23 Yamato Plans

This is a modern plywood updated version of the Japanese Yamato fishing boats. The client in this case, worked in Japan and admired these boats - he was able to obtain the lines from one example and gave it to us so that we could draw up a simple...

22' 8" Ranworth Plans

The Ranworth is a typical Broads type sailing cruiser with generous beam and relatively large sail area to catch the wind above the reeds. She has 3 berths and space for a small galley and wc compartment. The cockpit is generous in size and could take a...

Transat 6.5 Plans

This is a multi-chine plywood entrant for the Mini-Transat race which takes competitors across the Atlantic to Antigua via the Canary Islands. It is known as one of yachting's most dangerous races and is fought by boats with a maximum length of 6.5m. We...

20' Port Louis Plans

This attractive pocket cruiser was designed for a client on the island of Mauritius and has some of the hull design features of the indigenous craft with their sweet and not over wide transoms married to traditional English work boat hull shapes with...

24' Beaumaris Plans

The Beaumaris 24 is one of several trailer sailers for strip planking that we have had on the drawing board recently. This particular example has accommodation which includes 3 or 4 berths, a galley and a Porta-Potti w.c., all combined with a good sized...

24' Fast Cruiser (GA & Lines only)

A simple multi chine yacht with accommodation for up to 4/5 in what is, a fairly open plan and basic accommodation. A more modern arrangement with separate heads could be fitted. To keep construction as simple as possible, ply/epoxy construction or...

Simplicity 20 Plans

Following along the same lines as her smaller sister, this cruiser is an ultra simple boat with plenty of space and performance for her size. She has room for 3 or 4 berths plus galley and portable wc. Construction simply involves fixing pre-shaped...

21' Rona Yawl Plans

This little ship has been designed for the sailing author Derek Harvey and incorporates many ideas gleaned from his years of sailing experience. The starting point for the design was the requirement for a trailable boat with comfortable internal...

24' Mayfly Sharpie Plans

A neat little ply sharpie of simple and cheap construction with 4 berths (and room in the cockpit for more) for exploring estuaries and gunkholing. With it's simple unstayed rig, it is ideal for the small family. Uses disposable sand or gravel ballast...

24' Tasman Junk Rigged Yacht Plans

The Tasman is a multi-chine plywood yacht designed for long distance sailing for 2 crew, which uses an egg-box frame system of plywood fore and aft girders slotted together with plywood bulkheads - once stringers have been fitted, the ply hull panels are...

23' Martlet Pilot Cutter Plans

The 30' LOD Martlet has been a popular design and represents a lot of seaworthy boat for her length but I have often been asked about a smaller version - a design which embodies the robust pilot cutter looks and sea keeping qualities and the ability to...

Skye 21' Plans

Here is a smart little yacht combining 2 modern building techniques to make construction as quick and simple as possible. First of all, the pre-shaped ply bottom panel and longitudinal girders are put together with frames and bulkheads. To make things...

Pioneer 21' Dory/Sharpie Plans

In this design a client asked for the largest and safest single handed offshore yacht that he could get on a very limited budget. For your money. a dory or sharpie gives you more length per £100 than any other shape. Add to this type of hull a...

22' Kittiwake Canoe Yawl Plans

I think that the canoe yawls of the early part of this century were some of the most beautiful cruising yachts ever designed. They may not have had as much room inside as their modern counterparts, but they were sea kindly craft with an easily...

Ailsa 22 Plans

The Ailsa 22' is a lightweight trailer sailer which uses plywood/epoxy construction for most of the hull and deck and modern strip planking for the round bilge area. Pre-fabricated plywood sections are used for the basic hull structure allowing a lot of...