Dinghies

Over the years I have often been asked about the design for a nesting dinghy. The Skylark pram dinghies have often been split at their centre frame and built with 2 frames back to back so that the forward end fits into the aft end and this has worked...

 The Shelduck Duck Punt is a simple plywood punt suitable for river and canal rowing and some quiet fishing. Although she has the flat bottom of the Eider Duck punt, she is double ended like the Ruddy Duck punt.Construction is stitch and tape...

  The Sandolo is a traditional flat bottomed rowing boat used in Venice and the Venetian Lagoon and unlike the Gondola is, like most craft, symmetrical about it's centerline. In fact it is of a simple flat bottomed, single chine shape with...

This new design is based on the Mark 1 single chine version of the Rhum 11'6" general purpose dinghy. The original Rhum has been extended by 12" which gives more space for her to be fitted out as a proper camping dinghy with space for a sleeping area and...

Oarsome Chance came to me for the design of a 24' Coastal Rowing Skiff which could be more easily used as a multi-role boat and which was safer for use offshore. Instead of a double ended design, often used for this role, we went for a transomed design...

This is the Selway Fisher version of the lovely Whitehall Skiff. The origins of the Whitehall Skiff (or pulling boat) are a little vague - some say that her design came from some of the small workboats around Whitehall in London but others trace her...

This design is based on a double ended version of our 12' 4" Petite Brise Swampscott dinghy. Swampscotts as a breed usually have a narrow 'tombstone' transom making them more or less double ended (semi Swampscott dorys have a wider transom) - when...

The Thames 32 has primarliy been designed for Foam Re-inforced Plastic (FRP) construction - the plans give details of the male plug (so that a female mould tool can be made) which can also be built as a finished wood hull. The wood hull can be built...

This is the first of a new line of dinghies and dories which combine traditional looks and performance with quick and easy methods of construction. We have been able to modify the normal clinker plank shapes for this boat so that they can be stitched...

I have now updated one of the first Selway Fisher designs, the Highlander 7'6". The original design was drawn up in the 70's well before computers and boat design software was available - so the design started with a carved half model from which the...

Designed for a client who wanted a simple stackable fishing dinghy which he could easily carry himself, the Doracle uses just 2 sheets of 4, 5 or 6mm ply. She may be built in 2 pieces with the forward piece stacked inside the aft section. The 2 halves...

The concept of the Northumbrian 10'6" came from the need to have a sturdy and very seaworthy small working dinghy which could be rowed, sailed and motored easily and which would weigh no more than 70 lbs or so. She also had to have a striking appearance...