Misc.

Seadog Nylon Flange Type Screw-in Drain Plug

These Drain Plugs are designed with a molded-in recess in the base, thus trapping the sealant in place and providing a more water-tight seal. They also have a captive mechanism that keeps the plug in the body but still allows easy removal of the plug...

Sealect Heavy Duty Double Hole Lashing Hook

These heavy duty injection molded Nylon hooks are attached to a deck to retain a piece of shock cord used to hold down various loose pieces of gear.PartABCDEK6714157/8"5/8"15/16"1-3/16"9/16"

SeaLect Nylon Pop-Rivet Mount Pad Eye

K081350A3/8in.B1/2 in.C1-3/8 in.Weight.01 lb.

Sea-Lect Nylon Lashing Hooks

Injection molded Nylon Two Hole: Part A B C D E Fastener SD-671421 7/8" 3/8" 1/2" 3/4" 5/8" #6RH One Hole: Part A B C D Fastener SD-671425 15/16" 7/16" 7/16" 5/8" #6RH

Sea-Lect Kayak Shock Cord Deck Fittings

Injection Molded Polypropylene Fiberglass/Nylon These parts are used to manage shock cord on the decks of kayaks.Dimensions and specifics below Round Line Guide - K736530 A= 1.5" - B= 3/8"   Bungy Block -...

Seadog Replacement Drain Plug

Replacement plug for SD-520010, SD-520020, and SD-520030

SeaLect Stainless Pop-Rivet Mount Pad Eye

The fastener pads are flat topped to accept 3/16" pop rivets or pan head screws.316 Stainless Steel K081850A11/32 in.B11/32 in.C1-1/16 in.Fastener3/16" Pop RivetWeight.02 lb.

SeaLect Stainless Hammock Hooks

These stainless hooks are attached to a deck to retain a piece of shock cord used to hold down various loose pieces of gear. The picture below shows an example. Part A B C D E SD-671460 15/16" 3/4" 1/2" 1-1/4" 1/2"

Seadog Nylon Flange Type Screw-in Drain Plug 1

These Drain Plugs are designed with a molded-in recess in the base, thus trapping the sealant in place and providing a more water-tight seal. They also have a captive mechanism that keeps the plug in the body but still allows easy removal of the plug...

Sea-Lect Single and Double Loop Deck Fittings

For kayak deck applications especially for arranging bungy cords to retain gear. K736550 - Single Loop K736560 - Double Loop Part A B Fastener K736550 1-1/4" 1/2" #10 OH K736560 1-5/8" 1/2" #10 OH

SeaLect Kayak Manual Bilge Pump

Essential safety equipment, this high quality pump is great for Kayaks, and all small boats with sides less than 16 inches high. Part# A SPG GPM K737500 21" 10 6

Sea-Lect Webbing Handles w/caps

Molded Nylon/Webbing Outfit your kayak with the SEA-LECT Designs Webbing Handle w/ Caps made from heavy duty webbing with a rubber cover; Remember...a wet and slippery kayak is much easier to handle, with a handle! ...

SeaLect HDPE Drain Tube

This drain tube consists of two pieces, a tube with a flange on one end and another end piece with a flange. The end piece fits over the tube with a friction fit. The tube can be cut off to accommodate any thicknesss from 3/4 to 2-1/2 inches.Designed to...

SeaLect Tapered Scupper Plug

This stopper is designed for use with the SeaLect HDPE drain tube. Cat No. A B C D K520113 15/16" 3/4" 1" 2-1/2"

Seadog Nylon Press Fit Screw-in Drain Plug

These Nylon drain plugs are designed to fit securely in a 1" hole without the use of fasteners. The ridges on the body of the Drain Plug are designed to keep the plug in place. Sealant should be applied prior to installation to make a watertight seal...