Aluminum Vertical 4-Switch Panel MSRP: Now: $34.99 Add to Cart Cast Jam Cleat MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel MSRP: Now: $48.50 Add to Cart Track Fittings MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring MSRP: Now: $5.00 Add to Cart TRIANGLE RING MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket MSRP: Now: $79.95 Add to Cart Oblong Eye Plate MSRP: Now: $3.95 Add to Cart Bow Eye MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges MSRP: Now: $1.99 Add to Cart Bimini Top Inserts MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Heavy Duty Bail MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel MSRP: Now: $48.50 Add to Cart Track Fittings MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring MSRP: Now: $5.00 Add to Cart TRIANGLE RING MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket MSRP: Now: $79.95 Add to Cart Oblong Eye Plate MSRP: Now: $3.95 Add to Cart Bow Eye MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges MSRP: Now: $1.99 Add to Cart Bimini Top Inserts MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Aluminum Breaker Panel MSRP: Now: $48.50 Add to Cart Track Fittings MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring MSRP: Now: $5.00 Add to Cart TRIANGLE RING MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket MSRP: Now: $79.95 Add to Cart Oblong Eye Plate MSRP: Now: $3.95 Add to Cart Bow Eye MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges MSRP: Now: $1.99 Add to Cart Bimini Top Inserts MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Track Fittings MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring MSRP: Now: $5.00 Add to Cart TRIANGLE RING MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket MSRP: Now: $79.95 Add to Cart Oblong Eye Plate MSRP: Now: $3.95 Add to Cart Bow Eye MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges MSRP: Now: $1.99 Add to Cart Bimini Top Inserts MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Round Stainless Base Fittings MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring MSRP: Now: $5.00 Add to Cart TRIANGLE RING MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket MSRP: Now: $79.95 Add to Cart Oblong Eye Plate MSRP: Now: $3.95 Add to Cart Bow Eye MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges MSRP: Now: $1.99 Add to Cart Bimini Top Inserts MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Sea Dog Stainless Steel Swivel Eye Plate with Ring MSRP: Now: $5.00 Add to Cart TRIANGLE RING MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket MSRP: Now: $79.95 Add to Cart Oblong Eye Plate MSRP: Now: $3.95 Add to Cart Bow Eye MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges MSRP: Now: $1.99 Add to Cart Bimini Top Inserts MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
TRIANGLE RING MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket MSRP: Now: $79.95 Add to Cart Oblong Eye Plate MSRP: Now: $3.95 Add to Cart Bow Eye MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges MSRP: Now: $1.99 Add to Cart Bimini Top Inserts MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket MSRP: Now: $79.95 Add to Cart Oblong Eye Plate MSRP: Now: $3.95 Add to Cart Bow Eye MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges MSRP: Now: $1.99 Add to Cart Bimini Top Inserts MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Captive Pin Bow Shackle MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket MSRP: Now: $79.95 Add to Cart Oblong Eye Plate MSRP: Now: $3.95 Add to Cart Bow Eye MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges MSRP: Now: $1.99 Add to Cart Bimini Top Inserts MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
SeaLect Triple Latch Hatch MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket MSRP: Now: $79.95 Add to Cart Oblong Eye Plate MSRP: Now: $3.95 Add to Cart Bow Eye MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges MSRP: Now: $1.99 Add to Cart Bimini Top Inserts MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Toggle Switch Panel with USB Power Socket MSRP: Now: $79.95 Add to Cart Oblong Eye Plate MSRP: Now: $3.95 Add to Cart Bow Eye MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges MSRP: Now: $1.99 Add to Cart Bimini Top Inserts MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Oblong Eye Plate MSRP: Now: $3.95 Add to Cart Bow Eye MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges MSRP: Now: $1.99 Add to Cart Bimini Top Inserts MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Deck Mount Bow Socket MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges MSRP: Now: $1.99 Add to Cart Bimini Top Inserts MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Phenolic Through-Deck Fairleads MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges MSRP: Now: $1.99 Add to Cart Bimini Top Inserts MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Viadana Stamped Dee (D) Clevis Pin Shackle 6m MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges MSRP: Now: $1.99 Add to Cart Bimini Top Inserts MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Viadana Inox JamCleat MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges MSRP: Now: $1.99 Add to Cart Bimini Top Inserts MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Curved Base Pad Eye MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges MSRP: Now: $1.99 Add to Cart Bimini Top Inserts MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Seadog Nylon Step Handle MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges MSRP: Now: $1.99 Add to Cart Bimini Top Inserts MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Seadog Fender Hook MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges MSRP: Now: $1.99 Add to Cart Bimini Top Inserts MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Seadog Stainless T-Handle Drain Plug MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges MSRP: Now: $1.99 Add to Cart Bimini Top Inserts MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Small Top Mount Bimini Deck Hinges MSRP: Now: $1.99 Add to Cart Bimini Top Inserts MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
2-3/4" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
2" Cast Brass Take Apart Butt Hinges MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Stainless Short Side Door Hinge MSRP: Now: $4.36 Add to Cart Seadog Stainless Pad Eyes MSRP: Was: Now: $1.99 - $3.99 Choose Options Clamcleat Line-Lokâ„¢ Cleats MSRP: Was: Now: $0.62 - $5.98 Choose Options Nylon Open Clamcleats MSRP: Was: Now: $3.56 - $12.53 Choose Options Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Removable Outboard Motor Bracket MSRP: Now: $99.00 Choose Options Seadog Brass Cleats MSRP: Was: Now: $12.99 - $18.99 Choose Options DPI Flush Series Access Doors - Polar White MSRP: Was: Now: $39.70 - $104.63 Choose Options Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Round Brass Thimbles MSRP: Now: $2.25 Choose Options Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Seadog 4" LED All Around Light MSRP: Now: $39.99 Add to Cart Factory Potter Bow and Stern Lights MSRP: Was: Now: $66.99 - $72.99 Choose Options Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Stainless Steel Bimini Top Slide with Bolt MSRP: Now: $7.66 Add to Cart Seadog Stainless Long D-Shackles MSRP: Was: Now: $4.75 - $6.75 Choose Options Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Stainless Side Mount Deck Hinges MSRP: Now: $7.25 Add to Cart Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Navilight Tricolor 2NM w/Navimount base MSRP: Now: $59.70 Add to Cart Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Seadog Stainless Straight Chock MSRP: Now: $12.09 Add to Cart Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Factory Potter Masthead Light Bracket MSRP: Now: $21.95 Add to Cart Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Ronstan 9/16" Narrow Saddle MSRP: Now: $3.08 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Viadana 9/16 Camcleat with Swivel base and fairlead MSRP: Now: $63.99 Add to Cart Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Viadana 316 Stainless Steel Carbine Hook 50mm/2" MSRP: Now: $5.50 Add to Cart Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Aluminum Vertical 4-Switch Panel Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific... MSRP: Now: $34.99 Add to Cart Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Cast Jam Cleat A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for... MSRP: Was: Now: $16.99 - $19.99 Choose Options
Heavy Duty Bail Heavy Duty Stainless Steel Bail. 3/8" bail and bolt, 2-1/8" inside width, 2-1/4" from edge of bolt to inside of U MSRP: Now: $55.00 Add to Cart Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Aluminum Breaker Panel Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to... MSRP: Now: $48.50 Add to Cart Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Track Fittings Track Fittings can be used to add slide track to your boat. Track Slides convert standard hinge fittings for track use. End Caps establish the termination point of a Bimini slide assembly. Constructed of UV resistant injection molded nylon. MSRP: Now: $3.50 Choose Options Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Jaw Slide & Bracket Fittings These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide then glides along the bracket and is adjusted and secured... MSRP: Was: Now: $1.75 - $4.50 Choose Options
Round Stainless Base Fittings Part # Description Tube O.D.* Base Fastener SD-280300 30° Round Base 7/8" 2-5/8" #10 FH These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen... MSRP: Now: $10.50 Add to Cart Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Sea Dog Stainless Steel Swivel Eye Plate with Ring Stainless Steel Swivel Eye Plate With Ring by Sea Dog Model No. 089511 304 S.S. - A part of the Sea Dog line of heavy duty stainless steel marine grade hardware, so these Swivel Eye Plate With Rings are built to last. Product Features: A ring is added to... MSRP: Now: $5.00 Add to Cart TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
TRIANGLE RING Formed 304 Stainless Steel MSRP: Now: $4.00 Choose Options LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
LOCKING ASYMMETRICAL SNAP HOOK WITH EYE INSERT These Locking Asymmetric Snap Hooks with Eye Inserts are designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater... MSRP: Now: $8.00 Choose Options Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Captive Pin Bow Shackle With their rounded shape, Bow Shackles are designed to handle many different types of load from any direction. Features a captive pin which completely clears the opening of the shackle when open, recessed in a secured, flush position. The pin remains... MSRP: Now: $6.00 Choose Options SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
SeaLect Triple Latch Hatch The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit up proud of frame (not a recessed groove like many... MSRP: Now: $74.95 Add to Cart Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Quarter-turn Deck Plate w/internal collar The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline... MSRP: Was: Now: $11.41 - $14.25 Choose Options
Toggle Switch Panel with USB Power Socket The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of... MSRP: Now: $79.95 Add to Cart Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Oblong Eye Plate These Oblong Eye Plates are ideal for rigging and tie down applications. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two FH fasteners (not included). A B C D E Fastener Weight 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12... MSRP: Now: $3.95 Add to Cart Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Bow Eye These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp... MSRP: Was: Now: $10.99 - $12.99 Choose Options
Deck Mount Bow Socket These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover or cockpit tents. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed... MSRP: Now: $1.90 Add to Cart Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Phenolic Through-Deck Fairleads Any line that goes through a deck needs something like this to protect both the deck and the line. Bakelite (phenolic). All pieces have approx 1/8" flange overhang and 5/8" overall height. Part # Thru Hole(min) Hole Size(for... MSRP: Now: $2.99 Add to Cart Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Viadana Stamped Dee (D) Clevis Pin Shackle 6m Comes with manufacturer two-year warranty Pin size - 6mm / 1/4" Inside Width - 16mm / 5/8" Inside Height 21mm / 13/16" Breaking Load - 2,050 kg / 4,519 lbs -------------------------------------------- Compare to the top-selling brands in North America at... MSRP: Now: $3.99 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.49 Add to Cart Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Curved Base Pad Eye This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel MSRP: Now: $12.50 Add to Cart Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Seadog Nylon Step Handle Being able to reboard a boat if you fall out or turn it over can be crucial to your survival. You may thank yourself one day for having had the foresight to install one of these step/handles in just the right place. 6-1/2" long overall These step handles... MSRP: Now: $5.50 Add to Cart Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Viadana Stamped D Clevis Pin Shackle 27.12 Details: Pin size - 4mm / 5/32" Inside Width - 10mm / 3/8" Inside Height 15mm / 9/16" Breaking Load - 700 kg / 1,543 lbs 27.14 Details Pin size - 5mm / 3/16" Inside Width - 12mm / 1/2" Inside Height 17mm / 11/16" Breaking Load - 1,050 kg /... MSRP: Was: Now: $2.00 - $3.00 Choose Options
Seadog Fender Hook Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH... MSRP: Now: $3.99 Add to Cart Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Seadog Stainless T-Handle Drain Plug These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or... MSRP: Now: $4.46 Add to Cart Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Seadog Pop-Out Deck Plates - Black, White & Clear Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and... MSRP: Was: Now: $12.74 - $14.45 Choose Options
Small Top Mount Bimini Deck Hinges These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side... MSRP: Now: $1.99 Add to Cart Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options 2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Bimini Top Inserts These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel... MSRP: Was: Now: $0.68 - $0.85 Choose Options
2-3/4" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH MSRP: Now: $7.42 Choose Options 2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
2" Cast Brass Take Apart Butt Hinges Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH MSRP: Now: $7.20 Choose Options Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.
Stainless Short Side Door Hinge A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.