Composite Fasteners

RAPTOR® nails are not susceptible to the corrosion and oxidation that attacks metal, so your manufactured product retains its beautiful new appearance. RAPTOR® nails and staples can be sanded and sawed without tool damage, so you will not need to...

One of the required tools for Raptor 19 Gauge Composite Staples The 81P series pneumatic staplers drive RAPTOR® 19 gauge composite staples from 1/4" through 9/16". They are extremely fast, lightweight, well balanced and rugged. They are...

Recommended Tool for Raptor 18 Gauge Composite Brads The Omer 12P.25 Brad Nailer drives the full range of Raptor® B/18 18 gauge plastic brad nails from 7/16" (11mm) through 1" (25mm) lengths. The narrow nose allows for superior nail placement in hard...

Recommended Tool for Raptor 18 Gauge Composite Brads The 12.20P brad nailer drives Raptor 18 gauge composite brads from 7/16" through 3/4" in length. Model OMER 12.20P Fastener range 7/16"; 5/8"; 3/4" (11; 16; 20mm) Magazine capacity 100...

(1/2" Crown - boxes of 5040) Raptor 19 gauge composite staples have a lot of uses around the boat shop. For instance securing scarphs on small timbers while the epoxy kicks. I was scarphing some staves for a birdsmouth mast when rather than use the usual...

RAPTOR® nails are not susceptible to the corrosion and oxidation that attacks metal, so your manufactured product retains its beautiful new appearance. RAPTOR® nails and staples can be sanded and sawed without tool damage, so you will not need to...

Recommended Tool for Raptor 15 Gauge Composite Nails The B17P.763 Finish Nailer drives RAPTOR® 15 gauge composite finish nails from 1/2" up to 2" lengths. It's magnesium body provides extreme power with an outstanding power-to-weight ratio...