Sea-Dog

Aluminum Vertical 4-Switch Panel

Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. Includes a sheet of 20...

Replacement Bushings for Seadog Premium Brass Oarlocks & Sockets

These are replacements for worn bushings in any of our premium brass oarlock sockets.

Seadog 10" Floating Winch Handle

All new, patent pending design is made by way of air assist injection molding instead of foam filled method, thus preventing any potential leakage of foam from within the handle. Features ball...

Seadog 4 Wire Inline Trailer Plug Tester

Nylon/StainlessIncludes cover to meet ABYC/USCG Requirements. Maximum Amps: 150. Maximum Volts: 48 DC.

Seadog 4" LED All Around Light

LED Fixed Mount All Around Lights are approved for USCG 2NM (Colreg 2 mile). 12 Volt DC.Company boilerplate:"LED Fixed Mount All Around Lights are approved for USCG 2NM (Colreg 2 mile). 12 Volt DC...

Seadog 4" Open Base Die Cast Cleat

These die cast chrome plated cleats are interchangeable with Perko® style 1210 cleats. Complete w/ galvanized studs, washers and nuts threaded into each leg of the cleat. This eliminates the need...

Seadog Adjustable Oar Collars-pair

Polypropylene oar collars will help protect your fine Shaw and Tenney's. Each set comes with a packet of brass nails. (note: will fit all of our oar locks EXCEPT the 2" galvanized ones.)

Seadog Aluminum Cleats

Cast Aluminum Aluminum tie-down cleats have a smoother finish than the iron, and are lighter if weight is a consideration Available in 4", 5", & 6" sizes  

Seadog Bakelite Terminal Blocks

Stamped Brass/Molded Bakelite/10 Amps terminals Part # Terms. A B C D E Fastener SD-426604 4 7/8" 11/16" 2-3/16" 1/4" 7/16" #4 RH SD-426608 8 7/8" 11/16" 3-11/16" 1/4" 7/16" #4...

Seadog Brass Cleats

Brass tie-down cleats are polished castings and very handsome. For the 3" and 4" cleats you have the option of ordering brass wood screws for mounting on drawers or cabinets. These are not...

Seadog Brass Double Coat Hook

Cast Brass coat hooks. Nice finish, made in China. A B C D E Fastener 1-1/2" 1/2" 2-11/16" 7/8" 1-9/16" #6 FH

Seadog Brass Drain Tube

When you use either our T-handle or Snap Handle plugs you will get better results if you glue one of these brass drain tubes in first. Order plugs separately. Cat No...

Seadog Brass Single Coat Hook

Cast Brass coat hooks. Nice finish, made in China. A B C D E Fastener 1-9/16" 1/2" 1-3/8" 1" 1-3/4" #6 FH

Seadog Bronze and Stainless Pelican Hooks

Quick release for rope or cable such as lifelines. These hooks are available in bronze or stainless variants.  Lately these have become popular for belts. Part No...

Seadog Bronze Boat Hook Head

Cast Brass coat hooks. Nice finish, made in China. Part# A B C SD-672800 8-1/4" 1-1/2" 1-3/16"

Seadog Cast Brass Strap Eye

These polished cast brass pad eyes can be used for a variety of applications both decorative and functional. Great for block attachment, controlling lead lines, or creating tie down points. Installs...

Seadog Deck Step

Injection Molded Rubber/Stamped 304 Stainless   A B C Fastener 2-1/4" 8-3/8" 7-11/16" #8 FH

Seadog Deluxe Lift Handle

A very nice cast brass handle. Similar to the Sea-Dog Heavy Duty Lift Handle but slightly lighter and less expensive.   Part...

Seadog Dual Battery Switch

Machined Brass/Injection Molded Nylon This is a typical two battery switch. It is handy for any boat with two batteries - usually where one is a starter battery and the other is a deep cycle battery...

Seadog Eye Bolt with Shoulder

Made of machined 304 stainless steel. These are much nicer than our regular eyebolts. Part# A B C D E B.S. SD-080466 6 mm-1 mm 3-3/8" 1/2" 2-5/16" 1" 3K Lbs. SD-080504 12 mm - 1.75...

Seadog Fender Hook

Investment Cast 316 Stainless Steel Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. For use with 5/16” line. Constructed of corrosion resistant...

Seadog Folding LED All Around Light

Injection Molded Nylon/Chrome Plated Zinc. LED Fold Down All Around Lights are approved for USCG 2NM (Colreg 2 mile). 12 Volt DC. Note: drawing is not proportional   Part...

Seadog Forged Brass Pad Eyes

These Pad Eyes are great for block attachment, controlling lead lines, or creating tie down points. Constructed forged brass wire. Installs with two FH fasteners (not included). Part...

Seadog Galvanized Angle Mount Oarlock Sockets

Sold as pairs. These oarlocks and sockets are made of maleable iron that is heavily galvanized by the 'hot dip' method. Some say they are better than Bronze or stainless. They are certainly less...

Seadog Galvanized Iron Cleats

Cast Iron, Hot dip galvanized Part# A B C D Fastener SD-040103 3...

Seadog Galvanized Round Oarlocks

These oarlocks and sockets are made of maleable iron that is heavily galvanized by the 'hot dip' method. Some say they are better than Bronze or stainless. They are certainly less expensive. Sockets...

Seadog Galvanized Screw Pin Anchor Shackle

Forged, then hot dipped galvanized SD-147804, SD-147806, SD-147808 Part No. Size A B C D Weight SD-147804 3/16" 1/4" 3/8" 9/16" 13/16" .04 lb...

Seadog Galvanized Top Mount Oarlock Sockets

Sold in pairs.   These oarlocks and sockets are made of maleable iron that is heavily galvanized by the 'hot dip' method. Some say they are better than Bronze or stainless. They are certainly...

Seadog Halyard Cleat

Nylon construction with stainless steel mounting plate. Designed to mount on any 3/16" - 5/16" diameter shroud and used for tying off a halyard when not in use. Additional uses include mounting...

SeaDog Halyard D Shackle

                          A               B        C      ...

Seadog Hatch Adjusters, knob type

These hatch adjusters are made from 304 stainless steel and glass filled Nylon. They telescope to open or close hatches, windows, shelves, or tables and are held in place by tightening the knob...

Seadog Hatch Adjusters, twist type

These hatch adjusters are made from 304 stainless steel and glass filled Nylon. They telescope to open or close hatches, windows, shelves, or tables and are held in place by twisting the collar...

Seadog Heavy Duty Nylon Cleats

Heavy duty black nylon tie-down cleats. They are resistant to salt and sun, and will outlast your boat. Available in 4.5, & 6.25" sizes

Seadog Heavy Duty Zinc Plated Steel Oarlocks

These utility oarlocks are good for beginners as they hold the blade in position. They will clamp onto a shaft from 1-1/4 to 1-3/4 inches in diameter without modification. Mild steel construction...

Seadog Heavy Stainless Steel Pad Eyes

Forged 304 Stainless Heavy duty wire forged pad eyes. AISI 304 Stainless Steel. Part # A B C Fastner Wt. SD-081200 5/16" 3/8" 1-3/8" #8 FH .03 lb...

Seadog Illuminated 4 Fuse/Switch Panels

Fire Resistant Injection Molded Nylon/with Illuminating Switches Panel rating: 12 volt, 37 amps total. Individual circuit: 10 amps maximum. Meets CE specifications. All panels take standard glass...

Seadog Illuminated 6 Fuse/Switch Panels

Fire Resistant Injection Molded Nylon/with Illuminating Switches Panel rating: 12 volt, 37 amps total. Individual circuit: 10 amps maximum. Meets CE specifications. All panels take standard glass...

Seadog Instrument Panel Decal Sheet

The label decals that come with our Sea-Dog Fuse/switch panels are not very comprehensive. This decal sheet has many more options. Here is a list of the tags:AC MAIN SHORE BILGE PUMP AIR COND. BOW...

Seadog Jaw & Jaw Turnbuckles

Machined 316 Stainless Each Sea-Dog Stainless Turnbuckle is made from AISI 316 stainless steel and features an electropolished bright finish at no additional cost. All thread sizes and wire rope...

Seadog LED Combination Bow Light

Stamped 304 Stainless/Injection Molded ABS - 12 Volt DC. These quality LED combination bow lights are approved by the Coast Guard and have a much lower power requirement than incandescent ones. No...

Seadog LED Port and Starboard Navigation Lights

Stainless Steel (above)or Black (right) finish - 12 Volt DC. Now you don't have to worry about converting standard nav lights to LED. The LED's actually emit red or green light. This makes them...

Seadog LED Utility Light

More of a courtesy light than anything. This little LED lights amber and uses an incredibly small abount of electricity. Hook directly to 12 volt source to light the cabin of your little cruiser...

Seadog Nylon Angled Oarlock Socket

Injection Molded Nylon. The reason we are offering these singly rather than as a pair is that they would be ideal, I think, to mount on a transom for a sculling oar. The socket is heavily built and...

Seadog Nylon Bow Chocks, pair

Injection molded Nylon - these are economical alternatives to our Stainless Bow Chocks. Part# A B C D Fastener SD-067360 4-1/2" 7/16" 1/2" 3-5/8" #10FH

Seadog Nylon Cleats

Your basic black nylon tie-down cleats. They are resistant to salt and sun, and will outlast your boat. Available in 3" ,4", 5", & 6.5" sizes  

Seadog Nylon Fairlead with SS Liner

All Sea-Dog Nylon Fairleads are designed with a molded-in recess in the base. This traps the sealant in place providing a more watertight seal. The 082615 Sea-Dog fairlead has a stainless steel liner...

Seadog Nylon Fairleads

Injection Molded Nylon All Sea-Dog Nylon Fairleads are designed with a molded-in recess in the base. This traps the sealant in place providing a more watertight seal. The SD-082010, SD-082051, and...

Seadog Nylon Flange Type Screw-in Drain Plug

These Drain Plugs are designed with a molded-in recess in the base, thus trapping the sealant in place and providing a more water-tight seal. They also have a captive mechanism that keeps the plug in...

Seadog Nylon Flange Type Screw-in Drain Plug 1

These Drain Plugs are designed with a molded-in recess in the base, thus trapping the sealant in place and providing a more water-tight seal. They also have a captive mechanism that keeps the plug in...

Seadog Nylon Press Fit Screw-in Drain Plug

These Nylon drain plugs are designed to fit securely in a 1" hole without the use of fasteners. The ridges on the body of the Drain Plug are designed to keep the plug in place. Sealant should be...