The Sea-Lect Designs Quarter Turn Deck Plate w/ Internal Collar is molded with a collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Lubricate with Teflon grease, Vaseline...
If you make a fancy birdsmouth double paddle for your kayak, or even a solid wood paddle from a section of closet rod - you may want to be able to break it down for transport or storage. It will certainly fit in your car more easily that way. Now you can...
Everything needed to rig your Tru Course Rudder to operate with Rudder Control Kayak Footbraces on most kayaks.
Here is what is included in the rigging kit:
2 x CABLE GUIDE TUBING - 15'
2 x CABLE 1/16 7X7 STAINLESS - 15'
1 x 3/16 INCH...
Replacement button for take-apart paddles and other similar applications.Be sure to select proper size (button diameter).
These nylon bags feature a rigid ring which fits neatly into the corresponsing SEA-LECT Designs Quarter Turn Deck Plates, Screw Out Deck Plates and Recreactional kayak hatches - w/ Internal Collar. The Red bag has a drawstring closure...
the photo above shows contents of kit
Add or replace kayak rigging for securing needed items when on the water. (see installation video below)
Kit Includes: (1) 11' Deck Bungee, (6) Nylon Pad Eyes, (1) Mounting Hardware Pack & Easy Install...
Greenland style paddles have become popular among kayakers. Not only do these beautiful paddles have a long tradition, but they have definite performance advantages as well.
Like any kayak double paddle, there are distinct advantages to adding...
A lower cost alternative kayak hatch cover
RECREATIONAL HATCH LINE:
These are an economical alternative to the Performance covers. They fit the same rings but are molded from a single type of flexible, rubbery plastic. They seem to be a bit easier to...
These Drain Plugs are designed with a molded-in recess in the base, thus trapping the sealant in place and providing a more water-tight seal. They also have a captive mechanism that keeps the plug in the body but still allows easy removal of the plug...
These heavy duty injection molded Nylon hooks are attached to a deck to retain a piece of shock cord used to hold down various loose pieces of gear.PartABCDEK6714157/8"5/8"15/16"1-3/16"9/16"
K081350A3/8in.B1/2 in.C1-3/8 in.Weight.01 lb.
The SEA-LECT Designs utility paddle leash will keep your mind at ease while you reel in your tournament clinching fish by keeping your focus on landing that lunker and not managing your paddle. Comes with leash and paddle strap...
kit contains all the parts shown above
Store your paddle or pole while on the water using the newest kit offering from SEA-LECT Designs. (see installation video below)
Kit Includes: (2) 18" Keeper Bungees, (4) Bungee Terminal Ends w/ Sleeves,...
Has internal collar to accept SeaLect bags
These rings have an internal collar to accept SeaLect Bags. Below is a picture of the hatch with the red drawstring bag (bags sold separately):Covers can be bought HERE
For sharply pointed sterns
After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the problem of attaching rudders to canoes and kayaks. Use two of...
If you are planning to add rudder control to your kayak, and you need both the SeaLect rudder control footbraces and a TruCourse rudder, you should consider buying them both along with the rigging kit and saving some money. Here is what you get in the...
One piece paddle clip allows for the simple one handed storage of your paddle, anti snag ramps prevent line getting stuck under the clip when not in use, and leash attachment points for securing a paddle leash.Part #ABFastenerK7373611-1/8"4"1/4" OH
In cases where your foot peg makes contact with the underside of your deck, use a pair of Kayak Footbrace Height Adjusters to move the mounting location down without the need to drill new mounting holes through your boat. Includes one pair of Height...
Injection molded Nylon
Replacement blade only for SeaLect TruCourse Rudder.
Injection Molded Polypropylene Fiberglass/Nylon
These parts are used to manage shock cord on the decks of kayaks.Dimensions and specifics below
Round Line Guide - K736530
A= 1.5" - B= 3/8"
Bungy Block -...
used to convert standard footbraces to rudder control. Includes tension adjusters.
SEA-DOG's new pivoting pedal foot brace system is designed with the same strength and stiffness as our adjustable foot brace version, which has been an industry standard retro-fit for years. By using the same track, adjustment rods and clamps it is now...
Replacement plug for SD-520010, SD-520020, and SD-520030
The fastener pads are flat topped to accept 3/16" pop rivets or pan head screws.316 Stainless Steel K081850A11/32 in.B11/32 in.C1-1/16 in.Fastener3/16" Pop RivetWeight.02 lb.
These SEA-LECT Designs Deck Plates are molded with a collar on the bottom to hold deck plate bags or other round containers. Use silicone sealant on hull or deck surface when installing the deck plate. Lubricate with Teflon grease or Vaseline...
Black Nylon rudder cable tubing. 3/16" OD. This is the same material used in the SeaLect Rigging Kit - which has 2 - 15 foot pieces. If you need more than that you can order it by the foot. Typically used with 1/16" Stainless cable.
These stainless hooks are attached to a deck to retain a piece of shock cord used to hold down various loose pieces of gear. The picture below shows an example.
These are absolutely the best kayak footbraces we have ever seen. They are resistant to any of the things you might run into including water, sand, fish scales, sunlight - nothing will stop these footbraces from working properly.
The pedal is molded...
SEA-LECT Designs Kayak Recreational Footbraces are designed to be maintenance free with tremendous strength - at a price that's attractive to everyone! With three attachment options and low profile pedal that mounts easily in most boats, this footbrace...
For replacements or new boat constructionNot sure which hatch fits your production boat? Click here for a partial list of manufacturers and hatch part numbers.
Outside edge of raised mounting ring
When you don't want to mount your footbraces by drilling a hole through your kayak, simply fiberglass or glue on studs to act as the mounting bracket. This kit includes four studs, four clamps, four nylock nuts and two cable adjuster clamps. This kit...
Tension Adjuster (circled) K747260
If you own a pair Sea-Lect Rudder Control Foot Braces but somehow did not get the tension adjusters that we provide or if they have been damaged somehow, these are OEM replacements.
For replacement blade click HERE.
SEA-LECT Designs puts its engineering innovations to work with its radical new kayak rudder, which sports a unique combination of practical and high-performance features.
What sets SEA-LECT Designs' rudder...