightweight and corrosion proofGreater abrasion resistance than traditional plastic...

Seadog Zig Zag Cleat

Simply weave rope around cleat arms, no knots needed. Great for fender lines, trailer covers and utility lines. Fits line up to 3/8".Part#ABCDFastenerSD-0435403-1/2"15/16"1-15/16"1-3/4"1/4FH

Andersen Mini Bailer

The ANDERSEN automatic bailers are available World Wide and recogized by dinghy sailors as the most effective and reliable means of automatic bailing. ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service...