55' Trinity Cove Motor Yacht Plans

This new design was originally drawn up for Cedar Strip construction but drawings were added later for single skin GRP construction too with the plug based on the original strip planked hull. The hull uses the classic easily driven shape of our...

Power 4 Plans

After many requests, we have extended the simple concept of the Power 1 and 2 motor launches to a length of 32' with a beam of 10'9". At the moment, the drawings for the hull and deck construction are available allowing the client to choose or design...

57' Avoncliff Wide Beam Barge Plans

These plans are for the steelwork only of a 17.45m (57') wide beam barge. The plan set consists of 6 drawings covering Hull Construction, Hull Construction Details, Deck/cabin Construction, Deck/cabin construction details, Hull panel shapes and Rudder...

45' Teign Motor Barge Plans

One of our clients wanted to match the advantages of strip planking with an easily built but attractive motor barge hull. In stead of using a slab sided hull seen on so many modern steel barges, we have been able to use the ability of strip planking to...

55' Plywood Motor Yacht Plans

These drawings show the construction details for the plywood hull only of a 55' x 15' (16.78m x 4.58m) single chine (with spray rail) 'V' bottomed motor yacht capable of speeds up to 25 or more knots. Full details including computer generated and...

35' Steel Motor Yacht Plans

Similar to the 55 footer below, we have details for the construction of a 35' steel motor yacht hull. The plans include the steel work drawings for the hull and engine beads and the computer generated hull panel shapes. She has a beam of 11'6" (3.5m)...

32' X 10' Motor Barge Plans

This is a shortened version of the 45' Teign Motor Barge and has the same flat bottom panel for maximum capacity and ease of construction. We have the plans for the hull construction in, strip plank, plywood and steel. Also note that we have now added...

32' x 6' 9" Steel Canal Tug Plans

We have drawn up the steel construction details (hull, deck, sterngear and rudder details only) for this 32' canal boat based on a tug design with a fantail aft end and narrow boat lines amidships running into a tug type bow. She may be fitted out in a...

57' Avoncliff Narrow Boat Plans

These plans are for the steelwork only of a 17.45m (57') narrowboat. The plan set consists of 7 drawings covering Hull Construction, Hull Construction Details, Deck/cabin Construction, Deck/cabin construction details, Hull panel shapes, Rudder and engine...

36' Bullfinch Narrow Boat Plans

The Bullfinch is a typical standard steel narrow boat with a cruiser stern for home construction. The drawings and details are for the hull, deck and superstructure steel work only. Engine bed and rudder details are also shown. A study plan showing a...

41' Humber Steel Motor Barge Plans

This is a steel multi-chine motor barge for use in the waters of the UK and Europe, crossing the Channel and exploring the rivers and canals of the European mainland. She has a section of parallel middle-body which means that she can be stretched. She...

Hinton 15M Plywood Barge Plans

This is a simple barge with flat bottom single chine shape and a "swim" shaped stern (under the waterline similar to narrow boats). The bow would be vertically staved plywood in 2 or 3 overlapping layers. Construction details are available for the hull...

36' Hawfinch Wood Narrowboat Plans

We have often been asked for a wood version of a steel narrowboat and here it is. Narrowboats were of course made from timber in the first part of the last century although then, they used heavy boards of Elm and Oak. This version uses several layers...

36' Motor Yacht Plans

The drawings for this 36' motor yacht consist of lines, offsets, layout and profile details. Construction drawings and details can be furnished to the client to suit whatever method of build he requires. For the discerning motor yachtsman wanting a...

39' Chaffinch Narrow Boat Plans

The Chaffinch is a trad sterned narrow boat - drawings give the computer faired and generated hull panel shapes and full details for steel construction. The steel work drawings give details for the FW tank, rudder, sterngear/engine installation and weed...

65' Teign Motor Barge Plans

I have recently drawn up the steel work/construction drawing along with the frame and plate shapes for a steel multi-chine version of the 45' Teign Motor Barge. We can also send details for the rudder engine beds etc for the 45' version as guidance for...

Somerset 11 Houseboat Plans

This is a simple barge with flat bottom single chine shape and a "ramped" shaped bow and stern. Despite the fact that this is a 'static' boat, the hull has been drawn to give a tough basis for whatever top is required. the drawings give the details for a...