Supplies

Silvertip Epoxy Hardener

Bottles hardener click HERE for resin Silvertip Epoxy is a premium laminating resin from System 3. Not only is it designed to have all the best characteristics for boat building, but it has the best pot life to cure time ratio of any epoxy I have ever...

RAKA Resin & Hardener Kits

RAKA is a good, economical boat building epoxy. It resists blushing and cures clear. Use it for laminating as is or with additives to make gluing, fairing and filleting mixes.Note: This epoxy is not UV resistant - it requires either paint or varnish for...

SilverTip Resin & Hardener Kits

Sets of resin and hardener in proper ratios Silvertip Epoxy is a premium laminating resin from System 3. Not only is it designed to have all the best characteristics for boat building, but it has the best pot life to cure time ratio of any epoxy I have...

SilverTip Epoxy Resin

Individual bottles of resin - click HERE for hardener Silvertip Epoxy is a premium laminating resin from System 3. Not only is it designed to have all the best characteristics for boat building, but it has the best pot life to cure time ratio of any...

3M Scotchbrite Pad (Pack of 6)

This product has long been the worldwide standard for general purpose surface conditioning by hand. This is the go to tool for removal of amine blush. Also perfect for a final prep of paint and varnish between coats. This will hit all the low spots that...

6 oz. x 60" Fiberglass Cloth

Used for covering any wood which needs extra protection. Fir or Pine plywood will check badly unless covered by glass and epoxy resin. Many builders prefer to cut this wide cloth into strips for stitch and glue construction. It does lie flatter, and if...

7" Rollers and Trays

7" Roller Covers: 1/8" yellow polyurethane foam. Perfectly suited for epoxy work, paints and varnish. An economical way to achieve good results with no lint and minimum stipple. A standard for the boat industry.• Best for smooth surfaces•...

3" Rollers and Trays

3" Roller Covers: 1/8" yellow polyurethane foam. Perfectly suited for epoxy work, paints and varnish. An economical way to achieve good results with no lint and minimum stipple. A standard for the boat industry.• Best for smooth surfaces•...

803 Glue Brushes (1 Dozen)

Sometimes called "Acid Brushes", these brushes are useful in a wide variety of small bonding and coating applications. Disposable Metal Handle

Spreader - 3" x 5" (Bundle of 6)

3" x 5" Dark Yellow Sold in bundle of 6 Description Dynatron Yellow Spreader are handy for for flow coating, fairing and filling applications.• Durable plastic tool handles the rigors of the shop• Spreader allows for precise application of...

Respirator Kit with Cartridges

3M 6000 Series Half Facepiece Respirator Kit with Cartridges Includes P95 Rated Filters With a pair of 6001 Organic Vapor Cartridges With Filters and Retainer Caps This is a NIOSH approved half facepiece respirator which is adaptable to a wide range of...

6 oz. x 38" Fiberglass Cloth

Used for covering any wood which needs extra protection. Fir or Pine plywood will check badly unless covered by glass and epoxy resin. Many builders prefer to cut this wide cloth into strips for stitch and glue construction. It does lie flatter, and if...

8ft Nuthatch Epoxy Kit

Our custom Epoxy kit for Warren Messer's 8ft Nuthatch contains:   1/2 gal.   Silvertip epoxy resin   1 qt.   Silvertip hardener   50 yds.   6 oz., 3" tape   1.5 pint   QuickFair   2.5 qt.  ...

RowCruiser Epoxy & Cloth Package

Most of the major supplies necessary for the construction of your Angus Rowcruiser (rowing version). Package includes 5.25 gallon epoxy kit, 3 pounds of wood flour, 20 yards of 6 oz fiberglass cloth, and one roll of 6 oz x 3” glass tape. 

Portage Pram Epoxy Package

EPOXY AND GLASS KIT1.5 gal kit of RAKA Epoxy1 pair of Epoxy Pumps4 yards 4 oz Fiberglass cloth1 lb wood flour200 4-inch zip ties

Powder Free BLACK Nitrile Gloves

Features and Benefits: 20% thicker than standard common blue nitrile gloves Textured for better grip, wet or dry Powder free, won't intefere with finishes or adhesives Size XL, 100 gloves per box, 10 boxes per case GlovePlus Powder Free, Textured Black...

System 3 Marine Spar Varnish

System Three Marine Spar Varnish is a high-build coating designed for marine epoxy and exterior wood surfaces such as railings, doors or any surface where a clear, durable gloss finish is desired. System Three Marine Spar Varnish contains...

Silvertip Gelmagic Tubes

A premixed thixotropic glue - Tubs available HERE GelMagic is a toughened, non-sagging, two component, structural epoxy adhesive designed for superior bonding to wood and most porous materials. Measuring is easily accomplished by either volume or...

Raka Hardener

For Resin, click HERE Particulars: All Raka Epoxies are 100 % solids with no evaporating solvents and have low viscosity for superb penetration and wetting out of wood and fiberglass. The Raka basic marine epoxy resin 127 is our standard resin with a low...

Buckle sets for 1" Nylon Webbing

By popular request we are finally offering one inch nylon webbing and buckles. Since these are sturdy and not really affected by water, they are very useful for many applications on a boat. Some ideas: Keeping hatches closed Holding heavy gear in...

Driver Bits

Often the screws that we use for boat building must be driven with special driver bits. We believe these are the most commonly used ones.

Rolls of 6 oz. Woven Fiberglass Tape

This is the stuff that is used for stitch and glue construction or for other reinforcement needs. Soak it with epoxy resin for plywood joints or to protect wood from abrasion and to add strength to joints.

12-Ounce Mixing Cups

Recommended for mixing epoxy On page 5 of Russell Brown's e-Book "Epoxy Basics", he states: You will be mixing many batches of epoxy. It helps in many ways if you get the right cups and sticks, and learn how to do this part well. We think of epoxy as...

Shur-Line Foam Mini Roller

For Paint or epoxy application Shur-Line Foam Mini Roller. These are the rollers many of our professional builders swear by for roll-and-tip painting of their boats. Quick Pro, sturdy 4-inch foam roller cover, 12 inch threaded handle, high density...

SilverTip QuikFair

QuikFair is a lightweight, microballoon-filled, fast-curing two-part epoxy fairing putty with excellent moisture resistance. The two color-coded parts have a non-sagging, butter-like consistency and are easily mixed to form a third color. At 77ºF...

Phenolic Microballoons

These hollow, purple-brown phenolic spheres make a low-cost low-density filler. They make a light-weight fairing compound with good compressive strength. Blend with Silica Thickner to prevent sagging. See this excellent primer by Christine Merchant

Deluxe Goat Island Skiff Epoxy Kit

The Goat Island Skiff epoxy kit contains the following: 1-1/2 Gallon System3 Silvertip epoxy kit (choose speed above) 1 lb. wood flour 8 oz. silica thickener 3 yards of 6 oz. x 50" fiberglass cloth for foils 1 roll of 2" wide fiberglass tape If...

System 3 Pennant Primer

Pennant Primer is a waterborne, two-part epoxy coating specifically formulated as a tough, below-the-waterline primer for marine topcoats. Though Pennant Primer was specifically designed for use with System Three Pennant Topside Paint, it is...

8.8 oz. x 38" Rutan Fiberglass Twill-Style Cloth

There is a 10% discount for orders of 10 yards and up. There is a $10 charge to ship fiberglass orders under 10 yards on a roll. To have your cloth shipped this way, click HERE. Orders of a single size and weight cloth that are 10 yards...

Stainless Steel Round Rod

Stainless steel rods for all kinds of jobs around the boat or shop.

Oarsman Marine Tallow

This is Oarsman's flagship product. They are the only US producer of traditional marine tallow and have been making it for 37 years. Tallow is a superior treatment and preservative for oar leathers, gaff jaw leathers and the like--essentially any full...

Joe's Leather Bailer

These traditional style bailers are made up with:cherry backplateslatheturned white oak or black locust handles (depends on the offcuts in the shop at the time)vegetable tanned shoulder leather for the"scoop,"copper slate nailsinstructionsand a tin of...

200 - 4" Nylon Cable Ties

There are a lot of different ways to hold boats together for the stitch and glue process. Sometimes you even want to use more than one as some are easier to adjust while others are stronger. So in addition to standard copper wire, we now are offering...

Wood Flour

for making structural fillets Wood flour is very fine, filtered, sawdust-like wood by-product. It is an excellent all around filler for creating glues and structural fillets. Use in sewn-seam and stitch and glue construction. Wood flour combines with...

Graphite Powder

Renn Tolman and others recommend you mix Graphite Powder with epoxy resin to make a kind of paint for bottom coating boats. It is said to aid abrasion resistance and to inhibit marine growth. The latter is in some dispute but there is no doubt about the...

"Jack Tar" Spar Leather Kits

Protect your spars These spar kits were inspired by the Oar Leather Kits that we get from Rodger Swanson at Swanson Boat Company. The leather in each kit is 5-6 oz. top grain, vegetable tanned cow hide. Marine tallow is included as the...

Silica Thickener

high strength thickening agent for epoxy The most popular thickening agent for epoxy, silica makes a smooth, non-sagging, high-strength mixture for structural bonding, filleting and filling. Mix both epoxy resin and hardener then add silica until the...

RAKA Epoxy Pigment

Our Raka pigments are powders machine mixed in epoxy resin side A. The pigments cure hard in the epoxy and don't add a liquid plasticizer like many other general purpose pigments. You can mix to get your own color or add some white or black to lighten or...

N95 Dust Masks

Features inner foam for a custom seal, while a dual head strap provides optimum fit. Effective against particulate aerosols free of oil. Helps provide comfortable, reliable worker protection against certain non-oil based particles in work applications...

Carbon Fiber Cloth

Note: There is a $10 charge to ship fiberglass and carbon fiber orders under 10 yards on a roll. To have your cloth shipped this way, click >HERE. Orders of a single size and weight cloth that are 10 yards or more will be automatically...

Peel Ply

Available 50" or 10" wide - by the yard or 100 yard roll.   There is a $10 charge to ship fiberglass orders under 10 yards on a roll. To have your cloth shipped this way, click HERE. Orders of a single size and weight cloth that...

Mayfly14 Epoxy Kit

We offer two kit options for Mayfly14: 1) Basic Epoxy Kit - 1 gal. RAKA Resin 1/2 gal. Hardener 1 roll 6 oz. , 3" fiberglass tape 8 oz. silica thickener 1 lb. wood...

6 oz. x 50" Fiberglass Cloth

Used for covering any wood which needs extra protection. Fir or Pine plywood will check badly unless covered by glass and epoxy resin. Many builders prefer to cut this wide cloth into strips for stitch and glue construction. It does lie flatter, and if...

Non-Skid Deck Pad Material

Our EVA Deck Traction is ¼" thick with 1/10" deep milled grooves creating a long diamond pattern. Perfect for boat deck traction, SUP boards, cooler pads—anywhere you need a non-aggresive traction surface. EVA Foam Easy to cut to custom...

Poly Tubing

Poly tubing is sold by packaging companies - usually in 3000 foot rolls. It is typically used to package parts for storage or shipping. Turns out the stuff can be used to steam wood boat parts so that they will conform to curves. Consider the following...

Biaxial Fiberglass Tape

This is the stuff that is used for stitch and glue construction or for other reinforcement needs. Soak it with epoxy resin to reinforce plywood joints. Biaxial cloth has no selvages and will conform more readily to curves than regular tape. It is also...

Jonsboat Epoxy Kit

We offer two kit options for Jonsboat: 1) Basic Epoxy Kit - 1 gal. RAKA Resin 1/2 gal. Hardener 1 roll 6 oz. , 3" fiberglass tape 8 oz. silica thickener 1 lb. wood...

Notched Spreaders

Notched spreaders have several uses - for spreading adhesives evenly where large surfaces have to be joined. Also for fairing where you spread fairing compound with the notched spreader, sand the ridges down with a longboard then fill the gaps in and...

Quick Cure 5 by System Three

Five Minute epoxy system Quick Cure-5 is the standard quick setting "five minute epoxy" system. Mix at a 1:1 by volume ratio. Quick Cure is ideal for all small jobs requiring a strong bond and rapid cure. Quick Cure is highly water resistant but not...

SilverTip EZ-Fillet

Fillet mix in a tub EZ-Fillet is a wood flour-filled two-part putty specifically designed for stitch-and-glue wooden boat construction. Its ketchup-like, self-leveling consistency allows it to be measured by volume or weight. The resin (part A) is brick...