Kari 24' Norwegian Faering

The Kari 24' is based on the Kari 2 which, itself, was based on the lines taken off the original Kari Faering. In the case of this new 24' design the client wanted a rounder hull with slightly harder bilges and so we modeled a 6 plank per side design...

17'3" Kon Bot Puck Plans

Not much has been written in the West about the traditional working craft of the East European countries but they had some fine craft and this is just one example of them. The KON was one of the smaller types of boat working on the Baltic around the Bay...

18'4" Jim Canoe Yawl

Since designing Lillie, we have had several enquiries for new canoe yawl designs. I think that this is partly due to their obvious elegance in shape and function. They are beautiful craft and represent a very personal form of sailing. The journeys of...

16' Iona Skiff Plans

For those who want to build a classically designed double ended clinker craft, this boat has been developed from the Shetland Skiff and North American Peapod dinghy. Construction is greatly simplified from the conventional clinker method and kept to a...

17'3" Gdansk Plans

he ‘‘Gdansk’’ is a modified version of the ‘‘Puck’’ Polish fishing boat design for a client who didn’t mind giving up the double ended hull. Her basic particulars are similar to the ‘‘Puck’’ design but she has a transom stern, a...

24' New Bedford Whaler Plans

The New Bedford Whalers were renowned for their ruggedness and sea-kindly manner. Typically they were 28' or 30' long. I was asked to draw up the lines for a shorter version for a film company and decided to use this design work as the basis of a full...

16' Islay Skiff Plans

The Islay is a recent development of our Iona design for a client who required a graceful boat with more beam and a little more sheer. He also wanted a traditional cutter rig with a jaunty looking bowsprit. Construction can either be by the strip...

21' Solway Whaler Plans

A lightweight rowing whaler for easy construction. The hull has 4 panels per side plus a narrow flat bottom panel and the hull is symetrical about amidships to make construction even easier.The hull can be made in 2 halves and bolted together in the...

19'6" Lark Dory

19’6’’x 5’8’’x 11’’ (min.). May be built in two halves and bolted together as a fishing/motor dory or as a sailing dory with or without the cubby/cabin. Pre-shaped side hull panels are fastened to the...

16' Casco Bay Canoe Yawl Plans

The Casco Bay 16 was designed for Maurice Byrne of the Boatyard Upstairs for a Swiss client who wanted a fast, easily handled canoe yawl for use on his home lakes. We have developed an efficient and stable hull form with slight influence from the Casco...

15' Medway Doble Plans

We were asked by a Portuguese client to stretch our standard Medway Doble to produce an easily rowed craft which could be carried under the bridge deck of a large cruising catamaran and used both as a tender and as a lifeboat. This version has the same...

Kari 2 Faering Plans

We were asked to develop the plank shapes for a replica of a 4 oared Faering from some lines that had been taken off the boat some while back. The client was the husband of the Great Granddaughter of the owner who had the original built in 1892 for the...

The Lillie Canoe Yawl Plans

The Lillie Canoe Yawl - this lovely craft was commissioned by Tom Dunderdale after reading the series of articles in the Classic Boat magazine on the 13' strip planked canoe yawl Ethel. The idea was to produce a canoe yawl of similar style to those of...