Cast Jam Cleat

A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for...

Viadana Inox JamCleat

Comes with manufacturer two-year warranty Material - Inox Min line size - 3mm / 1/8" Max line size - 6mm / 1/4" Hole Spacing - 46mm / 1 13/16" Hole Diameter - 4mm / 5/32"

Clamcleat Line-Lok™ Cleats

Easy to tension, easy to release even when wearing thick gloves. Grips the line to resist being shaken loose-even in extreme conditions. Two sizes hold a wide variety of ropes - from 0 to 5mm (0" to 3/16"). Patented toothform holds high loads without...

Nylon Open Clamcleats

A deceptively simple ridged `V' groove holds ropes firmly, yet is devoid of any moving parts to break or seize. It allows the immediate release of the rope by a short upward and backward pull. Always tension the rope before it enters the cleat...

Seadog Brass Cleats

Brass tie-down cleats are polished castings and very handsome. For the 3" and 4" cleats you have the option of ordering brass wood screws for mounting on drawers or cabinets. These are not recommended for use mounting these cleats on a boat. We...

Nylon Clamcleats with fairleads

Injection molded nylon A deceptively simple ridged `V' groove holds ropes firmly, yet is devoid of any moving parts to break or seize. It allows the immediate release of the rope by a short upward and backward pull. Always tension the rope before it...

Racelite Stainless Jam Cleat

Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Narrow 5/8" base. 3-1/4" long. Takes #10 screws.

Viadana 9/16 Camcleat with Swivel base and fairlead

Comes with manufacturer two-year warranty Material - Aluminum/Stainless Steel Min line size - 6mm / 1/4" Max line size - 14mm / 9/16" Hole Spacing - 32mm / 1 5/16" Hole Diameter - 5mm / 3/16" Max Working Load - 140 kg / 242...

Seadog Aluminum Cleats

Cast Aluminum Aluminum tie-down cleats have a smoother finish than the iron, and are lighter if weight is a consideration Available in 4", 5", & 6" sizes  

Seadog Zig Zag Cleat

Simply weave rope around cleat arms, no knots needed. Great for fender lines, trailer covers and utility lines. Fits line up to 3/8".Part#ABCDFastenerSD-0435403-1/2"15/16"1-15/16"1-3/4"1/4FH

Viadana 5/16 Camcleat with Swivel base and fairlead

Comes with manufacturer two-year warranty Material - Aluminum/Stainless Steel Min line size - 3mm / 1/8" Max line size - 8mm / 5/16" Hole Spacing - 21mm / 7/8" Hole Diameter - 4mm / 5/32" Max Working Load - 100 kg / 220 lbs

Seadog Nylon Cleats

Your basic black nylon tie-down cleats. They are resistant to salt and sun, and will outlast your boat. Available in 3" ,4", 5", & 6.5" sizes  

Aluminum Side Entry Clamcleats

Aluminum The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. These cleats were strongly recommended by Mike Storer. Click to view/download installation guides:  SD-002171 SD-002172

Buck Algonquin Bronze Herreshoff Style Cleats

Sand Cast Bronze Cleats for any boat that aspires to a traditional look. It seems like finding bronze hardware is getting more difficult—especially pieces that don't cost as much as you paid for the boat you're putting them on! So we are pleased to...

Ronstan Medium Fairlead V-Cleat

V-Cleats are a simple solution to cleating lines under moderate loads.Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system. Features: Lightweight and corrosion proof Greater abrasion resistance than traditional plastic...

Clamcleat Racing Junior Mk2 & Keeper

Aluminum/Nylon/Acetal A neat, compact alloy cleat. Manufactured from aluminium for light weight and durable performance. SD-002112 Mk2 has a silver stove enamel finish for a cost effective, high quality coating. Patented Keeper diverts the rope away from...

Clamcleat Trapeze & Vang Cleats

This Aluminum cleat has an in-built pulley that offers a compact solution for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock, that is easy to release is required. The Sailor's preferred choice for adjusting trapeze lines, for light...

Auto-Release Clamcleats

Aluminum & Acetal This exciting new cleat will release a line when a set load is exceeded. It's perfect for a hold down for pivoting rudders and leeboards! The cleat flips up to release the rope when a set load is exceeded. The SD002570 is easily...

Racelite RL-260-S Camcleat

These economical yet durable camcleats from Race-Lite are just the thing for quick set and release of sheets and other lines on your sailboat. They are also handy for other jobs where precise adjustment of rope or line is needed. See also RL-261, and...

Seadog Heavy Duty Nylon Cleats

Heavy duty black nylon tie-down cleats. They are resistant to salt and sun, and will outlast your boat. Available in 4.5, & 6.25" sizes

Seadog 4" Open Base Die Cast Cleat

These die cast chrome plated cleats are interchangeable with Perko® style 1210 cleats. Complete w/ galvanized studs, washers and nuts threaded into each leg of the cleat. This eliminates the need for fasteners and provides a clean looking installation...

Racelite RL-261 Camcleat

Similar to the RL-260 camcleat but with a glass-filled flange base for surface mounting. Use four countersunk #8 wood or machine screws. Available with or without stainless steel fairlead/strap. Bolts are on 1-1/2" centers - works best with 7/16" line or...

Loop Clamcleats

A nylon cleat with a tooth design that offers a quick, positive lock that is easy to release. Works with line sizes 1/8" to 1/4" (3-6mm). The side entry fairlead allows the cleat to be hooked onto the line, without threading the rope through an eye,...

Nylon Lateral Clamcleats

Injection molded Nylon Sea-Dog Nylon lateral clamcleats - mount on either side of a centerboard case, on gunwales, coaming, or other vertical surface.

Ronstan Swivel Cleat Base

Alloy cleating arms Grade 316 stainless steel fittings Swivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy guage alloy for stiffness and...

Seadog Galvanized Iron Cleats

Cast Iron, Hot dip galvanized Part# A B C D Fastener SD-040103 3.5" 1" 13/16" 1-5/8" #8FH SD-040104 4' 1-1/8" 7/8" 1-7/8" #10FH SD-040105 5" 1-5/16" 1-1/16" 2-3/16" #12FH SD-040106 6" 1-3/8" 1-1/4" 2-3/16" 1/4"

Clamcleat Aluminum Boom Cleat & Keeper

Aluminum/Nylon/Acetal Anodized Aluminum - These cleats can be mounted flat or on a curved surface such as a boom (see illustration at bottom of page). Aluminum construction means these cleats will stand up to more use and abuse than Nylon cleats will...

Racelite RL-260 Camcleat

These economical yet durable camcleats from Race-Lite are just the thing for quick set and release of sheets and other lines on your sailboat. They are also handy for other jobs where precise adjustment of rope or line is needed. See also RL-261, and...

Seadog Stainless Steel Cleats

Herreshoff style Stainless Steel tie-down cleats. They are resistant to salt and sun, and will outlast your boat. Available in 4, 5, 6, & 8 inch sizes.(Note: the Potter factory specifies the 6" SeaDog Stainless Cleat for its 15 & 19 foot...

Ronstan V-Jammer

Features65mm (2 1/2") long.18mm (11/16") wide.4mm (5/32) mounting holes.Typically used on dinghies, catamarans and small keelboatsGrade 316 stainless steelHere is a view of the cleat from the front showing the fairlead or guide:

Ronstan Cam Cleat & Guide

RF5000 Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance. Cam profile and mult-coil spring minimise line entry and release effort. Carbon fibre...

Viadana Cam Cleat & Fairlead

Viadana Camcleat #25.10Takes up to 5/16" rope or line Comes with manufacturer two-year warranty Material - Aluminum Min line size - 3mm / 1/8" Max line size - 8mm / 5/16" Hole Spacing - 27mm / 1 1/16" Hole Diameter - 4mm / 5/32" Max Working Load - 100 kg...

Open Aluminum Boom Clamcleat

Anodized Aluminum - These cleats can be mounted flat or on a curved surface such as a boom. Aluminum construction means these cleats will stand up to more use and abuse than Nylon cleats will. Click HERE for installation...

Seadog Halyard Cleat

Nylon construction with stainless steel mounting plate. Designed to mount on any 3/16" - 5/16" diameter shroud and used for tying off a halyard when not in use. Additional uses include mounting attachments for flags, solar showers, awnings, topping lift...

Racelite RL-261-S Camcleat

Similar to the RL-260 camcleat but with a glass-filled flange base for surface mounting. Use four countersunk #8 wood or machine screws. Available with or without stainless steel fairlead/strap. Bolts are on 1-1/2" centers - works best with 7/16" line or...

5/16" (8mm) Ronstan Small Mainsheet Swivel Cleat Base

FEATURES Ball bearings support the cleat arm. An integral stop prevents over rotation, but can be removed to allow full 360° rotation. The cleating angle can be set in one of two positions - use the included riser kit for a higher cleating angle. A...