Shroud & Stay

  • Racelite Formed Tangs (Hounds)

    Racelite Formed Tangs (Hounds)

    Two of these stainless formed tangs constitutes a hound. The ones in the photo above are held together by a twist tie to show how they would be aligned in practice. Part No. Mast Size Strap Hole...

    $6.37
    Add to Cart
  • Stainless Bow Fitting

    Stainless Bow Fitting

    Built from .090" stainless steel for extra strength. Base 3-1/2" long by 2-1/4" wide teardrop shape. Takes four #10 screws. Fin has two 1/4" holes and one 1/2" hole for jib tack.

    $18.50
    Add to Cart
  • Racelite Stainless Shroud Adjusters

    Racelite Stainless Shroud Adjusters

    Stainless steel - two sizes For coarse adjustment of wire shrouds or stays. Each complete with two 1/4" dia pins and retainer rings. Dimensions: Part Length Width Hole dia. Strap thickness RL-245S 5-1/2" 5/8" 0.264" 0...

    $7.89 - $8.73
    Choose Options
  • Racelite Deck Plate

    Racelite Deck Plate

    This stainless steel deck plate can be used with our RL-349 shroud adjuster or RL-305-A or RL-205 blocks. It comes complete with clevis pin and ring. wt 1/2 oz.

    $3.82
    Add to Cart
  • Forestay Tensioning Lever

    Forestay Tensioning Lever

    Mast-raising and rigging goes much easier if you can attach the forestay quickly and easily. These quick-release, adjustable forestay levers from C.Sherman Johnson are the perfect solution for many trailerable sailboats up to around 26-feet. These are...

    $62.00
    Add to Cart
  • Racelite Small Stem Fitting

    Racelite Small Stem Fitting

    Built with a stem for extra strength. Base 3" long by 1.5" wide tapering to 5/8". Stem is 4" long, 5/8" wide & 0.085" thick w/ 3 1/4" holes. Takes up to 6 #10 screws. Fin has two 1/4" holes and one 3/8" hole. All stainless steel construction.

    $14.24
    Add to Cart
  • Ronstan Roller Furling Gear

    Ronstan Roller Furling Gear

    Two furlers available & swivels RF76   Ronstan Above Deck Jib Furler SS ball bearing swivel unit. Fork & fork take-off with 6.4 mm (1/4") diameter Pins. Overall height 80 mm (3 1/8") Breaking Load: 3740 lbs.- Used on small dinghies and...

    $65.41 - $254.96
    Choose Options
  • Racelite Stainless Chain Plates

    Racelite Stainless Chain Plates

    Stainless Steel Chainplates transfer the stress from standing rigging down into the hull. They may also have other uses for all kinds of applications. Use your imagination. Premium stainless steel made in the USA by Racelite. Cat No...

    $2.28 - $5.11
    Choose Options
  • Racelite Bow Fitting

    Racelite Bow Fitting

    All Stainless heliarc welded construction for extra strength. 3-1/4" long by 1-1/2" wide, tapering to 5/8" at ends. Holes take # 10 flat head screws or bolts. Fin is 2-1/2" long & 1/8" thick with (2) 1/4" holes and (1) 3/8" hole. Complete with matching...

    $13.11
    Add to Cart
  • Ronstan 5/16" Tang

    Ronstan 5/16" Tang

    8mm (5/16") dia. clevis pin, 64mm (2 1/2") long, 1 x 9.5mm (3/8") fixing holeUsed for terminating wire riggingGrade 316 stainless steel1.4 oz. - 40 g

    $19.51
    Add to Cart
  • Racelite 3/4" Stainless Tangs

    Racelite 3/4" Stainless Tangs

    These tangs are made from 0.062" stock and have 3/16" dia holes in the ends. The hole centers are 3/8" from the ends. Nominal lengths are not from hole centers but total overall length.

    $1.95 - $3.54
    Choose Options
  • Small 7 Hole Quick-Release Shroud Levers

    Small 7 Hole Quick-Release Shroud Levers

    Adjust and tension dinghy rigging with the ease of a lever. C. Sherman Johnson shroud adjusters were designed for one design dinghies to make quick rig adjustments or to de-tension the rig for storage or to unstep the mast. 7 positions allow for micro...

    $37.50
    Add to Cart
  • Ronstan 1/4" Tang

    Ronstan 1/4" Tang

    6.4mm (1/4") dia. clevis pin, 51mm (2") long, 1 x 6.4mm (1/4") fixing holeUsed for terminating wire riggingGrade 316 stainless steel0.7 oz. - 20 g

    $14.41
    Add to Cart
  • Racelite Deck Mounted Chain Plate

    Racelite Deck Mounted Chain Plate

    Deck mounted shroud chain plate has 1/4" mounting holes on 1-1/2" centers with one 1/4" clevis pin hole. Constructed of 3/32" thick stainless steel bent to a 65 degree angle.

    $4.08
    Add to Cart
  • Racelite Deck-Plate

    Racelite Deck-Plate

    This stainless steel deck plate can be used with our RL-305-B blocks. Takes #8 RH screws. Base 2-1/2" long. Stainless steel. You may need a 5/8" x 3/16" Clevis Pin

    $2.85
    Add to Cart
  • Ronstan Eye/Eye Ball Bearing Barrel Swivel

    Ronstan Eye/Eye Ball Bearing Barrel Swivel

    Ball bearing swivels like this one have lower friction and higher working loads than non ball bearing versions. Used in conjunction with blocks and rigging systems to provide articulation and rotation. Not suitable for high speed rotating...

    $59.41
    Add to Cart
  • Racelite 1/2" Stainless Tangs

    Racelite 1/2" Stainless Tangs

    Stainless Steel These tangs are made from 0.062" stock and have 3/16" dia holes in the ends. The hole centers are 1/2" from the ends. Nominal lengths are not from hole centers but total overall length.

    $1.61 - $2.92
    Choose Options
  • Ronstan Closed Thimbles

    Ronstan Closed Thimbles

    Make eyes in rope or wire ropeRonstan ThimblesCable Ø1/8"1/4 in.A11/32"13/16 in.B3/16"11/32 in.C5/8"1 5/16 in.Weight0.1 oz.0.7 oz.

    $6.95 - $8.50
    Choose Options
  • Heavy Duty, Stainless Thimbles

    Heavy Duty, Stainless Thimbles

    Stamped 304 Stainless Heavy duty stamped 304 stainless steel thimbles. The smaller sizes are used to relieve wire rope where it goes around clevises, tangs, chainplates, etc. The larger sizes are typically used with rope such as on anchor lines where...

    $0.72 - $8.78
    Choose Options
  • Ronstan 3/16" Tang

    Ronstan 3/16" Tang

    5mm (3/16") dia. clevis pin, 76mm (3") long, 2 x 5mm (3/16") fixing holesUsed for terminating wire riggingGrade 316 stainless steel0.5 oz. - 15 g

    $19.43
    Add to Cart
  • Racelite Chain Plate Covers

    Racelite Chain Plate Covers

    Stainless SteelPart #OverallSlotThicknessMtg HoleRL-344-B2" x 1"1.04" x 0.135"0.060"0.165"RL-4453" x 1.25"2.070" x 0.250"0.090"0.165"RL-4203.5" x 0.878"2.070" x 0.250"0.060"0.200"

    $2.74 - $4.47
    Choose Options
  • Racelite Stem Fitting

    Racelite Stem Fitting

    All Stainless heliarc welded construction for extra strength. 3-1/4" long by 1-1/2" wide, tapering to 5/8" at ends. Holes take # 10 flat head screws or bolts. Fin is 2-1/2" long & 1/8" thick with (2) 1/4" holes and (1) 3/8" hole. 

    $14.56
    Add to Cart
  • Seadog Closed, Stainless Thimbles

    Seadog Closed, Stainless Thimbles

    Cast 304 Stainless Heavy duty stamped 304 stainless steel thimbles. These can be used for wire rope and are especially recommended for use with 12 strand Spectra line.For more sizes of these thimbles from Ronstan, click HERE Part...

    $1.25 - $1.44
    Choose Options
  • Stainless Turnbuckles

    Stainless Turnbuckles

    If you're building a new boat or replacing turnbuckles on your trailersailer, consider these top-of-the-line turnbuckles. Instead of the classic tubular style, these turnbuckles jaw/jaw turnbuckles are slightly open so you can see what's going on inside...

    $51.99
    Add to Cart
  • Seadog Jaw & Jaw Turnbuckles

    Seadog Jaw & Jaw Turnbuckles

    Machined 316 Stainless Each Sea-Dog Stainless Turnbuckle is made from AISI 316 stainless steel and features an electropolished bright finish at no additional cost. All thread sizes and wire rope sizes now conform to U.S. standards and are interchangeable...

    $28.57 - $37.16
    Choose Options
  • Ronstan Mast Hound

    Ronstan Mast Hound

    Suits mast dia.s between 76mm-115mm (3"-4 1/2") 316 Stainless Used for terminating wire rigging Wt. 3.9oz - 110g

    $28.86
    Add to Cart