15' 3" Shelduck Duck Punt

 The Shelduck Duck Punt is a simple plywood punt suitable for river and canal rowing and some quiet fishing. Although she has the flat bottom of the Eider Duck punt, she is double ended like the Ruddy Duck punt.Construction is stitch and tape...

25' Sandolo

  The Sandolo is a traditional flat bottomed rowing boat used in Venice and the Venetian Lagoon and unlike the Gondola is, like most craft, symmetrical about it's centerline. In fact it is of a simple flat bottomed, single chine shape with...

24' Oarsome Coastal Rowing Skiff

Oarsome Chance came to me for the design of a 24' Coastal Rowing Skiff which could be more easily used as a multi-role boat and which was safer for use offshore. Instead of a double ended design, often used for this role, we went for a transomed design...

15' 6" Whitehall Skiff

This is the Selway Fisher version of the lovely Whitehall Skiff. The origins of the Whitehall Skiff (or pulling boat) are a little vague - some say that her design came from some of the small workboats around Whitehall in London but others trace her...

Thames 32' Clinker, Strip Planked or FRP Skiff Plans

The Thames 32 has primarliy been designed for Foam Re-inforced Plastic (FRP) construction - the plans give details of the male plug (so that a female mould tool can be made) which can also be built as a finished wood hull. The wood hull can be built...

Thames 19' Rowing Skiff Plans

The Thames 19 is a stretched version of our 17’ Thames Skiff and has the same sweet wineglass shaped transom. She has the same beam as the 12; and 17’ versions and can be fitted out either to have a single or double rowing position. Construction...

15' Hazel Guide Bateau Plans

Based upon the American Adironack guide boat, this craft combines traditional lapstrake (clinker) construction with modern materials. The bottom is a flat piece of 3/8’’ ply slightly rockered fore and aft and the five strakes are of...

15' Mandarin Rowing Skiff Plans

This design is a 15' version of the 17 footer - the beam is the same at 45" and she has a single traditional oarlock. She uses just 5 sheets of 4, 5 or 6mm plywood and the plans give details so that she can be made in 2 halves split at the centre seat...

Hartford 18' Plywood Skiff Plans

The Hartford 18' skiff was drawn up for the Great River Race and to take a crew of 4 - a cox, 2 oarsmen plus a passenger who could take a turn at rowing. She has 5 planks per side and is built using the stitch and tape method for the shortest...

17' Mandarin Rowing Skiff

The Mandarin 17 has a beam of 45” and is designed with traditional oarlocks to mirror the traditional Thames skiffs. She may be fitted with a single or double rowing position and the plans detail a rudder and traditional foot rests. She uses 5 to 6...

18' Windrush Rowing Skiff

This skiff has been drawn up for a client who specifically wanted to develop a design optimised for the “front rower” rowing system (www.frontrower.com) which allows the rower to face forward. For those who do not want to use this system we have...

14' Rod Fishing Coble Plans

Cobles take many different forms—this is a very different type to that found on the NE Coast of England which are used in the sea off exposed shorelines—this coble is of a type found on rivers and inlands waters and was used for rod fishing—mainly...

22' Virginian Skiff (Moulds/Jigs only)

We have the computer generated mould shapes and building jig details (only) for a 22'x7'2" (6.71x2.18m) Yankee Skiff for rowing or motor power. Could be strip planked or completed in clinker ply. These skiffs have a narrow flat bottom plank and a shapely...

15' Adirondack Guide Boat Plans

The Adirondack Guide boats were used in the outback of North America in the 19th and early 20th Centuries for hunting, portaging etc and have a very distinctive shape with fairly pinched bow/stern sections and slack bilge shape. Beam was kept low so...

10'9" Medway Skiff Plans

The Medway 11 is a rowing skiff development of our Medway Doble design. We have retained the same 3 plywood planks per side and the simple stitch and tape method of construction. She uses just 3 sheets of 5 or 6mmplywood. As drawn, she is fitted out for...

Millennium Falcon Plans PDF

Design #236 is a quad version of Dawn Treader, #246. They call it "The Great Catalina Island to Marina del Rey Rowing and Paddling Derby". That may not be the official title, but that is the popular name. It is staged annually around October first, by...

Oxford Strip Planked Sailing/Rowing Skiff Plans

A strip planked skiff for Mr. P. Hobbs with a simple lug rig - the hull is based on a traditional Thames skiff with it's slender and graceful shape ending in an attractive "wineglass" transom. She has a centreboard arrangement and plenty of room inside...

20' Thames Skiff Plans

The Thames 20 rowing skiff is an elegant and very attractive skiff based upon a craft that we originally designed for a client who wanted a simple personal exercise craft which could be used on open inland waters. Construction uses the stitch and tape...

27' West Kerry Gig

There are some rowing races that take place at West Kerry in Eire using 27' rowing gigs. The races take place in the open sea, in harbours and estuaries where there is often a severe chop. Each gig takes a crew of 4 with an additional member acting as...

12' Thames Skiff Plans

This rowing skiff has been lightly modeled on the traditional Thames river skiffs. They were usually a lot longer and around 4' wide. Here, we have produced a design which will delight the rowing enthusiast who wants a light weight skiff with moderately...

15'4" Fly Fishing Coble Plans

This design has been based upon our Northumbrian Coble designs - the client wanted a very stable seaworthy design mainly for outboard power but which could also be rowed and take a sail plan. Basic construction is for stitch and tape but the moulds/jig...

24' New Bedford Whaler Plans

The New Bedford Whalers were renowned for their ruggedness and sea-kindly manner. Typically they were 28' or 30' long. I was asked to draw up the lines for a shorter version for a film company and decided to use this design work as the basis of a full...

15' V Bottomed Ruddy Duck Punt Plans

The Ruddy Duck has been based upon our simple flat bottomed Eider Duck Punt. We were asked to alter her for more serious rowing by a crew of 2 so we went for a double ended hull shape with a ‘V’ bottom and more rocker. The plans give details for...

Waif 12' Lightweight Rowing/Sailing Skiff Plans

This 12' x 4' rowing/sailing skiff was designed for Mr. M. Goodger who wanted a light, seaworthy skiff which would row well and optionally take a modest 35-50 sq ft sail. The attractive 5-plank hull is therefore based on the Stornoway 9. The drawings...

Crestwood Gig Plans PDF

While the MARIETTA YAWL and the CRESTWOOD GIG are designed to appeal to secondary school students and disadvantaged youth, they should interest others. Neither sex nor age nor athletic prowess are limiting factors. Some of the handicapped have become...

14' Thames Skiff Plans

This is a 14’ (4.27m) x 4’2” (1.27m) stitch and tape/clinker/ply Thames Skiff – similar to our Thames 12 skiff - for Mr. B. Lammerton - she retains the same “wineglass” type transom and construction is for stitch &...

15'1" Port Pegasus Plans

The Port Pegasus is a clinker boat which may be used as a pure rowing boat or fitted with a small diesel (ie Farymann 7.5) as a small motor launch with classic appearance.   As a general purpose launch, she could be fitted out in a variety of...

St. Bronagh 18' Strip Planked Skiff Plans

Plans are now available here for the double ended St.Bronagh skiff designed for Tyrone Boats for coastal rowing - she has a low wetted surface area hull capable of excellent performance in offshore conditions with two crew and a cox. The plans are for...

Loddon 20' Strip Planked or FRP Skiff Plans

The Loddon 20 is round bilged and can be made using foam sandwich (FRP) and strip plank Cedar construction methods. The moulds, transom and inner stem shape. She is designed for 2 or 3 rowing plus a cox or 2 rowing plus cox and passenger. The hull shape...

Deben 400 Rowing Skiff Plans

The Deben 400 is a rowing skiff inspired by the Cornish Flashboats—they were 18’ or more in length and used around Fowey for river transport. This version is just under 13’ long and for single recreational rowing. She has a narrow flat bottom...

Marietta Yawl Plans PDF

While competitive and recreational rowing is the reason behind the design, there are other possible uses for it. It can be rigged to sail, and being light and easily driven will go well with a fairly small rig. A centerboard trunk is an easy modification...

17' Thames Rowing Skiff

I have often been asked to stretch the basic Thames 12 design—using the same beam—to a skiff capable of having 2 rowing positions—we now have this in the 17’ Thames Skiff which has the same attractive 5 planks per side hull shape and using the...

15'2" Oarsome Plywood Skiff Plans

The Oarsome 15'2" skiff has been designed for the Oarsome Chance Foundation as a simple stitch and tape ply skiff. Oarsome Chance focuses on young people aged from 9 -19 years old who are disengaged from mainstream education and are at risk of...

16' Port Sorell Rowing Skiff Plans

The Port Sorell 16 is a skiff for rough waters having generous freeboard and fairly full sections fore and aft. This means, that for her type, she is a good load carrier and can be rowed single or double. For those wanting a good general purpose rowing...

25' Lakeland Plans

The Lakeland 25 is a modern double chined pulling boat designed for use on lakes, estuaries and offshore by outward bound organizations, scout groups etc. No frame set-up is required - she is made using simple stitch and tape techniques with computer...