Jerome Delaunay

Naut 475 / 15.5” –  metric.4.75 m x 1.84 m – 375 kg15.5” x 6” – 830 Lbs.Sail area 12/14 m² - 130/150 Sq.Ft.21 sheets of ACX 1/4, 5/16 to 3/8 – 6.5/8.5 mm plywood. A pocket cruiser for two, longer...

10-1/2 feet simple cruiser sailboat for one to three, design for protected or inlands waters. My brother "Samy" wanted to build a small river sailing boat. He likes the simplicity of an open boat but he also wants to sleep on board in a shelter.  So...

Jangadas are traditional fishing boat on the north coast of Brazil, originally simple log rafts. The Jangada 488 is a special surf scow, with the choice of a Bermudian or a crab claw rig, barn door or lifting rudder, and optional seating wings...

11.5 foot simple overnight cruiser sailboat for two, designed for protected or inland waters. With this plan I tried to go towards extreme minimalism, while remaining in the formula of the classic pocket cruiser. It's the smallest size that...

Simple sharpie pocket cruiser for coastal and off-shore cruising. This project start as a special order from “Tigrou”, a guy how really knows what he wants, and also a skilled boat builder. We have in common quite a fascination for junk sail...

Complete 3D building sequence with lot of details of the structure and frames. The basic plan is free .

A pocket cruiser for one, inspired by the “Around in Ten” challenge. In 2009, the “AIT” project was in the air, 5 boats where built, no one took the challenge, even Sven Lundin gave up. But the idea was then in my mind and I draw sketches...

A fast and narrow pocket cruiser, with a double bunk, and place for all your camping stuff.- LOA 4.70 m x beam 1.64 m- SA 9.9 m² - Bermudian or gaff rig. - Weight 250 kg- Weight full load 500 kg- Cruiser for two, daysailer for 3 (CE D/3)Full plans in...

14 foot simple cruiser sailboat for two overnight or three for a day cruise, design for protected or inlands waters. This scow should be a good compromise, with the comfort of the Scow 450, in a lighter and much simpler package. 11 sheets of ACX...

A friend asked me to draw a contemporary fast sailing dinghy. The hull shape has been tested in a VPP program. 6 sheets of ACX 5 mm, 1/5 plywood. Simple stitch & tape epoxy building, with glass fiber on the hull, chines and all edges...

A classical motor launch based on a simple plywood epoxy semi-dory hull. Rear self-draining cockpit, a central siting place with protecting coamings, and a forward locker with a hatch. The shape of the bottom is given by a central backbone where the...

14 foot simple cruising sailboat for two overnight or three for a day cruise, design for protected or inlands waters.A classic design pocket sailboat with 2 berths and a small cockpit.11 sheets of ACX 3/8" plywood.I recommend using epoxy, without glass...