Electric Boats

The concept for The SWAN BOAT was inspired by Sharon Torregrosa, who designed & built her own Swan motif boat. This portable version includes an ample beam, good freeboard, generous internal volume and multi-seating. It is sturdy, easy to build,...

We used the Edwardian 26 as a basis for this launch. We were asked to change the stern shape to a rather handsome counter and add more beam, but not too much, just enough to give her a more comfortable interior without taking away from her sleek lines...

This new design has been floating around in my head for several years now. I really didn’t want to do any kayak or canoe designs, as there are already enough of them out there in the world, and one more wasn’t really needed. So here’s...

A leisurely craft from the Edwardian and Victorian eras - days of elegance on the Thames with parasols and wine! we were commissioned to design such a canoe, to be powered by a Gebofa electric 1.6 hp sail drive unit and constructed using modern clinker...

I decided to add this larger version of the Electric Moto Craft to my growing fleet of EMC hulls after a comment and request from one of my YouTube subscribers. He had been watching one of my how-to videos on building the 14ft version of the...

Electron was an interesting project done for a man who had done his homework on electric boats. In particular he had studied Doug Little's great book ELECTRIC BOATS. He wanted a cuddy cabin boat capable of some cruising, the ability to go about 30 miles...

For moving silently up remote quiet creeks and rivers to picnic amongst the Willows and enjoy country side not seen by many, we have designed this attractive electric canoe. Construction uses the strip plank process using computer faired mould shapes...

Free PDF Model to print, cut and build - click HERE I decided to add this smaller version of the Electric Moto Craft to my growing fleet of hulls after attending the first Electric Boat Show in Seattle, at the Center for Wooden Boats on Lake Union...

A lovely little skiff made from four sheets of 1/4’’ plywood using simple stitch and tape techniques. She has a fine entry for moving quickly and easily under electric outboard power (a conventional petrol outboard may also be used) with a stern wide...

A 20' Beaver sterned electric launch - for simplified plywood construction using pre-shaped ply fore and aft girders and frames which slot together to give the basic shape accurately. 20' Pup...

For printed plans, click HERE A kit for this boat is available from JO Woodworks. The idea was thought up by Dana Stovall. He built the boat from cheap ply and most of the framing was from recycled shipping pallets - a cheap build - done nicely...