Weekender Vertical Gudgeon MSRP: Now: $13.80 Add to Cart Racelite Heavy Duty Rudder Gudgeons MSRP: Now: $22.99 Choose Options Weekender Rudder Gudgeon MSRP: Now: $18.97 Canoe/Kayak Rudder Gudgeons MSRP: Was: Now: $8.62 - $18.28 Choose Options Racelite Light Duty Gudgeons MSRP: Now: $8.99 Add to Cart Racelite One Piece Gudgeons MSRP: Now: $16.96 Add to Cart Racelite Extra Heavy Duty Gudgeons MSRP: Now: $15.99 Add to Cart Ronstan Stainless Steel Gudgeons MSRP: Was: Now: $16.40 - $79.99 Choose Options Racelite 1/2" Heavy Duty Gudgeons MSRP: Was: Now: $13.50 - $14.25 Choose Options Kayak Rudder Mounting Gudgeons MSRP: Was: Now: $17.75 - $19.30 Choose Options Racelite Medium Duty Gudgeons MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons MSRP: Now: $24.95 Add to Cart Weekender Vertical Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They are designed to be mounted vertically in cases where the boat is a double-ender or where a... MSRP: Now: $13.80 Add to Cart Racelite Heavy Duty Rudder Gudgeons See our pintle & gudgeon compatibility chart Our RL-690 rudder gudgeons are similar to our RL-490 pintles but with no pin. They can be used with the RL-690 transom pintle or with the RL-490 gudgeon if a bolt or rod is run through... MSRP: Now: $22.99 Choose Options Weekender Rudder Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They can also be used on a skeg where a regular gudgeon is used as the upper pivot point. Weekender Rudder... MSRP: Now: $18.97 Canoe/Kayak Rudder Gudgeons For sharply pointed sterns After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the problem of attaching rudders to canoes and kayaks. Use two of... MSRP: Was: Now: $8.62 - $18.28 Choose Options Racelite Light Duty Gudgeons See our pintle & gudgeon compatibility chart Light duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-358Light duty stainless steel gudgeon 5/8" x 4" x 1/16"pin - 5/16"takes #10 fastener MSRP: Now: $8.99 Add to Cart Racelite One Piece Gudgeons A one piece gudgeon ideal for small boats such as PDRacers. Pintle holes are 5/16" but could be drilled to 3/8".Feedback:I recently installed a Racelite 358BR gudgeon as a retrofit on my son's PDRacer (Hull #491). The original rudder hardware consisted... MSRP: Now: $16.96 Add to Cart Racelite Extra Heavy Duty Gudgeons Extra Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-490Extra heavy duty stainless steel gudgeon thickness - .090" plus reinforcing strap3/4" wide x 5-1/4" long x 1" highpin - 3/8"takes... MSRP: Now: $15.99 Add to Cart Ronstan Stainless Steel Gudgeons These gudgeons are used together or with pintles having 1/4" pins. You can use a pin in each set, as in the illustration or a single pin going through all four gudgeons.Parts sold individually or as complete set. Pins not included. You may want a 1/4" SS... MSRP: Was: Now: $16.40 - $79.99 Choose Options Racelite 1/2" Heavy Duty Gudgeons Takes 1/2" pintles There are two different gudgeons in this style - one two hole and one four hole - both take 1/2" pintles. Each gudgeon is actually composed of two parts as shown below. All parts are stainless steel.Typically the four hole gudgeon is... MSRP: Was: Now: $13.50 - $14.25 Choose Options Kayak Rudder Mounting Gudgeons If you want to install a Sea-Lect TruCourse Rudder on your boat and it does not have a standard mounting gudgeon, you will need the appropriate gudgeon. Study the photos and diagrams below to determine which model you need. Four different... MSRP: Was: Now: $17.75 - $19.30 Choose Options Racelite Medium Duty Gudgeons Medium duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-360 gudgeonMedium duty stainless steel gudgeon thickness - 5/64"3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons Rudders from 1/2" to 1-3/8" A set consists of two gudgeons and two pintles. The parts here are sold individually OR in sets. The parts sold individually are represented in the first chart below - you'll need to order two each of the rudder gudgeons and... MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-390 gudgeonHeavy duty stainless steel gudgeon thickness - 5/64" 3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon sold individually - mounting fasteners not included MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons These gudgeons have 1/2" diameter holes for pins. The gudgeons and tangs are formed from 1/8" thick stainless steel and are very robust. We do not have pintles that fit these gudgeons. RL-890 1-1/4" x 1-7/8" x 5-1/4"accepts 1/2" pin mounting holes... MSRP: Now: $24.95 Add to Cart Compare Selected × OK
Racelite Heavy Duty Rudder Gudgeons MSRP: Now: $22.99 Choose Options Weekender Rudder Gudgeon MSRP: Now: $18.97 Canoe/Kayak Rudder Gudgeons MSRP: Was: Now: $8.62 - $18.28 Choose Options Racelite Light Duty Gudgeons MSRP: Now: $8.99 Add to Cart Racelite One Piece Gudgeons MSRP: Now: $16.96 Add to Cart Racelite Extra Heavy Duty Gudgeons MSRP: Now: $15.99 Add to Cart Ronstan Stainless Steel Gudgeons MSRP: Was: Now: $16.40 - $79.99 Choose Options Racelite 1/2" Heavy Duty Gudgeons MSRP: Was: Now: $13.50 - $14.25 Choose Options Kayak Rudder Mounting Gudgeons MSRP: Was: Now: $17.75 - $19.30 Choose Options Racelite Medium Duty Gudgeons MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons MSRP: Now: $24.95 Add to Cart Weekender Vertical Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They are designed to be mounted vertically in cases where the boat is a double-ender or where a... MSRP: Now: $13.80 Add to Cart Racelite Heavy Duty Rudder Gudgeons See our pintle & gudgeon compatibility chart Our RL-690 rudder gudgeons are similar to our RL-490 pintles but with no pin. They can be used with the RL-690 transom pintle or with the RL-490 gudgeon if a bolt or rod is run through... MSRP: Now: $22.99 Choose Options Weekender Rudder Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They can also be used on a skeg where a regular gudgeon is used as the upper pivot point. Weekender Rudder... MSRP: Now: $18.97 Canoe/Kayak Rudder Gudgeons For sharply pointed sterns After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the problem of attaching rudders to canoes and kayaks. Use two of... MSRP: Was: Now: $8.62 - $18.28 Choose Options Racelite Light Duty Gudgeons See our pintle & gudgeon compatibility chart Light duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-358Light duty stainless steel gudgeon 5/8" x 4" x 1/16"pin - 5/16"takes #10 fastener MSRP: Now: $8.99 Add to Cart Racelite One Piece Gudgeons A one piece gudgeon ideal for small boats such as PDRacers. Pintle holes are 5/16" but could be drilled to 3/8".Feedback:I recently installed a Racelite 358BR gudgeon as a retrofit on my son's PDRacer (Hull #491). The original rudder hardware consisted... MSRP: Now: $16.96 Add to Cart Racelite Extra Heavy Duty Gudgeons Extra Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-490Extra heavy duty stainless steel gudgeon thickness - .090" plus reinforcing strap3/4" wide x 5-1/4" long x 1" highpin - 3/8"takes... MSRP: Now: $15.99 Add to Cart Ronstan Stainless Steel Gudgeons These gudgeons are used together or with pintles having 1/4" pins. You can use a pin in each set, as in the illustration or a single pin going through all four gudgeons.Parts sold individually or as complete set. Pins not included. You may want a 1/4" SS... MSRP: Was: Now: $16.40 - $79.99 Choose Options Racelite 1/2" Heavy Duty Gudgeons Takes 1/2" pintles There are two different gudgeons in this style - one two hole and one four hole - both take 1/2" pintles. Each gudgeon is actually composed of two parts as shown below. All parts are stainless steel.Typically the four hole gudgeon is... MSRP: Was: Now: $13.50 - $14.25 Choose Options Kayak Rudder Mounting Gudgeons If you want to install a Sea-Lect TruCourse Rudder on your boat and it does not have a standard mounting gudgeon, you will need the appropriate gudgeon. Study the photos and diagrams below to determine which model you need. Four different... MSRP: Was: Now: $17.75 - $19.30 Choose Options Racelite Medium Duty Gudgeons Medium duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-360 gudgeonMedium duty stainless steel gudgeon thickness - 5/64"3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons Rudders from 1/2" to 1-3/8" A set consists of two gudgeons and two pintles. The parts here are sold individually OR in sets. The parts sold individually are represented in the first chart below - you'll need to order two each of the rudder gudgeons and... MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-390 gudgeonHeavy duty stainless steel gudgeon thickness - 5/64" 3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon sold individually - mounting fasteners not included MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons These gudgeons have 1/2" diameter holes for pins. The gudgeons and tangs are formed from 1/8" thick stainless steel and are very robust. We do not have pintles that fit these gudgeons. RL-890 1-1/4" x 1-7/8" x 5-1/4"accepts 1/2" pin mounting holes... MSRP: Now: $24.95 Add to Cart Compare Selected × OK
Weekender Rudder Gudgeon MSRP: Now: $18.97 Canoe/Kayak Rudder Gudgeons MSRP: Was: Now: $8.62 - $18.28 Choose Options Racelite Light Duty Gudgeons MSRP: Now: $8.99 Add to Cart Racelite One Piece Gudgeons MSRP: Now: $16.96 Add to Cart Racelite Extra Heavy Duty Gudgeons MSRP: Now: $15.99 Add to Cart Ronstan Stainless Steel Gudgeons MSRP: Was: Now: $16.40 - $79.99 Choose Options Racelite 1/2" Heavy Duty Gudgeons MSRP: Was: Now: $13.50 - $14.25 Choose Options Kayak Rudder Mounting Gudgeons MSRP: Was: Now: $17.75 - $19.30 Choose Options Racelite Medium Duty Gudgeons MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons MSRP: Now: $24.95 Add to Cart Weekender Vertical Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They are designed to be mounted vertically in cases where the boat is a double-ender or where a... MSRP: Now: $13.80 Add to Cart Racelite Heavy Duty Rudder Gudgeons See our pintle & gudgeon compatibility chart Our RL-690 rudder gudgeons are similar to our RL-490 pintles but with no pin. They can be used with the RL-690 transom pintle or with the RL-490 gudgeon if a bolt or rod is run through... MSRP: Now: $22.99 Choose Options Weekender Rudder Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They can also be used on a skeg where a regular gudgeon is used as the upper pivot point. Weekender Rudder... MSRP: Now: $18.97 Canoe/Kayak Rudder Gudgeons For sharply pointed sterns After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the problem of attaching rudders to canoes and kayaks. Use two of... MSRP: Was: Now: $8.62 - $18.28 Choose Options Racelite Light Duty Gudgeons See our pintle & gudgeon compatibility chart Light duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-358Light duty stainless steel gudgeon 5/8" x 4" x 1/16"pin - 5/16"takes #10 fastener MSRP: Now: $8.99 Add to Cart Racelite One Piece Gudgeons A one piece gudgeon ideal for small boats such as PDRacers. Pintle holes are 5/16" but could be drilled to 3/8".Feedback:I recently installed a Racelite 358BR gudgeon as a retrofit on my son's PDRacer (Hull #491). The original rudder hardware consisted... MSRP: Now: $16.96 Add to Cart Racelite Extra Heavy Duty Gudgeons Extra Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-490Extra heavy duty stainless steel gudgeon thickness - .090" plus reinforcing strap3/4" wide x 5-1/4" long x 1" highpin - 3/8"takes... MSRP: Now: $15.99 Add to Cart Ronstan Stainless Steel Gudgeons These gudgeons are used together or with pintles having 1/4" pins. You can use a pin in each set, as in the illustration or a single pin going through all four gudgeons.Parts sold individually or as complete set. Pins not included. You may want a 1/4" SS... MSRP: Was: Now: $16.40 - $79.99 Choose Options Racelite 1/2" Heavy Duty Gudgeons Takes 1/2" pintles There are two different gudgeons in this style - one two hole and one four hole - both take 1/2" pintles. Each gudgeon is actually composed of two parts as shown below. All parts are stainless steel.Typically the four hole gudgeon is... MSRP: Was: Now: $13.50 - $14.25 Choose Options Kayak Rudder Mounting Gudgeons If you want to install a Sea-Lect TruCourse Rudder on your boat and it does not have a standard mounting gudgeon, you will need the appropriate gudgeon. Study the photos and diagrams below to determine which model you need. Four different... MSRP: Was: Now: $17.75 - $19.30 Choose Options Racelite Medium Duty Gudgeons Medium duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-360 gudgeonMedium duty stainless steel gudgeon thickness - 5/64"3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons Rudders from 1/2" to 1-3/8" A set consists of two gudgeons and two pintles. The parts here are sold individually OR in sets. The parts sold individually are represented in the first chart below - you'll need to order two each of the rudder gudgeons and... MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-390 gudgeonHeavy duty stainless steel gudgeon thickness - 5/64" 3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon sold individually - mounting fasteners not included MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons These gudgeons have 1/2" diameter holes for pins. The gudgeons and tangs are formed from 1/8" thick stainless steel and are very robust. We do not have pintles that fit these gudgeons. RL-890 1-1/4" x 1-7/8" x 5-1/4"accepts 1/2" pin mounting holes... MSRP: Now: $24.95 Add to Cart Compare Selected × OK
Racelite Light Duty Gudgeons MSRP: Now: $8.99 Add to Cart Racelite One Piece Gudgeons MSRP: Now: $16.96 Add to Cart Racelite Extra Heavy Duty Gudgeons MSRP: Now: $15.99 Add to Cart Ronstan Stainless Steel Gudgeons MSRP: Was: Now: $16.40 - $79.99 Choose Options Racelite 1/2" Heavy Duty Gudgeons MSRP: Was: Now: $13.50 - $14.25 Choose Options Kayak Rudder Mounting Gudgeons MSRP: Was: Now: $17.75 - $19.30 Choose Options Racelite Medium Duty Gudgeons MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons MSRP: Now: $24.95 Add to Cart Weekender Vertical Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They are designed to be mounted vertically in cases where the boat is a double-ender or where a... MSRP: Now: $13.80 Add to Cart Racelite Heavy Duty Rudder Gudgeons See our pintle & gudgeon compatibility chart Our RL-690 rudder gudgeons are similar to our RL-490 pintles but with no pin. They can be used with the RL-690 transom pintle or with the RL-490 gudgeon if a bolt or rod is run through... MSRP: Now: $22.99 Choose Options Weekender Rudder Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They can also be used on a skeg where a regular gudgeon is used as the upper pivot point. Weekender Rudder... MSRP: Now: $18.97 Canoe/Kayak Rudder Gudgeons For sharply pointed sterns After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the problem of attaching rudders to canoes and kayaks. Use two of... MSRP: Was: Now: $8.62 - $18.28 Choose Options Racelite Light Duty Gudgeons See our pintle & gudgeon compatibility chart Light duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-358Light duty stainless steel gudgeon 5/8" x 4" x 1/16"pin - 5/16"takes #10 fastener MSRP: Now: $8.99 Add to Cart Racelite One Piece Gudgeons A one piece gudgeon ideal for small boats such as PDRacers. Pintle holes are 5/16" but could be drilled to 3/8".Feedback:I recently installed a Racelite 358BR gudgeon as a retrofit on my son's PDRacer (Hull #491). The original rudder hardware consisted... MSRP: Now: $16.96 Add to Cart Racelite Extra Heavy Duty Gudgeons Extra Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-490Extra heavy duty stainless steel gudgeon thickness - .090" plus reinforcing strap3/4" wide x 5-1/4" long x 1" highpin - 3/8"takes... MSRP: Now: $15.99 Add to Cart Ronstan Stainless Steel Gudgeons These gudgeons are used together or with pintles having 1/4" pins. You can use a pin in each set, as in the illustration or a single pin going through all four gudgeons.Parts sold individually or as complete set. Pins not included. You may want a 1/4" SS... MSRP: Was: Now: $16.40 - $79.99 Choose Options Racelite 1/2" Heavy Duty Gudgeons Takes 1/2" pintles There are two different gudgeons in this style - one two hole and one four hole - both take 1/2" pintles. Each gudgeon is actually composed of two parts as shown below. All parts are stainless steel.Typically the four hole gudgeon is... MSRP: Was: Now: $13.50 - $14.25 Choose Options Kayak Rudder Mounting Gudgeons If you want to install a Sea-Lect TruCourse Rudder on your boat and it does not have a standard mounting gudgeon, you will need the appropriate gudgeon. Study the photos and diagrams below to determine which model you need. Four different... MSRP: Was: Now: $17.75 - $19.30 Choose Options Racelite Medium Duty Gudgeons Medium duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-360 gudgeonMedium duty stainless steel gudgeon thickness - 5/64"3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons Rudders from 1/2" to 1-3/8" A set consists of two gudgeons and two pintles. The parts here are sold individually OR in sets. The parts sold individually are represented in the first chart below - you'll need to order two each of the rudder gudgeons and... MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-390 gudgeonHeavy duty stainless steel gudgeon thickness - 5/64" 3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon sold individually - mounting fasteners not included MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons These gudgeons have 1/2" diameter holes for pins. The gudgeons and tangs are formed from 1/8" thick stainless steel and are very robust. We do not have pintles that fit these gudgeons. RL-890 1-1/4" x 1-7/8" x 5-1/4"accepts 1/2" pin mounting holes... MSRP: Now: $24.95 Add to Cart Compare Selected × OK
Racelite One Piece Gudgeons MSRP: Now: $16.96 Add to Cart Racelite Extra Heavy Duty Gudgeons MSRP: Now: $15.99 Add to Cart Ronstan Stainless Steel Gudgeons MSRP: Was: Now: $16.40 - $79.99 Choose Options Racelite 1/2" Heavy Duty Gudgeons MSRP: Was: Now: $13.50 - $14.25 Choose Options Kayak Rudder Mounting Gudgeons MSRP: Was: Now: $17.75 - $19.30 Choose Options Racelite Medium Duty Gudgeons MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons MSRP: Now: $24.95 Add to Cart Weekender Vertical Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They are designed to be mounted vertically in cases where the boat is a double-ender or where a... MSRP: Now: $13.80 Add to Cart Racelite Heavy Duty Rudder Gudgeons See our pintle & gudgeon compatibility chart Our RL-690 rudder gudgeons are similar to our RL-490 pintles but with no pin. They can be used with the RL-690 transom pintle or with the RL-490 gudgeon if a bolt or rod is run through... MSRP: Now: $22.99 Choose Options Weekender Rudder Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They can also be used on a skeg where a regular gudgeon is used as the upper pivot point. Weekender Rudder... MSRP: Now: $18.97 Canoe/Kayak Rudder Gudgeons For sharply pointed sterns After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the problem of attaching rudders to canoes and kayaks. Use two of... MSRP: Was: Now: $8.62 - $18.28 Choose Options Racelite Light Duty Gudgeons See our pintle & gudgeon compatibility chart Light duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-358Light duty stainless steel gudgeon 5/8" x 4" x 1/16"pin - 5/16"takes #10 fastener MSRP: Now: $8.99 Add to Cart Racelite One Piece Gudgeons A one piece gudgeon ideal for small boats such as PDRacers. Pintle holes are 5/16" but could be drilled to 3/8".Feedback:I recently installed a Racelite 358BR gudgeon as a retrofit on my son's PDRacer (Hull #491). The original rudder hardware consisted... MSRP: Now: $16.96 Add to Cart Racelite Extra Heavy Duty Gudgeons Extra Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-490Extra heavy duty stainless steel gudgeon thickness - .090" plus reinforcing strap3/4" wide x 5-1/4" long x 1" highpin - 3/8"takes... MSRP: Now: $15.99 Add to Cart Ronstan Stainless Steel Gudgeons These gudgeons are used together or with pintles having 1/4" pins. You can use a pin in each set, as in the illustration or a single pin going through all four gudgeons.Parts sold individually or as complete set. Pins not included. You may want a 1/4" SS... MSRP: Was: Now: $16.40 - $79.99 Choose Options Racelite 1/2" Heavy Duty Gudgeons Takes 1/2" pintles There are two different gudgeons in this style - one two hole and one four hole - both take 1/2" pintles. Each gudgeon is actually composed of two parts as shown below. All parts are stainless steel.Typically the four hole gudgeon is... MSRP: Was: Now: $13.50 - $14.25 Choose Options Kayak Rudder Mounting Gudgeons If you want to install a Sea-Lect TruCourse Rudder on your boat and it does not have a standard mounting gudgeon, you will need the appropriate gudgeon. Study the photos and diagrams below to determine which model you need. Four different... MSRP: Was: Now: $17.75 - $19.30 Choose Options Racelite Medium Duty Gudgeons Medium duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-360 gudgeonMedium duty stainless steel gudgeon thickness - 5/64"3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons Rudders from 1/2" to 1-3/8" A set consists of two gudgeons and two pintles. The parts here are sold individually OR in sets. The parts sold individually are represented in the first chart below - you'll need to order two each of the rudder gudgeons and... MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-390 gudgeonHeavy duty stainless steel gudgeon thickness - 5/64" 3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon sold individually - mounting fasteners not included MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons These gudgeons have 1/2" diameter holes for pins. The gudgeons and tangs are formed from 1/8" thick stainless steel and are very robust. We do not have pintles that fit these gudgeons. RL-890 1-1/4" x 1-7/8" x 5-1/4"accepts 1/2" pin mounting holes... MSRP: Now: $24.95 Add to Cart Compare Selected × OK
Racelite Extra Heavy Duty Gudgeons MSRP: Now: $15.99 Add to Cart Ronstan Stainless Steel Gudgeons MSRP: Was: Now: $16.40 - $79.99 Choose Options Racelite 1/2" Heavy Duty Gudgeons MSRP: Was: Now: $13.50 - $14.25 Choose Options Kayak Rudder Mounting Gudgeons MSRP: Was: Now: $17.75 - $19.30 Choose Options Racelite Medium Duty Gudgeons MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons MSRP: Now: $24.95 Add to Cart Weekender Vertical Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They are designed to be mounted vertically in cases where the boat is a double-ender or where a... MSRP: Now: $13.80 Add to Cart Racelite Heavy Duty Rudder Gudgeons See our pintle & gudgeon compatibility chart Our RL-690 rudder gudgeons are similar to our RL-490 pintles but with no pin. They can be used with the RL-690 transom pintle or with the RL-490 gudgeon if a bolt or rod is run through... MSRP: Now: $22.99 Choose Options Weekender Rudder Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They can also be used on a skeg where a regular gudgeon is used as the upper pivot point. Weekender Rudder... MSRP: Now: $18.97 Canoe/Kayak Rudder Gudgeons For sharply pointed sterns After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the problem of attaching rudders to canoes and kayaks. Use two of... MSRP: Was: Now: $8.62 - $18.28 Choose Options Racelite Light Duty Gudgeons See our pintle & gudgeon compatibility chart Light duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-358Light duty stainless steel gudgeon 5/8" x 4" x 1/16"pin - 5/16"takes #10 fastener MSRP: Now: $8.99 Add to Cart Racelite One Piece Gudgeons A one piece gudgeon ideal for small boats such as PDRacers. Pintle holes are 5/16" but could be drilled to 3/8".Feedback:I recently installed a Racelite 358BR gudgeon as a retrofit on my son's PDRacer (Hull #491). The original rudder hardware consisted... MSRP: Now: $16.96 Add to Cart Racelite Extra Heavy Duty Gudgeons Extra Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-490Extra heavy duty stainless steel gudgeon thickness - .090" plus reinforcing strap3/4" wide x 5-1/4" long x 1" highpin - 3/8"takes... MSRP: Now: $15.99 Add to Cart Ronstan Stainless Steel Gudgeons These gudgeons are used together or with pintles having 1/4" pins. You can use a pin in each set, as in the illustration or a single pin going through all four gudgeons.Parts sold individually or as complete set. Pins not included. You may want a 1/4" SS... MSRP: Was: Now: $16.40 - $79.99 Choose Options Racelite 1/2" Heavy Duty Gudgeons Takes 1/2" pintles There are two different gudgeons in this style - one two hole and one four hole - both take 1/2" pintles. Each gudgeon is actually composed of two parts as shown below. All parts are stainless steel.Typically the four hole gudgeon is... MSRP: Was: Now: $13.50 - $14.25 Choose Options Kayak Rudder Mounting Gudgeons If you want to install a Sea-Lect TruCourse Rudder on your boat and it does not have a standard mounting gudgeon, you will need the appropriate gudgeon. Study the photos and diagrams below to determine which model you need. Four different... MSRP: Was: Now: $17.75 - $19.30 Choose Options Racelite Medium Duty Gudgeons Medium duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-360 gudgeonMedium duty stainless steel gudgeon thickness - 5/64"3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons Rudders from 1/2" to 1-3/8" A set consists of two gudgeons and two pintles. The parts here are sold individually OR in sets. The parts sold individually are represented in the first chart below - you'll need to order two each of the rudder gudgeons and... MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-390 gudgeonHeavy duty stainless steel gudgeon thickness - 5/64" 3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon sold individually - mounting fasteners not included MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons These gudgeons have 1/2" diameter holes for pins. The gudgeons and tangs are formed from 1/8" thick stainless steel and are very robust. We do not have pintles that fit these gudgeons. RL-890 1-1/4" x 1-7/8" x 5-1/4"accepts 1/2" pin mounting holes... MSRP: Now: $24.95 Add to Cart Compare Selected × OK
Racelite Medium Duty Gudgeons MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons MSRP: Now: $24.95 Add to Cart Weekender Vertical Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They are designed to be mounted vertically in cases where the boat is a double-ender or where a... MSRP: Now: $13.80 Add to Cart Racelite Heavy Duty Rudder Gudgeons See our pintle & gudgeon compatibility chart Our RL-690 rudder gudgeons are similar to our RL-490 pintles but with no pin. They can be used with the RL-690 transom pintle or with the RL-490 gudgeon if a bolt or rod is run through... MSRP: Now: $22.99 Choose Options Weekender Rudder Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They can also be used on a skeg where a regular gudgeon is used as the upper pivot point. Weekender Rudder... MSRP: Now: $18.97 Canoe/Kayak Rudder Gudgeons For sharply pointed sterns After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the problem of attaching rudders to canoes and kayaks. Use two of... MSRP: Was: Now: $8.62 - $18.28 Choose Options Racelite Light Duty Gudgeons See our pintle & gudgeon compatibility chart Light duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-358Light duty stainless steel gudgeon 5/8" x 4" x 1/16"pin - 5/16"takes #10 fastener MSRP: Now: $8.99 Add to Cart Racelite One Piece Gudgeons A one piece gudgeon ideal for small boats such as PDRacers. Pintle holes are 5/16" but could be drilled to 3/8".Feedback:I recently installed a Racelite 358BR gudgeon as a retrofit on my son's PDRacer (Hull #491). The original rudder hardware consisted... MSRP: Now: $16.96 Add to Cart Racelite Extra Heavy Duty Gudgeons Extra Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-490Extra heavy duty stainless steel gudgeon thickness - .090" plus reinforcing strap3/4" wide x 5-1/4" long x 1" highpin - 3/8"takes... MSRP: Now: $15.99 Add to Cart Ronstan Stainless Steel Gudgeons These gudgeons are used together or with pintles having 1/4" pins. You can use a pin in each set, as in the illustration or a single pin going through all four gudgeons.Parts sold individually or as complete set. Pins not included. You may want a 1/4" SS... MSRP: Was: Now: $16.40 - $79.99 Choose Options Racelite 1/2" Heavy Duty Gudgeons Takes 1/2" pintles There are two different gudgeons in this style - one two hole and one four hole - both take 1/2" pintles. Each gudgeon is actually composed of two parts as shown below. All parts are stainless steel.Typically the four hole gudgeon is... MSRP: Was: Now: $13.50 - $14.25 Choose Options Kayak Rudder Mounting Gudgeons If you want to install a Sea-Lect TruCourse Rudder on your boat and it does not have a standard mounting gudgeon, you will need the appropriate gudgeon. Study the photos and diagrams below to determine which model you need. Four different... MSRP: Was: Now: $17.75 - $19.30 Choose Options Racelite Medium Duty Gudgeons Medium duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-360 gudgeonMedium duty stainless steel gudgeon thickness - 5/64"3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons Rudders from 1/2" to 1-3/8" A set consists of two gudgeons and two pintles. The parts here are sold individually OR in sets. The parts sold individually are represented in the first chart below - you'll need to order two each of the rudder gudgeons and... MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-390 gudgeonHeavy duty stainless steel gudgeon thickness - 5/64" 3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon sold individually - mounting fasteners not included MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons These gudgeons have 1/2" diameter holes for pins. The gudgeons and tangs are formed from 1/8" thick stainless steel and are very robust. We do not have pintles that fit these gudgeons. RL-890 1-1/4" x 1-7/8" x 5-1/4"accepts 1/2" pin mounting holes... MSRP: Now: $24.95 Add to Cart Compare Selected × OK
Racelite Heavy Duty Gudgeons MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons MSRP: Now: $24.95 Add to Cart Weekender Vertical Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They are designed to be mounted vertically in cases where the boat is a double-ender or where a... MSRP: Now: $13.80 Add to Cart Racelite Heavy Duty Rudder Gudgeons See our pintle & gudgeon compatibility chart Our RL-690 rudder gudgeons are similar to our RL-490 pintles but with no pin. They can be used with the RL-690 transom pintle or with the RL-490 gudgeon if a bolt or rod is run through... MSRP: Now: $22.99 Choose Options Weekender Rudder Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They can also be used on a skeg where a regular gudgeon is used as the upper pivot point. Weekender Rudder... MSRP: Now: $18.97 Canoe/Kayak Rudder Gudgeons For sharply pointed sterns After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the problem of attaching rudders to canoes and kayaks. Use two of... MSRP: Was: Now: $8.62 - $18.28 Choose Options Racelite Light Duty Gudgeons See our pintle & gudgeon compatibility chart Light duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-358Light duty stainless steel gudgeon 5/8" x 4" x 1/16"pin - 5/16"takes #10 fastener MSRP: Now: $8.99 Add to Cart Racelite One Piece Gudgeons A one piece gudgeon ideal for small boats such as PDRacers. Pintle holes are 5/16" but could be drilled to 3/8".Feedback:I recently installed a Racelite 358BR gudgeon as a retrofit on my son's PDRacer (Hull #491). The original rudder hardware consisted... MSRP: Now: $16.96 Add to Cart Racelite Extra Heavy Duty Gudgeons Extra Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-490Extra heavy duty stainless steel gudgeon thickness - .090" plus reinforcing strap3/4" wide x 5-1/4" long x 1" highpin - 3/8"takes... MSRP: Now: $15.99 Add to Cart Ronstan Stainless Steel Gudgeons These gudgeons are used together or with pintles having 1/4" pins. You can use a pin in each set, as in the illustration or a single pin going through all four gudgeons.Parts sold individually or as complete set. Pins not included. You may want a 1/4" SS... MSRP: Was: Now: $16.40 - $79.99 Choose Options Racelite 1/2" Heavy Duty Gudgeons Takes 1/2" pintles There are two different gudgeons in this style - one two hole and one four hole - both take 1/2" pintles. Each gudgeon is actually composed of two parts as shown below. All parts are stainless steel.Typically the four hole gudgeon is... MSRP: Was: Now: $13.50 - $14.25 Choose Options Kayak Rudder Mounting Gudgeons If you want to install a Sea-Lect TruCourse Rudder on your boat and it does not have a standard mounting gudgeon, you will need the appropriate gudgeon. Study the photos and diagrams below to determine which model you need. Four different... MSRP: Was: Now: $17.75 - $19.30 Choose Options Racelite Medium Duty Gudgeons Medium duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-360 gudgeonMedium duty stainless steel gudgeon thickness - 5/64"3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons Rudders from 1/2" to 1-3/8" A set consists of two gudgeons and two pintles. The parts here are sold individually OR in sets. The parts sold individually are represented in the first chart below - you'll need to order two each of the rudder gudgeons and... MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-390 gudgeonHeavy duty stainless steel gudgeon thickness - 5/64" 3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon sold individually - mounting fasteners not included MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons These gudgeons have 1/2" diameter holes for pins. The gudgeons and tangs are formed from 1/8" thick stainless steel and are very robust. We do not have pintles that fit these gudgeons. RL-890 1-1/4" x 1-7/8" x 5-1/4"accepts 1/2" pin mounting holes... MSRP: Now: $24.95 Add to Cart Compare Selected × OK
Factory West Wight Potter 15 and 19 Gudgeon MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons MSRP: Now: $24.95 Add to Cart Weekender Vertical Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They are designed to be mounted vertically in cases where the boat is a double-ender or where a... MSRP: Now: $13.80 Add to Cart Racelite Heavy Duty Rudder Gudgeons See our pintle & gudgeon compatibility chart Our RL-690 rudder gudgeons are similar to our RL-490 pintles but with no pin. They can be used with the RL-690 transom pintle or with the RL-490 gudgeon if a bolt or rod is run through... MSRP: Now: $22.99 Choose Options Weekender Rudder Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They can also be used on a skeg where a regular gudgeon is used as the upper pivot point. Weekender Rudder... MSRP: Now: $18.97 Canoe/Kayak Rudder Gudgeons For sharply pointed sterns After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the problem of attaching rudders to canoes and kayaks. Use two of... MSRP: Was: Now: $8.62 - $18.28 Choose Options Racelite Light Duty Gudgeons See our pintle & gudgeon compatibility chart Light duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-358Light duty stainless steel gudgeon 5/8" x 4" x 1/16"pin - 5/16"takes #10 fastener MSRP: Now: $8.99 Add to Cart Racelite One Piece Gudgeons A one piece gudgeon ideal for small boats such as PDRacers. Pintle holes are 5/16" but could be drilled to 3/8".Feedback:I recently installed a Racelite 358BR gudgeon as a retrofit on my son's PDRacer (Hull #491). The original rudder hardware consisted... MSRP: Now: $16.96 Add to Cart Racelite Extra Heavy Duty Gudgeons Extra Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-490Extra heavy duty stainless steel gudgeon thickness - .090" plus reinforcing strap3/4" wide x 5-1/4" long x 1" highpin - 3/8"takes... MSRP: Now: $15.99 Add to Cart Ronstan Stainless Steel Gudgeons These gudgeons are used together or with pintles having 1/4" pins. You can use a pin in each set, as in the illustration or a single pin going through all four gudgeons.Parts sold individually or as complete set. Pins not included. You may want a 1/4" SS... MSRP: Was: Now: $16.40 - $79.99 Choose Options Racelite 1/2" Heavy Duty Gudgeons Takes 1/2" pintles There are two different gudgeons in this style - one two hole and one four hole - both take 1/2" pintles. Each gudgeon is actually composed of two parts as shown below. All parts are stainless steel.Typically the four hole gudgeon is... MSRP: Was: Now: $13.50 - $14.25 Choose Options Kayak Rudder Mounting Gudgeons If you want to install a Sea-Lect TruCourse Rudder on your boat and it does not have a standard mounting gudgeon, you will need the appropriate gudgeon. Study the photos and diagrams below to determine which model you need. Four different... MSRP: Was: Now: $17.75 - $19.30 Choose Options Racelite Medium Duty Gudgeons Medium duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-360 gudgeonMedium duty stainless steel gudgeon thickness - 5/64"3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons Rudders from 1/2" to 1-3/8" A set consists of two gudgeons and two pintles. The parts here are sold individually OR in sets. The parts sold individually are represented in the first chart below - you'll need to order two each of the rudder gudgeons and... MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-390 gudgeonHeavy duty stainless steel gudgeon thickness - 5/64" 3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon sold individually - mounting fasteners not included MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons These gudgeons have 1/2" diameter holes for pins. The gudgeons and tangs are formed from 1/8" thick stainless steel and are very robust. We do not have pintles that fit these gudgeons. RL-890 1-1/4" x 1-7/8" x 5-1/4"accepts 1/2" pin mounting holes... MSRP: Now: $24.95 Add to Cart Compare Selected × OK
Extra Heavy Duty 1/2" Gudgeons MSRP: Now: $24.95 Add to Cart Weekender Vertical Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They are designed to be mounted vertically in cases where the boat is a double-ender or where a... MSRP: Now: $13.80 Add to Cart Racelite Heavy Duty Rudder Gudgeons See our pintle & gudgeon compatibility chart Our RL-690 rudder gudgeons are similar to our RL-490 pintles but with no pin. They can be used with the RL-690 transom pintle or with the RL-490 gudgeon if a bolt or rod is run through... MSRP: Now: $22.99 Choose Options Weekender Rudder Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They can also be used on a skeg where a regular gudgeon is used as the upper pivot point. Weekender Rudder... MSRP: Now: $18.97 Canoe/Kayak Rudder Gudgeons For sharply pointed sterns After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the problem of attaching rudders to canoes and kayaks. Use two of... MSRP: Was: Now: $8.62 - $18.28 Choose Options Racelite Light Duty Gudgeons See our pintle & gudgeon compatibility chart Light duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-358Light duty stainless steel gudgeon 5/8" x 4" x 1/16"pin - 5/16"takes #10 fastener MSRP: Now: $8.99 Add to Cart Racelite One Piece Gudgeons A one piece gudgeon ideal for small boats such as PDRacers. Pintle holes are 5/16" but could be drilled to 3/8".Feedback:I recently installed a Racelite 358BR gudgeon as a retrofit on my son's PDRacer (Hull #491). The original rudder hardware consisted... MSRP: Now: $16.96 Add to Cart Racelite Extra Heavy Duty Gudgeons Extra Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-490Extra heavy duty stainless steel gudgeon thickness - .090" plus reinforcing strap3/4" wide x 5-1/4" long x 1" highpin - 3/8"takes... MSRP: Now: $15.99 Add to Cart Ronstan Stainless Steel Gudgeons These gudgeons are used together or with pintles having 1/4" pins. You can use a pin in each set, as in the illustration or a single pin going through all four gudgeons.Parts sold individually or as complete set. Pins not included. You may want a 1/4" SS... MSRP: Was: Now: $16.40 - $79.99 Choose Options Racelite 1/2" Heavy Duty Gudgeons Takes 1/2" pintles There are two different gudgeons in this style - one two hole and one four hole - both take 1/2" pintles. Each gudgeon is actually composed of two parts as shown below. All parts are stainless steel.Typically the four hole gudgeon is... MSRP: Was: Now: $13.50 - $14.25 Choose Options Kayak Rudder Mounting Gudgeons If you want to install a Sea-Lect TruCourse Rudder on your boat and it does not have a standard mounting gudgeon, you will need the appropriate gudgeon. Study the photos and diagrams below to determine which model you need. Four different... MSRP: Was: Now: $17.75 - $19.30 Choose Options Racelite Medium Duty Gudgeons Medium duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-360 gudgeonMedium duty stainless steel gudgeon thickness - 5/64"3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons Rudders from 1/2" to 1-3/8" A set consists of two gudgeons and two pintles. The parts here are sold individually OR in sets. The parts sold individually are represented in the first chart below - you'll need to order two each of the rudder gudgeons and... MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-390 gudgeonHeavy duty stainless steel gudgeon thickness - 5/64" 3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon sold individually - mounting fasteners not included MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons These gudgeons have 1/2" diameter holes for pins. The gudgeons and tangs are formed from 1/8" thick stainless steel and are very robust. We do not have pintles that fit these gudgeons. RL-890 1-1/4" x 1-7/8" x 5-1/4"accepts 1/2" pin mounting holes... MSRP: Now: $24.95 Add to Cart Compare Selected × OK
Weekender Vertical Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They are designed to be mounted vertically in cases where the boat is a double-ender or where a... MSRP: Now: $13.80 Add to Cart Racelite Heavy Duty Rudder Gudgeons See our pintle & gudgeon compatibility chart Our RL-690 rudder gudgeons are similar to our RL-490 pintles but with no pin. They can be used with the RL-690 transom pintle or with the RL-490 gudgeon if a bolt or rod is run through... MSRP: Now: $22.99 Choose Options Weekender Rudder Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They can also be used on a skeg where a regular gudgeon is used as the upper pivot point. Weekender Rudder... MSRP: Now: $18.97 Canoe/Kayak Rudder Gudgeons For sharply pointed sterns After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the problem of attaching rudders to canoes and kayaks. Use two of... MSRP: Was: Now: $8.62 - $18.28 Choose Options Racelite Light Duty Gudgeons See our pintle & gudgeon compatibility chart Light duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-358Light duty stainless steel gudgeon 5/8" x 4" x 1/16"pin - 5/16"takes #10 fastener MSRP: Now: $8.99 Add to Cart Racelite One Piece Gudgeons A one piece gudgeon ideal for small boats such as PDRacers. Pintle holes are 5/16" but could be drilled to 3/8".Feedback:I recently installed a Racelite 358BR gudgeon as a retrofit on my son's PDRacer (Hull #491). The original rudder hardware consisted... MSRP: Now: $16.96 Add to Cart Racelite Extra Heavy Duty Gudgeons Extra Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-490Extra heavy duty stainless steel gudgeon thickness - .090" plus reinforcing strap3/4" wide x 5-1/4" long x 1" highpin - 3/8"takes... MSRP: Now: $15.99 Add to Cart Ronstan Stainless Steel Gudgeons These gudgeons are used together or with pintles having 1/4" pins. You can use a pin in each set, as in the illustration or a single pin going through all four gudgeons.Parts sold individually or as complete set. Pins not included. You may want a 1/4" SS... MSRP: Was: Now: $16.40 - $79.99 Choose Options Racelite 1/2" Heavy Duty Gudgeons Takes 1/2" pintles There are two different gudgeons in this style - one two hole and one four hole - both take 1/2" pintles. Each gudgeon is actually composed of two parts as shown below. All parts are stainless steel.Typically the four hole gudgeon is... MSRP: Was: Now: $13.50 - $14.25 Choose Options Kayak Rudder Mounting Gudgeons If you want to install a Sea-Lect TruCourse Rudder on your boat and it does not have a standard mounting gudgeon, you will need the appropriate gudgeon. Study the photos and diagrams below to determine which model you need. Four different... MSRP: Was: Now: $17.75 - $19.30 Choose Options Racelite Medium Duty Gudgeons Medium duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-360 gudgeonMedium duty stainless steel gudgeon thickness - 5/64"3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons Rudders from 1/2" to 1-3/8" A set consists of two gudgeons and two pintles. The parts here are sold individually OR in sets. The parts sold individually are represented in the first chart below - you'll need to order two each of the rudder gudgeons and... MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-390 gudgeonHeavy duty stainless steel gudgeon thickness - 5/64" 3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon sold individually - mounting fasteners not included MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons These gudgeons have 1/2" diameter holes for pins. The gudgeons and tangs are formed from 1/8" thick stainless steel and are very robust. We do not have pintles that fit these gudgeons. RL-890 1-1/4" x 1-7/8" x 5-1/4"accepts 1/2" pin mounting holes... MSRP: Now: $24.95 Add to Cart Compare Selected × OK
Racelite Heavy Duty Rudder Gudgeons See our pintle & gudgeon compatibility chart Our RL-690 rudder gudgeons are similar to our RL-490 pintles but with no pin. They can be used with the RL-690 transom pintle or with the RL-490 gudgeon if a bolt or rod is run through... MSRP: Now: $22.99 Choose Options Weekender Rudder Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They can also be used on a skeg where a regular gudgeon is used as the upper pivot point. Weekender Rudder... MSRP: Now: $18.97 Canoe/Kayak Rudder Gudgeons For sharply pointed sterns After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the problem of attaching rudders to canoes and kayaks. Use two of... MSRP: Was: Now: $8.62 - $18.28 Choose Options Racelite Light Duty Gudgeons See our pintle & gudgeon compatibility chart Light duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-358Light duty stainless steel gudgeon 5/8" x 4" x 1/16"pin - 5/16"takes #10 fastener MSRP: Now: $8.99 Add to Cart Racelite One Piece Gudgeons A one piece gudgeon ideal for small boats such as PDRacers. Pintle holes are 5/16" but could be drilled to 3/8".Feedback:I recently installed a Racelite 358BR gudgeon as a retrofit on my son's PDRacer (Hull #491). The original rudder hardware consisted... MSRP: Now: $16.96 Add to Cart Racelite Extra Heavy Duty Gudgeons Extra Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-490Extra heavy duty stainless steel gudgeon thickness - .090" plus reinforcing strap3/4" wide x 5-1/4" long x 1" highpin - 3/8"takes... MSRP: Now: $15.99 Add to Cart Ronstan Stainless Steel Gudgeons These gudgeons are used together or with pintles having 1/4" pins. You can use a pin in each set, as in the illustration or a single pin going through all four gudgeons.Parts sold individually or as complete set. Pins not included. You may want a 1/4" SS... MSRP: Was: Now: $16.40 - $79.99 Choose Options Racelite 1/2" Heavy Duty Gudgeons Takes 1/2" pintles There are two different gudgeons in this style - one two hole and one four hole - both take 1/2" pintles. Each gudgeon is actually composed of two parts as shown below. All parts are stainless steel.Typically the four hole gudgeon is... MSRP: Was: Now: $13.50 - $14.25 Choose Options Kayak Rudder Mounting Gudgeons If you want to install a Sea-Lect TruCourse Rudder on your boat and it does not have a standard mounting gudgeon, you will need the appropriate gudgeon. Study the photos and diagrams below to determine which model you need. Four different... MSRP: Was: Now: $17.75 - $19.30 Choose Options Racelite Medium Duty Gudgeons Medium duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-360 gudgeonMedium duty stainless steel gudgeon thickness - 5/64"3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons Rudders from 1/2" to 1-3/8" A set consists of two gudgeons and two pintles. The parts here are sold individually OR in sets. The parts sold individually are represented in the first chart below - you'll need to order two each of the rudder gudgeons and... MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-390 gudgeonHeavy duty stainless steel gudgeon thickness - 5/64" 3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon sold individually - mounting fasteners not included MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons These gudgeons have 1/2" diameter holes for pins. The gudgeons and tangs are formed from 1/8" thick stainless steel and are very robust. We do not have pintles that fit these gudgeons. RL-890 1-1/4" x 1-7/8" x 5-1/4"accepts 1/2" pin mounting holes... MSRP: Now: $24.95 Add to Cart Compare Selected × OK
Weekender Rudder Gudgeon These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They can also be used on a skeg where a regular gudgeon is used as the upper pivot point. Weekender Rudder... MSRP: Now: $18.97 Canoe/Kayak Rudder Gudgeons For sharply pointed sterns After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the problem of attaching rudders to canoes and kayaks. Use two of... MSRP: Was: Now: $8.62 - $18.28 Choose Options Racelite Light Duty Gudgeons See our pintle & gudgeon compatibility chart Light duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-358Light duty stainless steel gudgeon 5/8" x 4" x 1/16"pin - 5/16"takes #10 fastener MSRP: Now: $8.99 Add to Cart Racelite One Piece Gudgeons A one piece gudgeon ideal for small boats such as PDRacers. Pintle holes are 5/16" but could be drilled to 3/8".Feedback:I recently installed a Racelite 358BR gudgeon as a retrofit on my son's PDRacer (Hull #491). The original rudder hardware consisted... MSRP: Now: $16.96 Add to Cart Racelite Extra Heavy Duty Gudgeons Extra Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-490Extra heavy duty stainless steel gudgeon thickness - .090" plus reinforcing strap3/4" wide x 5-1/4" long x 1" highpin - 3/8"takes... MSRP: Now: $15.99 Add to Cart Ronstan Stainless Steel Gudgeons These gudgeons are used together or with pintles having 1/4" pins. You can use a pin in each set, as in the illustration or a single pin going through all four gudgeons.Parts sold individually or as complete set. Pins not included. You may want a 1/4" SS... MSRP: Was: Now: $16.40 - $79.99 Choose Options Racelite 1/2" Heavy Duty Gudgeons Takes 1/2" pintles There are two different gudgeons in this style - one two hole and one four hole - both take 1/2" pintles. Each gudgeon is actually composed of two parts as shown below. All parts are stainless steel.Typically the four hole gudgeon is... MSRP: Was: Now: $13.50 - $14.25 Choose Options Kayak Rudder Mounting Gudgeons If you want to install a Sea-Lect TruCourse Rudder on your boat and it does not have a standard mounting gudgeon, you will need the appropriate gudgeon. Study the photos and diagrams below to determine which model you need. Four different... MSRP: Was: Now: $17.75 - $19.30 Choose Options Racelite Medium Duty Gudgeons Medium duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-360 gudgeonMedium duty stainless steel gudgeon thickness - 5/64"3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons Rudders from 1/2" to 1-3/8" A set consists of two gudgeons and two pintles. The parts here are sold individually OR in sets. The parts sold individually are represented in the first chart below - you'll need to order two each of the rudder gudgeons and... MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-390 gudgeonHeavy duty stainless steel gudgeon thickness - 5/64" 3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon sold individually - mounting fasteners not included MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons These gudgeons have 1/2" diameter holes for pins. The gudgeons and tangs are formed from 1/8" thick stainless steel and are very robust. We do not have pintles that fit these gudgeons. RL-890 1-1/4" x 1-7/8" x 5-1/4"accepts 1/2" pin mounting holes... MSRP: Now: $24.95 Add to Cart Compare Selected × OK
Canoe/Kayak Rudder Gudgeons For sharply pointed sterns After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the problem of attaching rudders to canoes and kayaks. Use two of... MSRP: Was: Now: $8.62 - $18.28 Choose Options
Racelite Light Duty Gudgeons See our pintle & gudgeon compatibility chart Light duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-358Light duty stainless steel gudgeon 5/8" x 4" x 1/16"pin - 5/16"takes #10 fastener MSRP: Now: $8.99 Add to Cart Racelite One Piece Gudgeons A one piece gudgeon ideal for small boats such as PDRacers. Pintle holes are 5/16" but could be drilled to 3/8".Feedback:I recently installed a Racelite 358BR gudgeon as a retrofit on my son's PDRacer (Hull #491). The original rudder hardware consisted... MSRP: Now: $16.96 Add to Cart Racelite Extra Heavy Duty Gudgeons Extra Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-490Extra heavy duty stainless steel gudgeon thickness - .090" plus reinforcing strap3/4" wide x 5-1/4" long x 1" highpin - 3/8"takes... MSRP: Now: $15.99 Add to Cart Ronstan Stainless Steel Gudgeons These gudgeons are used together or with pintles having 1/4" pins. You can use a pin in each set, as in the illustration or a single pin going through all four gudgeons.Parts sold individually or as complete set. Pins not included. You may want a 1/4" SS... MSRP: Was: Now: $16.40 - $79.99 Choose Options Racelite 1/2" Heavy Duty Gudgeons Takes 1/2" pintles There are two different gudgeons in this style - one two hole and one four hole - both take 1/2" pintles. Each gudgeon is actually composed of two parts as shown below. All parts are stainless steel.Typically the four hole gudgeon is... MSRP: Was: Now: $13.50 - $14.25 Choose Options Kayak Rudder Mounting Gudgeons If you want to install a Sea-Lect TruCourse Rudder on your boat and it does not have a standard mounting gudgeon, you will need the appropriate gudgeon. Study the photos and diagrams below to determine which model you need. Four different... MSRP: Was: Now: $17.75 - $19.30 Choose Options Racelite Medium Duty Gudgeons Medium duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-360 gudgeonMedium duty stainless steel gudgeon thickness - 5/64"3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons Rudders from 1/2" to 1-3/8" A set consists of two gudgeons and two pintles. The parts here are sold individually OR in sets. The parts sold individually are represented in the first chart below - you'll need to order two each of the rudder gudgeons and... MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-390 gudgeonHeavy duty stainless steel gudgeon thickness - 5/64" 3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon sold individually - mounting fasteners not included MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons These gudgeons have 1/2" diameter holes for pins. The gudgeons and tangs are formed from 1/8" thick stainless steel and are very robust. We do not have pintles that fit these gudgeons. RL-890 1-1/4" x 1-7/8" x 5-1/4"accepts 1/2" pin mounting holes... MSRP: Now: $24.95 Add to Cart Compare Selected × OK
Racelite One Piece Gudgeons A one piece gudgeon ideal for small boats such as PDRacers. Pintle holes are 5/16" but could be drilled to 3/8".Feedback:I recently installed a Racelite 358BR gudgeon as a retrofit on my son's PDRacer (Hull #491). The original rudder hardware consisted... MSRP: Now: $16.96 Add to Cart Racelite Extra Heavy Duty Gudgeons Extra Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-490Extra heavy duty stainless steel gudgeon thickness - .090" plus reinforcing strap3/4" wide x 5-1/4" long x 1" highpin - 3/8"takes... MSRP: Now: $15.99 Add to Cart Ronstan Stainless Steel Gudgeons These gudgeons are used together or with pintles having 1/4" pins. You can use a pin in each set, as in the illustration or a single pin going through all four gudgeons.Parts sold individually or as complete set. Pins not included. You may want a 1/4" SS... MSRP: Was: Now: $16.40 - $79.99 Choose Options Racelite 1/2" Heavy Duty Gudgeons Takes 1/2" pintles There are two different gudgeons in this style - one two hole and one four hole - both take 1/2" pintles. Each gudgeon is actually composed of two parts as shown below. All parts are stainless steel.Typically the four hole gudgeon is... MSRP: Was: Now: $13.50 - $14.25 Choose Options Kayak Rudder Mounting Gudgeons If you want to install a Sea-Lect TruCourse Rudder on your boat and it does not have a standard mounting gudgeon, you will need the appropriate gudgeon. Study the photos and diagrams below to determine which model you need. Four different... MSRP: Was: Now: $17.75 - $19.30 Choose Options Racelite Medium Duty Gudgeons Medium duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-360 gudgeonMedium duty stainless steel gudgeon thickness - 5/64"3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons Rudders from 1/2" to 1-3/8" A set consists of two gudgeons and two pintles. The parts here are sold individually OR in sets. The parts sold individually are represented in the first chart below - you'll need to order two each of the rudder gudgeons and... MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-390 gudgeonHeavy duty stainless steel gudgeon thickness - 5/64" 3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon sold individually - mounting fasteners not included MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons These gudgeons have 1/2" diameter holes for pins. The gudgeons and tangs are formed from 1/8" thick stainless steel and are very robust. We do not have pintles that fit these gudgeons. RL-890 1-1/4" x 1-7/8" x 5-1/4"accepts 1/2" pin mounting holes... MSRP: Now: $24.95 Add to Cart Compare Selected × OK
Racelite Extra Heavy Duty Gudgeons Extra Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-490Extra heavy duty stainless steel gudgeon thickness - .090" plus reinforcing strap3/4" wide x 5-1/4" long x 1" highpin - 3/8"takes... MSRP: Now: $15.99 Add to Cart Ronstan Stainless Steel Gudgeons These gudgeons are used together or with pintles having 1/4" pins. You can use a pin in each set, as in the illustration or a single pin going through all four gudgeons.Parts sold individually or as complete set. Pins not included. You may want a 1/4" SS... MSRP: Was: Now: $16.40 - $79.99 Choose Options Racelite 1/2" Heavy Duty Gudgeons Takes 1/2" pintles There are two different gudgeons in this style - one two hole and one four hole - both take 1/2" pintles. Each gudgeon is actually composed of two parts as shown below. All parts are stainless steel.Typically the four hole gudgeon is... MSRP: Was: Now: $13.50 - $14.25 Choose Options Kayak Rudder Mounting Gudgeons If you want to install a Sea-Lect TruCourse Rudder on your boat and it does not have a standard mounting gudgeon, you will need the appropriate gudgeon. Study the photos and diagrams below to determine which model you need. Four different... MSRP: Was: Now: $17.75 - $19.30 Choose Options Racelite Medium Duty Gudgeons Medium duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-360 gudgeonMedium duty stainless steel gudgeon thickness - 5/64"3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons Rudders from 1/2" to 1-3/8" A set consists of two gudgeons and two pintles. The parts here are sold individually OR in sets. The parts sold individually are represented in the first chart below - you'll need to order two each of the rudder gudgeons and... MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-390 gudgeonHeavy duty stainless steel gudgeon thickness - 5/64" 3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon sold individually - mounting fasteners not included MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons These gudgeons have 1/2" diameter holes for pins. The gudgeons and tangs are formed from 1/8" thick stainless steel and are very robust. We do not have pintles that fit these gudgeons. RL-890 1-1/4" x 1-7/8" x 5-1/4"accepts 1/2" pin mounting holes... MSRP: Now: $24.95 Add to Cart Compare Selected × OK
Ronstan Stainless Steel Gudgeons These gudgeons are used together or with pintles having 1/4" pins. You can use a pin in each set, as in the illustration or a single pin going through all four gudgeons.Parts sold individually or as complete set. Pins not included. You may want a 1/4" SS... MSRP: Was: Now: $16.40 - $79.99 Choose Options
Racelite 1/2" Heavy Duty Gudgeons Takes 1/2" pintles There are two different gudgeons in this style - one two hole and one four hole - both take 1/2" pintles. Each gudgeon is actually composed of two parts as shown below. All parts are stainless steel.Typically the four hole gudgeon is... MSRP: Was: Now: $13.50 - $14.25 Choose Options
Kayak Rudder Mounting Gudgeons If you want to install a Sea-Lect TruCourse Rudder on your boat and it does not have a standard mounting gudgeon, you will need the appropriate gudgeon. Study the photos and diagrams below to determine which model you need. Four different... MSRP: Was: Now: $17.75 - $19.30 Choose Options
Racelite Medium Duty Gudgeons Medium duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-360 gudgeonMedium duty stainless steel gudgeon thickness - 5/64"3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $9.99 Add to Cart Viadana Transom Pintles and Rudder Gudgeons Rudders from 1/2" to 1-3/8" A set consists of two gudgeons and two pintles. The parts here are sold individually OR in sets. The parts sold individually are represented in the first chart below - you'll need to order two each of the rudder gudgeons and... MSRP: Was: Now: $9.74 - $51.00 Choose Options Racelite Heavy Duty Gudgeons Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-390 gudgeonHeavy duty stainless steel gudgeon thickness - 5/64" 3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon sold individually - mounting fasteners not included MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons These gudgeons have 1/2" diameter holes for pins. The gudgeons and tangs are formed from 1/8" thick stainless steel and are very robust. We do not have pintles that fit these gudgeons. RL-890 1-1/4" x 1-7/8" x 5-1/4"accepts 1/2" pin mounting holes... MSRP: Now: $24.95 Add to Cart Compare Selected × OK
Viadana Transom Pintles and Rudder Gudgeons Rudders from 1/2" to 1-3/8" A set consists of two gudgeons and two pintles. The parts here are sold individually OR in sets. The parts sold individually are represented in the first chart below - you'll need to order two each of the rudder gudgeons and... MSRP: Was: Now: $9.74 - $51.00 Choose Options
Racelite Heavy Duty Gudgeons Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. See our pintle & gudgeon compatibility chart RL-390 gudgeonHeavy duty stainless steel gudgeon thickness - 5/64" 3/4" x 3-3/4" pin - 3/8"takes #10... MSRP: Now: $10.99 Add to Cart Factory West Wight Potter 15 and 19 Gudgeon sold individually - mounting fasteners not included MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons These gudgeons have 1/2" diameter holes for pins. The gudgeons and tangs are formed from 1/8" thick stainless steel and are very robust. We do not have pintles that fit these gudgeons. RL-890 1-1/4" x 1-7/8" x 5-1/4"accepts 1/2" pin mounting holes... MSRP: Now: $24.95 Add to Cart Compare Selected × OK
Factory West Wight Potter 15 and 19 Gudgeon sold individually - mounting fasteners not included MSRP: Now: $21.95 Add to Cart Extra Heavy Duty 1/2" Gudgeons These gudgeons have 1/2" diameter holes for pins. The gudgeons and tangs are formed from 1/8" thick stainless steel and are very robust. We do not have pintles that fit these gudgeons. RL-890 1-1/4" x 1-7/8" x 5-1/4"accepts 1/2" pin mounting holes... MSRP: Now: $24.95 Add to Cart Compare Selected × OK
Extra Heavy Duty 1/2" Gudgeons These gudgeons have 1/2" diameter holes for pins. The gudgeons and tangs are formed from 1/8" thick stainless steel and are very robust. We do not have pintles that fit these gudgeons. RL-890 1-1/4" x 1-7/8" x 5-1/4"accepts 1/2" pin mounting holes... MSRP: Now: $24.95 Add to Cart Compare Selected