Motor Boats 16' to 20'

Clyde 18 Plans

The Clyde 18 is a modified Power 1.3 Mk 1 design. The hull shape is a simple deadrise type, single chine 'V' bottomed. The hull is parallel sectioned aft of the wheelhouse which means that she can be easily lengthened or shortened. Construction is for...

Rufus 17 Plans

The RUFUS 17' motor boat is a simple rugged craft with jaunty good looks. She has 3 chines per side and plenty of freeboard and beam, giving her an excellent carrying capacity and very good stability. She can be made as a simple open launch, in which...

Skellig 19 Plans

The Skellig 19 is based on our Skellig 18 workboat/fishing boat. In this case the client wanted a slightly bigger boat made of steel to be used as a strong and rugged work/fishing boat in Irish waters. The hull plating is 3mm over 4x75mm frames...

Power 2.2 Plans

This craft is a widened and a more sophisticated version of our Power 2 design. The bottom panel has been slightly veed to give a softer ride and her depth has been increased. This along with her wider beam enables her to be fitted out with a more...

Jarvis 17 Plans

The Jarvis 17' motor launch has been drawn up for clinker/ply construction - a building jig is made which consists of chipboard mould shapes mounted on a strongback. Ribbands (stringers) are inserted into the moulds at each lap and these help in...

Ceecan 19 Plans

CEECAN is a simple river cruiser for outboard power. Her hull may be stretched or shortened to suit and her superstructure and deck layout changed to you own requirements. The drawings give details for the hull and superstructure construction. She may...

Rathlin 20 Motor Yacht Plans

For Motor Sailer Supplement Click HERE Our Rathlin design is not the type of motor yacht that you would normally see these days as a new ‘‘modern’’ design. Most new craft of the motor type to come off the drawing board now,...

Power 1.3 Plans

The Power 1.3 is a development of the original Power 1 design. In this case, we were asked to produce a simply built hull with more capacity and suitable for offshore and estuary conditions. We have retained the flat bottom section which eases and...

Skellig 18 Plans

The Skellig 18 is based on our Skellig 26 workboat/fishing boat. She has a double chined V bottom shape with generous beam making her a very stable working platform for all kinds of duties. The hull, with it's high volume and weight carrying capacity...

Ruby 19 Plans

The Ruby 19 is based on our Ruby 22 double chine plywood steam launch. In the case of the Ruby 19 a client wanted a shorter version of the 22 to be built in steel which meant widening and deepening her to take the steel weight. Having produced the...

Rufus 20 Plans

The RUFUS 17 plans have included the hull panel and frame shapes for a 20' x 8' version which were requested as a modification. I have now taken the 20' details and added a full set of plans for this version including hull construction details, deck...