Mast & Boom

Cast Jam Cleat

A Classic design in cast bronze or aluminum for you small boat (surface is a little rough, but that grips line well). Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Quick to use and release. *Suited well for...

5/16" Viadana Linked Ball Bearing Block

A traveler block is used to run a sheet through a block that itself runs on a rope horse.   Since 1961, Viadana has produced and supplied sailing outfits, while offering a long history of experience in research, design, manufacturing, and marketing...

Racelite Formed Tangs (Hounds)

Two of these stainless formed tangs constitutes a hound. The ones in the photo above are held together by a twist tie to show how they would be aligned in practice. Part No. Mast Size Strap Hole...

Curved Base Pad Eye

This curved base pad eye has a 7/16" diameter reinforced attaching hole and four 3/16" mounting holes. Stainless Steel

Potter 15 End Boom Sheeting System

This simple but effective system allows the Potter 15 to be sheeted entirely from the end of the boom, keeping the cockpit clear and the sheet right at hand. Package includes performance Ronstan blocks (one for boom and one for the traveler), and a...

B&B Aluminum Sailtrack

Extruded, anodised, aluminum B&B Custom Sailtrack Duckworks is pleased to offer a new custom sailtrack suitable for all sailboats small and large. This track has been designed by B&B and produced in the USA. Their goal with this track was to...

Racelite Stainless Mast Hounds

RL-425-H - RL-325-H Hounds are what you bolt to a mast to attach a wire stay to. These Race-Lite hounds are the ones made for various boat manufacturers. They are strong and solid. Part No. Mast Size Strap Hole...

West Wight Potter Factory Gooseneck

This is the factory West Wight Potter 15 and 19 gooseneck. It does not include any boom pieces, just what it pictured.

"Jack Tar" Spar Leather Kits

Protect your spars These spar kits were inspired by the Oar Leather Kits that we get from Rodger Swanson at Swanson Boat Company. The leather in each kit is 5-6 oz. top grain, vegetable tanned cow hide. Marine tallow is included as the...

Sailtrack Stops

black anodized aluminum and marine grade nickel plated brassChoose from:Round .50" dia. X .875" (13 x 22 mm)Flat .42 x 1 x .125" (11 x 25 x 3 mm)

Wood Parrel Beads

Hardwood - Three sizes These wooden beads will work great for parrels of all kinds. The 16mm (roughly 5/8") and 18mm (roughly 3/4") dia beads have 5/32" holes. The 25mm (roughly 1") dia beads have 7/32" holes.

Balch Boats "Stow-A-Way" Sail Tie System

Stow-A-Way® eliminates the need for all sail ties, is easy and convenient to use and self-stows under the boom until needed.Stow-A-Way® requires only simple tools and about 20 minutes to install, is made of high-quality materials and is an excellent...

Stainless Steel Sailtrack

Short sections of stainless steel sailtrack available for goosenecks that use it. Also for Jib sheet leads, Random mounting holes. 72 inches Max, please.

Racelite 3/4" Stainless Tangs

These tangs are made from 0.062" stock and have 3/16" dia holes in the ends. The hole centers are 3/8" from the ends. Nominal lengths are not from hole centers but total overall length.

Racelite Boom Crutch Holder

For fastening to aft cockpit bulkhead. Opening 2-3/4" x 3/4". Takes # 8RH screws.

Plastic Parrel Beads

6 Colors - 6 Shapes - Many Uses Cylinder - This is a good shape for a parrel, not traditional, but I can't see why it would not work just fine. Cube - Obviously this bead will NOT work! But it may have other uses. Let me know...

Racelite Stainless Exit Plates

Stamped stainless steel For use where a line or wire has to pass through a deck or spar Both plates are 1-1/4" x 2" x 1/16" thick. There are four holes for #8 fasteners and they will pass up to a 3/8" line, wire or rod. The RL-255C is curved to mount on...

Factory West Wight Potter 19 Mast Step with pins

This is the factory Potter mast step and will fit most years (some early models are different). The factory riveted the mast foot insode the mast, but 10/32 drill and tap works fine as well.

Racelite 1/2" Stainless Tangs

Stainless Steel These tangs are made from 0.062" stock and have 3/16" dia holes in the ends. The hole centers are 1/2" from the ends. Nominal lengths are not from hole centers but total overall length.

Factory West Wight Potter 15 Mast Step with pins

This is the factory Potter mast step and will fit most years (some early models are different). The factory riveted the mast foot insode the mast, but 10/32 drill and tap works fine as well.

Seadog Sailmaker's D-Shackles

Stamped 304 Stainless - Made in Denmark These shackles have many potential uses but their primary function is for use attaching sail slugs and slides to grommets. Part No. A B C Breaking Strength SD-140154 3/16" 1/2" 1-1/16" 2,640 lbs...

West Wight Potter 19 Factory Tangs

These are the factory West Wight Potter 19 tangs - Long tangs (6") and short tangs (3")

Racelite Vang Plates

Stainless SteelThe stainless plates are 1-1/2" x 3" x 0.062" with 3/16" mounting holes. The curved ones are intended for a boom that is 2-3 inches in diameter.The stainless cables are 1/8" diameter x 6" long. The diameter of the button is 5/16"

Boom Bails and Hangers

Lots of different sizes RL-333 Racelite Stainless boom bail is 1-1/8" wide but could be bent down to 1" or up to 1-1/2". Strap is 1/2" wide and .062" thick. Holes are 3/16"...

Boom Vang System for Potter 15 and 19

Boom vang system for Potter 15 or 19. Includes Ronstan block, combo V-jam block, shackle, 2 eye straps, and proper length of polyester double braid.

Ronstan Mast Hound

Suits mast dia.s between 76mm-115mm (3"-4 1/2") 316 Stainless Used for terminating wire rigging Wt. 3.9oz - 110g

Viadana 4 to 1 Boom Vang/Mainsheet

Viadana 4 to 1 Boom Vang. Ideal for mid-sized trailersailers like Catalina 22s and Com-Pac 23s. This high-quality hardware package includes all blocks and 40 feet of pre spliced 3/8" line. Would also make a nice 4 to 1 end boom mainsheet system. Safe...