Aluminum Vertical 4-Switch Panel

Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20 preprinted decals to customize to your specific...

Aluminum Breaker Panel

Aluminum Breaker Panel features six 15A 12 VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. Includes a sheet of 20 preprinted decals to...

Toggle Switch Panel with USB Power Socket

The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of...

Seadog 4" LED All Around Light

LED Fixed Mount All Around Lights are approved for USCG 2NM (Colreg 2 mile). 12 Volt DC.Company boilerplate:"LED Fixed Mount All Around Lights are approved for USCG 2NM (Colreg 2 mile). 12 Volt DC. Note: All USCG approved navigation lights must be...

Factory Potter Bow and Stern Lights

12V Navigation Lights for use on boats under 65 feet

Navilight Tricolor 2NM w/Navimount base

Portable Tricolor Navigation light with Navimount base, compatible with Navisafe's Navimount system and many GoPro® / Action camera mounts. The Navilight Tricolor without the Navimount base can be mounted directly to the 4-piece-pole but also...

Factory Potter Masthead Light Bracket

These brackets are used for both the Potter 15 and the Potter 19.

Navilight 360° Rescue

If you’re only going to have one light on your small boat—this might be the one! Powerful LED, it’s waterproof, it floats, it works as anchor light, all-round light, stern light, flashing light—even a cabin light. And it glows in...

Seadog LED Utility Light

More of a courtesy light than anything. This little LED lights amber and uses an incredibly small abount of electricity. Hook directly to 12 volt source to light the cabin of your little cruiser.  

Navimount Pole Pack

1 x 4-piece-pole 1 x Magnet holder 1 x Navimount Vertical / 950 1 x Navimount Horizontal / 952 1 x Neoprene stowaway bag Size incl. neoprene stowaway bag: H = 36 mm, Dia. = 80 mm Weight (incl. neoprene stowaway bag): 550 g

Seadog 4 Wire Inline Trailer Plug Tester

Nylon/StainlessIncludes cover to meet ABYC/USCG Requirements. Maximum Amps: 150. Maximum Volts: 48 DC.

Seadog Terminal Post

Nylon/Stainless Includes cover to meet ABYC/USCG Requirements. Maximum Amps: 150. Maximum Volts: 48 DC. A B C D E F Fastener 3-3/4" 1-11/16" 1-5/8" 1-5/16" 2-3/16" 5/16-18 #8 RH

Seadog Short LED All Around Light

Injection molded polycarbonate - 12 Volt DC. LED All Around Lights are approved for USCG 2 NM (Colreg 2 mile). Part# A B C Fastener SD-400042 4-5/16" 1-1/8" 2-1/4" #12 RH  

Fixed Mount Combination Masthead / White All-Round Light

Fixed MountBlack Polymer and Chrome Plated Zinc Allow TopBulb: 12 Volt (included)Pole: 3/4" Dia. AnodizedBase Dimensions: 1" x 2-5/8"Mounting Screw Size: #8

Navimount Rail Base

The Navimount RAIL is designed to attach the Navilights with Magnetic base, Navimount base or Suction base to any 25 or 35 mm / 1" or 1-¼" rail. Technical Specs Size: H = 67 mm, Dia. = 65 mm Weight: 120 g Model Name: Navimount RAIL Model Nr.:...

Seadog Illuminated 6 Fuse/Switch Panels

Fire Resistant Injection Molded Nylon/with Illuminating Switches Panel rating: 12 volt, 37 amps total. Individual circuit: 10 amps maximum. Meets CE specifications. All panels take standard glass fuses. To customize panel to your specific setup,...

Navilight Tricolor 2NM - magnetic base

The Navilight Tricolor 2NM - US Coast Guard approved for 2 nautical miles includes a green light to be shown at the starboard side and a red light to be shown at the port side. In addition, it includes the white Sternlight, to be used at the stern. It is...

Seadog LED Port and Starboard Navigation Lights

Stainless Steel (above)or Black (right) finish - 12 Volt DC. Now you don't have to worry about converting standard nav lights to LED. The LED's actually emit red or green light. This makes them much more effecient than putting white lights behind...

Seadog Removable LED All Around Light

Injection Molded Nylon/Chrome Plated Zinc. LED Removable All Around Lights are approved for USCG 2NM (Colreg 2 mile). 12 Volt DC. Note: drawing is not proportional   Part # A B C D Fastener SD-400015 24-5/8" 18-1/2" 5/8" 2-7/8" #8FH

Navimount Horizontal Base

The Navimount Horizontal is designed to attach the Navimount Pole or the Navilights with Navimount base (model 040, 340) to horizontal surfaces - e.g. the boat deck or cabin roof. Includes- two self tapping stainless steel screws Technical Specs Size: H...

Navisafe Skiff & Dinghy Complete Kit

The Navisafe Complete Dinghy Kit is probably the most flexible and easy to mount pack of all lights and mountings needed to equip most dinghys and small sailboats up to 12m with Navigation lights in compliance with COLREG 72.Comfortable storage in...

Seadog Illuminated 4 Fuse/Switch Panels

Fire Resistant Injection Molded Nylon/with Illuminating Switches Panel rating: 12 volt, 37 amps total. Individual circuit: 10 amps maximum. Meets CE specifications. All panels take standard glass fuses. To customize panel to your specific setup,...

Seadog Bakelite Terminal Blocks

Stamped Brass/Molded Bakelite/10 Amps terminals Part # Terms. A B C D E Fastener SD-426604 4 7/8" 11/16" 2-3/16" 1/4" 7/16" #4 RH SD-426608 8 7/8" 11/16" 3-11/16" 1/4" 7/16" #4 RH   Stamped Brass/Molded Bakelite/20 Amps...

Seadog Universal Kill Switch

Stamped Brass/Injection Molded Nylon & Delrin Replace lanyard if worn, cut or frayed. Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill depending on the application.WARNING: Test switch for proper function before...

Seadog Dual Battery Switch

Machined Brass/Injection Molded Nylon This is a typical two battery switch. It is handy for any boat with two batteries - usually where one is a starter battery and the other is a deep cycle battery for lights. Switch to "1" to start, to "ALL" to charge...

Portable LED Navigation White Lights

burns for over 100 continuous hours on a charge Since we first started carrying these wonderful LED portable navigation lights, we have sold hundreds of them with almost no complaints. What's to complain about - they work! These lights are very well...

Seadog Instrument Panel Decal Sheet

The label decals that come with our Sea-Dog Fuse/switch panels are not very comprehensive. This decal sheet has many more options. Here is a list of the tags:AC MAIN SHORE BILGE PUMP AIR COND. BOW LIGHT RUNNING LIGHTS HEATER COCKPIT LIGHTS CABIN LIGHTS...

Seadog Retro Side Lights

Plastic/Stamped 304 Stainless Steel - 12 Volt DC. We picked these out for a Rifleman that we were building. We love the retro look One pair includes one starboard (Green) and one port (Red). NOTE: Bulbs are NOT LED.   IMPORTANT INSTALLATION NOTE:...

Portable LED Navigation Bow Lights

burns for over 100 continuous hours on a charge Since we first started carrying these wonderful LED portable navigation lights, we have sold hundreds of them with almost no complaints. What's to complain about - they work! These lights are very well...

Seadog LED Combination Bow Light

Stamped 304 Stainless/Injection Molded ABS - 12 Volt DC. These quality LED combination bow lights are approved by the Coast Guard and have a much lower power requirement than incandescent ones. No lenses are used, they have actual red and green bulbs for...

Navilight 360° 2NM w/Navimount base

Portable All-round white Navigation light with Navimount base, compatible with Navisafe Navimount system and many GoPro® / Action camera mounts. The Navilight 360° without the Navimount base can be mounted directly to the 4-piece-pole but also...

Seadog Folding LED All Around Light

Injection Molded Nylon/Chrome Plated Zinc. LED Fold Down All Around Lights are approved for USCG 2NM (Colreg 2 mile). 12 Volt DC. Note: drawing is not proportional   Part # A B C D Fastener SD-400013 24" 1-7/8" 2-1/2" na #8FH

Navimount Vertical Base

The Navimount Vertical is designed to attach the Navimount Pole or the Navilights with Navimount base (model 040, 340) to vertical surfaces - e.g. the transom of an inflatable boat, canoe/kayak cockpit or steering console. Includes- two self tapping...