Small Sharpies & Dories

  • 10' Grand Banks Dory Plans

    10' Grand Banks Dory Plans

    A simple ply Grand Banks Dory for stitch and tape construction using just 3 sheets of 6mm plywood - she may have stowage/buoyancy compartments in the ends and could take an electric outboard motor. 10 Grand Banks Dory Particulars LOA 10' 3...

    $81.00
    Choose Options
  • 11'6" Eider Duck Punt Plans

    11'6" Eider Duck Punt Plans

    The Eider is a simple plywood duck punt suitable for river and canal rowing and some quiet fishing. We have given her a small transom stern to allow more stowage space and so that she could take a small petrol or electric outboard if required. She is...

    $47.00
    Choose Options
  • 12'10" Signet Dory Plans

    12'10" Signet Dory Plans

    A delightful little fun dory for single fishing and rowing. The plans show a simple unstayed sprit boom sailing rig with a hook on leeboard although she will also take a daggerboard. Can be built in 2 identical halves which fit inside each other for...

    $61.00
    Choose Options
  • 14' Exe Dory Plans

    14' Exe Dory Plans

    Looking for an enjoyable way to exercise, and a pleasurable few weekends working with your hands? If so, then the 14ft. EXE DORY will certainly meet your requirements. Very simple in construction, using the stitch and tape method to produce a strong and...

    $91.00
    Choose Options
  • 15' V Bottomed Ruddy Duck Punt Plans

    15' V Bottomed Ruddy Duck Punt Plans

    The Ruddy Duck has been based upon our simple flat bottomed Eider Duck Punt. We were asked to alter her for more serious rowing by a crew of 2 so we went for a double ended hull shape with a ‘V’ bottom and more rocker. The plans give details for...

    $81.00
    Choose Options
  • 15'9" Drift Boat Plans

    15'9" Drift Boat Plans

    Drift boats are usually used in tricky rivers with fast running currents and rocky passages for fly fishing. The oarsman sits aft, facing forward and uses the oars to manoeuvre the boat round rocks whilst the boat is carried down river by the current...

    $101.00
    Choose Options
  • 16' Cambridge Punt Plans

    16' Cambridge Punt Plans

    We were asked by the Ibis Boatworks to develop a traditional punt for lake use which would have a length that would come out of 2 sheets of plywood - so we used the 20’ Cambridge Punt (page DA13) as a basis - the result is a pretty punt with a length...

    $61.00
    Choose Options
  • 17'6" Kingfisher Garvie Plans

    17'6" Kingfisher Garvie Plans

    Following the traditional North American theme is this unusual craft. She is of simple 3/8’’ ply hard chine, flat bottom construction over stout pine frames, with a simple unstayed sprit rig. The original craft were used for fishing and cargo...

    $88.00
    Choose Options
  • 18' Exe Dory

    18' Exe Dory

    The 18' Exe Dory uses three sheets of 3/8’’ ply and two sheets of 1/2’’ ply in it’s construction. It is built on a simple framework which becomes an integral part of the boat’s structure. Beam is 4’5 1/2’’ across the gunwales and...

    $101.00
    Choose Options
  • 18'x33" Simple Estate Punt

    18'x33" Simple Estate Punt

    A simple ply over frame punt for general estate duties as well as river poling – not as shapely as our Cambridge punts but simple and efficient—the plans show aft storage but she could be fitted out in many different ways and could have a small...

    $41.00
    Choose Options
  • 20' Cambridge Punt

    20' Cambridge Punt

    I have often been asked whether we had a traditional Thames or Oxbridge type punt in our design catalogue - now and American client has asked us to draw up a 20' (6.01m) example for simple stitch and tape construction. She has a beam of 3'10" (1.17m)...

    $81.00
    Choose Options
  • 24' Cambridge Punt Plans

    24' Cambridge Punt Plans

    This design is an extended 20' Cambridge type punt but with proportionally more beam. Having said that, the beam can be easily altered by changing the width of the bottom plank/panel and frames. Two methods of construction are shown - ply plank over...

    $101.00
    Choose Options
  • Acorn 11'6" Garvie Plans

    Acorn 11'6" Garvie Plans

    Again following the North American theme of solid working craft that are sadly no longer with us we have in the Acorn a sweet little craft which, with modern materials and methods, is easily built. Originally designed for carrying small cargoes she has,...

    $61.00
    Choose Options
  • Docat Suppliment Plans

    Docat Suppliment Plans

    This is a suppliment - you also need Exe Dory plans to build this boat Based upon two EXE DORY hulls, this nippy little catarmaran makes the ideal beach boat and swimming platform for the family. Existing EXE DORIES can be converted...

    $34.00
    Choose Options
  • Drake 11' Sharpie Plans

    Drake 11' Sharpie Plans

    The DRAKE series of ply sharpies are based upon very simple construction methods. Pre-shaped side panels are bent round frames and transom. An external chine stringer is then added followed by the bottom panel. The plans show basic construction and rig...

    $61.00
    Choose Options
  • Drake 13' Sharpie Plans

    Drake 13' Sharpie Plans

    The DRAKE 13 fits snuggly between the 11 and 18 footers and offers a lighweight and roomy dinghy/dayboat for family sailing. She can be built with or without the centreboard and rig to offer a simple rowing boat that can be used as a utility tender for...

    $88.00
    Choose Options
  • Drake 18' Sharpie Plans

    Drake 18' Sharpie Plans

    A very simple 18’x 5’2’’ ply sharpie drawn with a simple unstayed sprit boom rig and a ply centreboard. Ideal for estuary cruising and an excellent ‘big’ boat for first time construction. In it’s basic form 10 sheets of 3/8’’ ply and 1...

    $88.00
    Choose Options