Kayaks

The Ocean Crossing Kayak is the first stage in an experimental project - some ocean going kayaks are quite large with volume to carry extensive stores and are made from exotic materials to keep weight down - some have 'castles' at bow and stern so that...

The Sealion was originally modelled on our Seafox sea kayak but the use of Cedar Strip planking for her construction allows a more graceful and curvaceous shape both for the hull and the deck. She is built over computer faired mould shapes set up on a...

This is a modern ‘sit-on’ type kayak where the cockpits are essentially open and sealed from the remainder of the kayak. The areas around the cockpits are used for both storage and buoyancy.Construction uses 3 or 4mm plywood throughout and the stitch...

Like her bigger sister, the 12’ 6” Esk is a development of our Dart design. She has the swept up bow and flared out forward sections to help her in choppy waters—and we have retained the knife edge to the rear sections to give her good...

The 17’ Esk is a development of our 2 other Esk designs. She has the same swept up bow and flared out the forward sections to help her in choppy waters and her additional length gives her more storage space and a good ride in choppy waters. She...

Set up just about any canoe as a sailing outrigger.

The sporty 14’ single kayak (now in it’s mark 2 version) has a beam of 24’’ and a ‘V’ bottomed soft chine shape giving plenty of stability with a very good tracking and low wetted surface area hull. Construction uses just 2 1/2 sheets of...

The DART 22 uses a similar section to that of the Dart 16. This consists of a tortured ply ‘U’ shape which changes fore and aft into a full ‘V’ giving adequate buoyancy and a good entry at the fore foot. Above the shaped bottom there is a soft...

The Dart 16 double kayak has a soft ‘U’ shaped bottom running into flared ‘V’ sections fore and aft with a chine, giving a very stable shape. She has a large 7’ long cockpit and with her 32’’ (0.81m) beam she is...

The 14’ 6” Esk is a development of our Dart design. We have swept the bow up and flared out the forward sections to help her in choppy waters—aft, we have given her a knife edge to the rear sections to give her good directional stability. She has...

The Cree 14 is essentially a strip planked version of the Esk 14. The mould shapes are given full-size and details are given for a simple building jig. 6mm thick Western red Cedar is used for the strip planking although other woods may be used.Normally...

The Greenland 19 has a simple V bottomed single chine stitch and tape plywood hull designed to ride out rough water with ease and to have a good turn of speed. She has an optional daggerboard box to help in directional stability. The deck is strip...