Q-Lokâ„¢ MSRP: Now: $3.56 Add to Cart Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Ronstan V-Jammer MSRP: Now: $16.41 Add to Cart Seadog Halyard Cleat MSRP: Now: $6.96 Add to Cart Seadog Zig Zag Cleat MSRP: Now: $3.85 Add to Cart Viadana Inox JamCleat MSRP: Now: $1.46 Add to Cart 5/16" (8mm) Ronstan Small Mainsheet Swivel Cleat Base MSRP: Now: $85.02 Add to Cart Clamcleat Line-Lokâ„¢ Cleats Easy to tension, easy to release even when wearing thick gloves. Grips the line to resist being shaken loose-even in extreme conditions. Two sizes hold a wide variety of ropes - from 0 to 5mm (0" to 3/16"). Patented toothform holds high loads without... MSRP: Was: Now: $0.62 - $5.98 Choose Options Q-Lokâ„¢ Developed by Dave Shuster, the Q-Lok™ is ideal for easy rigging and de-rigging of cunninghams. Knots can also be tied in the rope in different positions, so it is easy to rig to your favoured settings. Manufactured from 316 Stainless steel the Q-lok™... MSRP: Now: $3.56 Add to Cart Racelite Stainless Jam Cleat Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Narrow 5/8" base. 3-1/4" long. Takes #10 screws. MSRP: Now: $4.68 Add to Cart Ronstan V-Jammer Features65mm (2 1/2") long.18mm (11/16") wide.4mm (5/32) mounting holes.Typically used on dinghies, catamarans and small keelboatsGrade 316 stainless steelHere is a view of the cleat from the front showing the fairlead or guide: MSRP: Now: $16.41 Add to Cart Seadog Halyard Cleat Nylon construction with stainless steel mounting plate. Designed to mount on any 3/16" - 5/16" diameter shroud and used for tying off a halyard when not in use. Additional uses include mounting attachments for flags, solar showers, awnings, topping lift... MSRP: Now: $6.96 Add to Cart Seadog Zig Zag Cleat Simply weave rope around cleat arms, no knots needed. Great for fender lines, trailer covers and utility lines. Fits line up to 3/8".Part#ABCDFastenerSD-0435403-1/2"15/16"1-15/16"1-3/4"1/4FH MSRP: Now: $3.85 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.46 Add to Cart 5/16" (8mm) Ronstan Small Mainsheet Swivel Cleat Base FEATURES Ball bearings support the cleat arm. An integral stop prevents over rotation, but can be removed to allow full 360° rotation. The cleating angle can be set in one of two positions - use the included riser kit for a higher cleating angle. A... MSRP: Now: $85.02 Add to Cart Compare Selected ×
Racelite Stainless Jam Cleat MSRP: Now: $4.68 Add to Cart Ronstan V-Jammer MSRP: Now: $16.41 Add to Cart Seadog Halyard Cleat MSRP: Now: $6.96 Add to Cart Seadog Zig Zag Cleat MSRP: Now: $3.85 Add to Cart Viadana Inox JamCleat MSRP: Now: $1.46 Add to Cart 5/16" (8mm) Ronstan Small Mainsheet Swivel Cleat Base MSRP: Now: $85.02 Add to Cart Clamcleat Line-Lokâ„¢ Cleats Easy to tension, easy to release even when wearing thick gloves. Grips the line to resist being shaken loose-even in extreme conditions. Two sizes hold a wide variety of ropes - from 0 to 5mm (0" to 3/16"). Patented toothform holds high loads without... MSRP: Was: Now: $0.62 - $5.98 Choose Options Q-Lokâ„¢ Developed by Dave Shuster, the Q-Lok™ is ideal for easy rigging and de-rigging of cunninghams. Knots can also be tied in the rope in different positions, so it is easy to rig to your favoured settings. Manufactured from 316 Stainless steel the Q-lok™... MSRP: Now: $3.56 Add to Cart Racelite Stainless Jam Cleat Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Narrow 5/8" base. 3-1/4" long. Takes #10 screws. MSRP: Now: $4.68 Add to Cart Ronstan V-Jammer Features65mm (2 1/2") long.18mm (11/16") wide.4mm (5/32) mounting holes.Typically used on dinghies, catamarans and small keelboatsGrade 316 stainless steelHere is a view of the cleat from the front showing the fairlead or guide: MSRP: Now: $16.41 Add to Cart Seadog Halyard Cleat Nylon construction with stainless steel mounting plate. Designed to mount on any 3/16" - 5/16" diameter shroud and used for tying off a halyard when not in use. Additional uses include mounting attachments for flags, solar showers, awnings, topping lift... MSRP: Now: $6.96 Add to Cart Seadog Zig Zag Cleat Simply weave rope around cleat arms, no knots needed. Great for fender lines, trailer covers and utility lines. Fits line up to 3/8".Part#ABCDFastenerSD-0435403-1/2"15/16"1-15/16"1-3/4"1/4FH MSRP: Now: $3.85 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.46 Add to Cart 5/16" (8mm) Ronstan Small Mainsheet Swivel Cleat Base FEATURES Ball bearings support the cleat arm. An integral stop prevents over rotation, but can be removed to allow full 360° rotation. The cleating angle can be set in one of two positions - use the included riser kit for a higher cleating angle. A... MSRP: Now: $85.02 Add to Cart Compare Selected ×
Ronstan V-Jammer MSRP: Now: $16.41 Add to Cart Seadog Halyard Cleat MSRP: Now: $6.96 Add to Cart Seadog Zig Zag Cleat MSRP: Now: $3.85 Add to Cart Viadana Inox JamCleat MSRP: Now: $1.46 Add to Cart 5/16" (8mm) Ronstan Small Mainsheet Swivel Cleat Base MSRP: Now: $85.02 Add to Cart Clamcleat Line-Lokâ„¢ Cleats Easy to tension, easy to release even when wearing thick gloves. Grips the line to resist being shaken loose-even in extreme conditions. Two sizes hold a wide variety of ropes - from 0 to 5mm (0" to 3/16"). Patented toothform holds high loads without... MSRP: Was: Now: $0.62 - $5.98 Choose Options Q-Lokâ„¢ Developed by Dave Shuster, the Q-Lok™ is ideal for easy rigging and de-rigging of cunninghams. Knots can also be tied in the rope in different positions, so it is easy to rig to your favoured settings. Manufactured from 316 Stainless steel the Q-lok™... MSRP: Now: $3.56 Add to Cart Racelite Stainless Jam Cleat Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Narrow 5/8" base. 3-1/4" long. Takes #10 screws. MSRP: Now: $4.68 Add to Cart Ronstan V-Jammer Features65mm (2 1/2") long.18mm (11/16") wide.4mm (5/32) mounting holes.Typically used on dinghies, catamarans and small keelboatsGrade 316 stainless steelHere is a view of the cleat from the front showing the fairlead or guide: MSRP: Now: $16.41 Add to Cart Seadog Halyard Cleat Nylon construction with stainless steel mounting plate. Designed to mount on any 3/16" - 5/16" diameter shroud and used for tying off a halyard when not in use. Additional uses include mounting attachments for flags, solar showers, awnings, topping lift... MSRP: Now: $6.96 Add to Cart Seadog Zig Zag Cleat Simply weave rope around cleat arms, no knots needed. Great for fender lines, trailer covers and utility lines. Fits line up to 3/8".Part#ABCDFastenerSD-0435403-1/2"15/16"1-15/16"1-3/4"1/4FH MSRP: Now: $3.85 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.46 Add to Cart 5/16" (8mm) Ronstan Small Mainsheet Swivel Cleat Base FEATURES Ball bearings support the cleat arm. An integral stop prevents over rotation, but can be removed to allow full 360° rotation. The cleating angle can be set in one of two positions - use the included riser kit for a higher cleating angle. A... MSRP: Now: $85.02 Add to Cart Compare Selected ×
Seadog Halyard Cleat MSRP: Now: $6.96 Add to Cart Seadog Zig Zag Cleat MSRP: Now: $3.85 Add to Cart Viadana Inox JamCleat MSRP: Now: $1.46 Add to Cart 5/16" (8mm) Ronstan Small Mainsheet Swivel Cleat Base MSRP: Now: $85.02 Add to Cart Clamcleat Line-Lokâ„¢ Cleats Easy to tension, easy to release even when wearing thick gloves. Grips the line to resist being shaken loose-even in extreme conditions. Two sizes hold a wide variety of ropes - from 0 to 5mm (0" to 3/16"). Patented toothform holds high loads without... MSRP: Was: Now: $0.62 - $5.98 Choose Options Q-Lokâ„¢ Developed by Dave Shuster, the Q-Lok™ is ideal for easy rigging and de-rigging of cunninghams. Knots can also be tied in the rope in different positions, so it is easy to rig to your favoured settings. Manufactured from 316 Stainless steel the Q-lok™... MSRP: Now: $3.56 Add to Cart Racelite Stainless Jam Cleat Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Narrow 5/8" base. 3-1/4" long. Takes #10 screws. MSRP: Now: $4.68 Add to Cart Ronstan V-Jammer Features65mm (2 1/2") long.18mm (11/16") wide.4mm (5/32) mounting holes.Typically used on dinghies, catamarans and small keelboatsGrade 316 stainless steelHere is a view of the cleat from the front showing the fairlead or guide: MSRP: Now: $16.41 Add to Cart Seadog Halyard Cleat Nylon construction with stainless steel mounting plate. Designed to mount on any 3/16" - 5/16" diameter shroud and used for tying off a halyard when not in use. Additional uses include mounting attachments for flags, solar showers, awnings, topping lift... MSRP: Now: $6.96 Add to Cart Seadog Zig Zag Cleat Simply weave rope around cleat arms, no knots needed. Great for fender lines, trailer covers and utility lines. Fits line up to 3/8".Part#ABCDFastenerSD-0435403-1/2"15/16"1-15/16"1-3/4"1/4FH MSRP: Now: $3.85 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.46 Add to Cart 5/16" (8mm) Ronstan Small Mainsheet Swivel Cleat Base FEATURES Ball bearings support the cleat arm. An integral stop prevents over rotation, but can be removed to allow full 360° rotation. The cleating angle can be set in one of two positions - use the included riser kit for a higher cleating angle. A... MSRP: Now: $85.02 Add to Cart Compare Selected ×
Seadog Zig Zag Cleat MSRP: Now: $3.85 Add to Cart Viadana Inox JamCleat MSRP: Now: $1.46 Add to Cart 5/16" (8mm) Ronstan Small Mainsheet Swivel Cleat Base MSRP: Now: $85.02 Add to Cart Clamcleat Line-Lokâ„¢ Cleats Easy to tension, easy to release even when wearing thick gloves. Grips the line to resist being shaken loose-even in extreme conditions. Two sizes hold a wide variety of ropes - from 0 to 5mm (0" to 3/16"). Patented toothform holds high loads without... MSRP: Was: Now: $0.62 - $5.98 Choose Options Q-Lokâ„¢ Developed by Dave Shuster, the Q-Lok™ is ideal for easy rigging and de-rigging of cunninghams. Knots can also be tied in the rope in different positions, so it is easy to rig to your favoured settings. Manufactured from 316 Stainless steel the Q-lok™... MSRP: Now: $3.56 Add to Cart Racelite Stainless Jam Cleat Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Narrow 5/8" base. 3-1/4" long. Takes #10 screws. MSRP: Now: $4.68 Add to Cart Ronstan V-Jammer Features65mm (2 1/2") long.18mm (11/16") wide.4mm (5/32) mounting holes.Typically used on dinghies, catamarans and small keelboatsGrade 316 stainless steelHere is a view of the cleat from the front showing the fairlead or guide: MSRP: Now: $16.41 Add to Cart Seadog Halyard Cleat Nylon construction with stainless steel mounting plate. Designed to mount on any 3/16" - 5/16" diameter shroud and used for tying off a halyard when not in use. Additional uses include mounting attachments for flags, solar showers, awnings, topping lift... MSRP: Now: $6.96 Add to Cart Seadog Zig Zag Cleat Simply weave rope around cleat arms, no knots needed. Great for fender lines, trailer covers and utility lines. Fits line up to 3/8".Part#ABCDFastenerSD-0435403-1/2"15/16"1-15/16"1-3/4"1/4FH MSRP: Now: $3.85 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.46 Add to Cart 5/16" (8mm) Ronstan Small Mainsheet Swivel Cleat Base FEATURES Ball bearings support the cleat arm. An integral stop prevents over rotation, but can be removed to allow full 360° rotation. The cleating angle can be set in one of two positions - use the included riser kit for a higher cleating angle. A... MSRP: Now: $85.02 Add to Cart Compare Selected ×
Viadana Inox JamCleat MSRP: Now: $1.46 Add to Cart 5/16" (8mm) Ronstan Small Mainsheet Swivel Cleat Base MSRP: Now: $85.02 Add to Cart Clamcleat Line-Lokâ„¢ Cleats Easy to tension, easy to release even when wearing thick gloves. Grips the line to resist being shaken loose-even in extreme conditions. Two sizes hold a wide variety of ropes - from 0 to 5mm (0" to 3/16"). Patented toothform holds high loads without... MSRP: Was: Now: $0.62 - $5.98 Choose Options Q-Lokâ„¢ Developed by Dave Shuster, the Q-Lok™ is ideal for easy rigging and de-rigging of cunninghams. Knots can also be tied in the rope in different positions, so it is easy to rig to your favoured settings. Manufactured from 316 Stainless steel the Q-lok™... MSRP: Now: $3.56 Add to Cart Racelite Stainless Jam Cleat Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Narrow 5/8" base. 3-1/4" long. Takes #10 screws. MSRP: Now: $4.68 Add to Cart Ronstan V-Jammer Features65mm (2 1/2") long.18mm (11/16") wide.4mm (5/32) mounting holes.Typically used on dinghies, catamarans and small keelboatsGrade 316 stainless steelHere is a view of the cleat from the front showing the fairlead or guide: MSRP: Now: $16.41 Add to Cart Seadog Halyard Cleat Nylon construction with stainless steel mounting plate. Designed to mount on any 3/16" - 5/16" diameter shroud and used for tying off a halyard when not in use. Additional uses include mounting attachments for flags, solar showers, awnings, topping lift... MSRP: Now: $6.96 Add to Cart Seadog Zig Zag Cleat Simply weave rope around cleat arms, no knots needed. Great for fender lines, trailer covers and utility lines. Fits line up to 3/8".Part#ABCDFastenerSD-0435403-1/2"15/16"1-15/16"1-3/4"1/4FH MSRP: Now: $3.85 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.46 Add to Cart 5/16" (8mm) Ronstan Small Mainsheet Swivel Cleat Base FEATURES Ball bearings support the cleat arm. An integral stop prevents over rotation, but can be removed to allow full 360° rotation. The cleating angle can be set in one of two positions - use the included riser kit for a higher cleating angle. A... MSRP: Now: $85.02 Add to Cart Compare Selected ×
5/16" (8mm) Ronstan Small Mainsheet Swivel Cleat Base MSRP: Now: $85.02 Add to Cart Clamcleat Line-Lokâ„¢ Cleats Easy to tension, easy to release even when wearing thick gloves. Grips the line to resist being shaken loose-even in extreme conditions. Two sizes hold a wide variety of ropes - from 0 to 5mm (0" to 3/16"). Patented toothform holds high loads without... MSRP: Was: Now: $0.62 - $5.98 Choose Options Q-Lokâ„¢ Developed by Dave Shuster, the Q-Lok™ is ideal for easy rigging and de-rigging of cunninghams. Knots can also be tied in the rope in different positions, so it is easy to rig to your favoured settings. Manufactured from 316 Stainless steel the Q-lok™... MSRP: Now: $3.56 Add to Cart Racelite Stainless Jam Cleat Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Narrow 5/8" base. 3-1/4" long. Takes #10 screws. MSRP: Now: $4.68 Add to Cart Ronstan V-Jammer Features65mm (2 1/2") long.18mm (11/16") wide.4mm (5/32) mounting holes.Typically used on dinghies, catamarans and small keelboatsGrade 316 stainless steelHere is a view of the cleat from the front showing the fairlead or guide: MSRP: Now: $16.41 Add to Cart Seadog Halyard Cleat Nylon construction with stainless steel mounting plate. Designed to mount on any 3/16" - 5/16" diameter shroud and used for tying off a halyard when not in use. Additional uses include mounting attachments for flags, solar showers, awnings, topping lift... MSRP: Now: $6.96 Add to Cart Seadog Zig Zag Cleat Simply weave rope around cleat arms, no knots needed. Great for fender lines, trailer covers and utility lines. Fits line up to 3/8".Part#ABCDFastenerSD-0435403-1/2"15/16"1-15/16"1-3/4"1/4FH MSRP: Now: $3.85 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.46 Add to Cart 5/16" (8mm) Ronstan Small Mainsheet Swivel Cleat Base FEATURES Ball bearings support the cleat arm. An integral stop prevents over rotation, but can be removed to allow full 360° rotation. The cleating angle can be set in one of two positions - use the included riser kit for a higher cleating angle. A... MSRP: Now: $85.02 Add to Cart Compare Selected ×
Clamcleat Line-Lokâ„¢ Cleats Easy to tension, easy to release even when wearing thick gloves. Grips the line to resist being shaken loose-even in extreme conditions. Two sizes hold a wide variety of ropes - from 0 to 5mm (0" to 3/16"). Patented toothform holds high loads without... MSRP: Was: Now: $0.62 - $5.98 Choose Options
Q-Lokâ„¢ Developed by Dave Shuster, the Q-Lok™ is ideal for easy rigging and de-rigging of cunninghams. Knots can also be tied in the rope in different positions, so it is easy to rig to your favoured settings. Manufactured from 316 Stainless steel the Q-lok™... MSRP: Now: $3.56 Add to Cart Racelite Stainless Jam Cleat Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Narrow 5/8" base. 3-1/4" long. Takes #10 screws. MSRP: Now: $4.68 Add to Cart Ronstan V-Jammer Features65mm (2 1/2") long.18mm (11/16") wide.4mm (5/32) mounting holes.Typically used on dinghies, catamarans and small keelboatsGrade 316 stainless steelHere is a view of the cleat from the front showing the fairlead or guide: MSRP: Now: $16.41 Add to Cart Seadog Halyard Cleat Nylon construction with stainless steel mounting plate. Designed to mount on any 3/16" - 5/16" diameter shroud and used for tying off a halyard when not in use. Additional uses include mounting attachments for flags, solar showers, awnings, topping lift... MSRP: Now: $6.96 Add to Cart Seadog Zig Zag Cleat Simply weave rope around cleat arms, no knots needed. Great for fender lines, trailer covers and utility lines. Fits line up to 3/8".Part#ABCDFastenerSD-0435403-1/2"15/16"1-15/16"1-3/4"1/4FH MSRP: Now: $3.85 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.46 Add to Cart 5/16" (8mm) Ronstan Small Mainsheet Swivel Cleat Base FEATURES Ball bearings support the cleat arm. An integral stop prevents over rotation, but can be removed to allow full 360° rotation. The cleating angle can be set in one of two positions - use the included riser kit for a higher cleating angle. A... MSRP: Now: $85.02 Add to Cart Compare Selected ×
Racelite Stainless Jam Cleat Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Narrow 5/8" base. 3-1/4" long. Takes #10 screws. MSRP: Now: $4.68 Add to Cart Ronstan V-Jammer Features65mm (2 1/2") long.18mm (11/16") wide.4mm (5/32) mounting holes.Typically used on dinghies, catamarans and small keelboatsGrade 316 stainless steelHere is a view of the cleat from the front showing the fairlead or guide: MSRP: Now: $16.41 Add to Cart Seadog Halyard Cleat Nylon construction with stainless steel mounting plate. Designed to mount on any 3/16" - 5/16" diameter shroud and used for tying off a halyard when not in use. Additional uses include mounting attachments for flags, solar showers, awnings, topping lift... MSRP: Now: $6.96 Add to Cart Seadog Zig Zag Cleat Simply weave rope around cleat arms, no knots needed. Great for fender lines, trailer covers and utility lines. Fits line up to 3/8".Part#ABCDFastenerSD-0435403-1/2"15/16"1-15/16"1-3/4"1/4FH MSRP: Now: $3.85 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.46 Add to Cart 5/16" (8mm) Ronstan Small Mainsheet Swivel Cleat Base FEATURES Ball bearings support the cleat arm. An integral stop prevents over rotation, but can be removed to allow full 360° rotation. The cleating angle can be set in one of two positions - use the included riser kit for a higher cleating angle. A... MSRP: Now: $85.02 Add to Cart Compare Selected ×
Ronstan V-Jammer Features65mm (2 1/2") long.18mm (11/16") wide.4mm (5/32) mounting holes.Typically used on dinghies, catamarans and small keelboatsGrade 316 stainless steelHere is a view of the cleat from the front showing the fairlead or guide: MSRP: Now: $16.41 Add to Cart Seadog Halyard Cleat Nylon construction with stainless steel mounting plate. Designed to mount on any 3/16" - 5/16" diameter shroud and used for tying off a halyard when not in use. Additional uses include mounting attachments for flags, solar showers, awnings, topping lift... MSRP: Now: $6.96 Add to Cart Seadog Zig Zag Cleat Simply weave rope around cleat arms, no knots needed. Great for fender lines, trailer covers and utility lines. Fits line up to 3/8".Part#ABCDFastenerSD-0435403-1/2"15/16"1-15/16"1-3/4"1/4FH MSRP: Now: $3.85 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.46 Add to Cart 5/16" (8mm) Ronstan Small Mainsheet Swivel Cleat Base FEATURES Ball bearings support the cleat arm. An integral stop prevents over rotation, but can be removed to allow full 360° rotation. The cleating angle can be set in one of two positions - use the included riser kit for a higher cleating angle. A... MSRP: Now: $85.02 Add to Cart Compare Selected ×
Seadog Halyard Cleat Nylon construction with stainless steel mounting plate. Designed to mount on any 3/16" - 5/16" diameter shroud and used for tying off a halyard when not in use. Additional uses include mounting attachments for flags, solar showers, awnings, topping lift... MSRP: Now: $6.96 Add to Cart Seadog Zig Zag Cleat Simply weave rope around cleat arms, no knots needed. Great for fender lines, trailer covers and utility lines. Fits line up to 3/8".Part#ABCDFastenerSD-0435403-1/2"15/16"1-15/16"1-3/4"1/4FH MSRP: Now: $3.85 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.46 Add to Cart 5/16" (8mm) Ronstan Small Mainsheet Swivel Cleat Base FEATURES Ball bearings support the cleat arm. An integral stop prevents over rotation, but can be removed to allow full 360° rotation. The cleating angle can be set in one of two positions - use the included riser kit for a higher cleating angle. A... MSRP: Now: $85.02 Add to Cart Compare Selected ×
Seadog Zig Zag Cleat Simply weave rope around cleat arms, no knots needed. Great for fender lines, trailer covers and utility lines. Fits line up to 3/8".Part#ABCDFastenerSD-0435403-1/2"15/16"1-15/16"1-3/4"1/4FH MSRP: Now: $3.85 Add to Cart Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.46 Add to Cart 5/16" (8mm) Ronstan Small Mainsheet Swivel Cleat Base FEATURES Ball bearings support the cleat arm. An integral stop prevents over rotation, but can be removed to allow full 360° rotation. The cleating angle can be set in one of two positions - use the included riser kit for a higher cleating angle. A... MSRP: Now: $85.02 Add to Cart Compare Selected ×
Viadana Inox JamCleat Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32" MSRP: Now: $1.46 Add to Cart 5/16" (8mm) Ronstan Small Mainsheet Swivel Cleat Base FEATURES Ball bearings support the cleat arm. An integral stop prevents over rotation, but can be removed to allow full 360° rotation. The cleating angle can be set in one of two positions - use the included riser kit for a higher cleating angle. A... MSRP: Now: $85.02 Add to Cart Compare Selected ×
5/16" (8mm) Ronstan Small Mainsheet Swivel Cleat Base FEATURES Ball bearings support the cleat arm. An integral stop prevents over rotation, but can be removed to allow full 360° rotation. The cleating angle can be set in one of two positions - use the included riser kit for a higher cleating angle. A... MSRP: Now: $85.02 Add to Cart Compare Selected