null

Paul Fisher

  • 15' American Peapod Plans

    15' American Peapod Plans

    This is a beautiful double ender for simplified strip plank and epoxy construction. Temporary moulds are set up with pre-shaped stem, stern post and hog and then the boat is planked with thin strips...

    $74.00
    Choose Options
  • 15' Electric Skiff Plans

    15' Electric Skiff Plans

    A lovely little skiff made from four sheets of 1/4’’ plywood using simple stitch and tape techniques. She has a fine entry for moving quickly and easily under electric outboard power (a...

    $74.00
    Choose Options
  • 15' Fisher Prospector Plans

    15' Fisher Prospector Plans

    Our 15' 8" Fisher Prospector is our most popular canoe design (go to Open Canoes 15'-17'). This new version has been requested by a client who wanted a similar canoe, slightly shorter and with 7...

    $61.00
    Choose Options
  • 15' Hazel Guide Bateau Plans

    15' Hazel Guide Bateau Plans

    Based upon the American Adironack guide boat, this craft combines traditional lapstrake (clinker) construction with modern materials. The bottom is a flat piece of 3/8’’ ply slightly...

    $74.00
    Choose Options
  • 15' Huntsman Plans

    15' Huntsman Plans

    The 15' Huntsman is a simple 2 planks per side open canoe with a V bottom and single chine making construction fast with the stitch and tape construction method. The canoe can take 2 adults and more...

    $61.00
    Choose Options
  • 15' Kestral Peapod Plans

    15' Kestral Peapod Plans

    Kestral is a beautiful 15' Peapod type craft with four planks per side. The drawings give the plank shapes for simple stitch and epoxy construction but she could either be strip planked or built...

    $115.00
    Choose Options
  • 15' Lobster Boat Plans

    15' Lobster Boat Plans

    This motorboat is based on a typical Maine Lobster boat and has been designed for strip plank construction (although she could be built using clinker/ply techniques using the same moulds). The hull...

    $27.00 - $135.00
    Choose Options
  • 15' Mandarin Rowing Skiff Plans

    15' Mandarin Rowing Skiff Plans

    This design is a 15' version of the 17 footer - the beam is the same at 45" and she has a single traditional oarlock. She uses just 5 sheets of 4, 5 or 6mm plywood and the plans give details so that...

    $122.00
    Choose Options
  • 15' Marathon Plans

    15' Marathon Plans

    The Marathon series of open canoes started with the Marathon 18 which was designed as a fast long distance canoe for a crew of 2 who would use her to race and portage around locks etc - so good...

    $61.00
    Choose Options
  • 15' Medway Doble Plans

    15' Medway Doble Plans

    We were asked by a Portuguese client to stretch our standard Medway Doble to produce an easily rowed craft which could be carried under the bridge deck of a large cruising catamaran and used both as...

    $27.00 - $135.00
    Choose Options
  • 15' Northumbrian Coble Plans

    15' Northumbrian Coble Plans

    At long last here is a larger addition to our Northumbrian Coble range—at 15’ LOD, she is a big handsome dayboat with space to accommodate the family plus camping gear and stores. The...

    $27.00 - $203.00
    Choose Options
  • 15' Outboard Motor Canoe Plans

    15' Outboard Motor Canoe Plans

    This 15' (4.58m) design is an extended version of our 12'6" Outboard Motor Canoe and uses the same basic hull shape with it's narrow flat bottom panel with 3 further panels added each side to form an...

    $68.00
    Choose Options
  • 15' Rascal Motor Dory/Skiff Plans

    15' Rascal Motor Dory/Skiff Plans

    This is a simple and very easily built motor dory for use with outboards up to around 50 hp in size. She can either be made by wrapping the pre-shaped sides around the frames, fastening on an...

    $68.00
    Choose Options
  • 15' Trican Motor Canoe Plans

    15' Trican Motor Canoe Plans

    The client who asked for this design, Jim Ferguson (who has sadly now passed on), wanted a design that could be used in a number of ways - a true multi-role craft for use in Australian waters. The...

    $100.00
    Choose Options
  • 15' V Bottomed Ruddy Duck Punt Plans

    15' V Bottomed Ruddy Duck Punt Plans

    The Ruddy Duck has been based upon our simple flat bottomed Eider Duck Punt. We were asked to alter her for more serious rowing by a crew of 2 so we went for a double ended hull shape with a ‘V’...

    $81.00
    Choose Options
  • 15'1" Port Pegasus Plans

    15'1" Port Pegasus Plans

    The Port Pegasus is a clinker boat which may be used as a pure rowing boat or fitted with a small diesel (ie Farymann 7.5) as a small motor launch with classic appearance.   As a general purpose...

    $27.00 - $162.00
    Choose Options
  • 15'10" Wren Plans

    15'10" Wren Plans

    The WREN is typical Canadian canoe built using the stitch and tape ply method. Her design was based upon an original Indian bark canoe and simplified for ply construction but without loosing the...

    $68.00
    Choose Options
  • 15'2" Oarsome Plywood Skiff Plans

    15'2" Oarsome Plywood Skiff Plans

    The Oarsome 15'2" skiff has been designed for the Oarsome Chance Foundation as a simple stitch and tape ply skiff. Oarsome Chance focuses on young people aged from 9 -19 years old who are...

    $128.00
    Choose Options
  • 15'4" Fly Fishing  Coble Plans

    15'4" Fly Fishing Coble Plans

    This design has been based upon our Northumbrian Coble designs - the client wanted a very stable seaworthy design mainly for outboard power but which could also be rowed and take a sail plan. Basic...

    $135.00
    Choose Options
  • 15'6" Beaver Canoe/Skiff Plans

    15'6" Beaver Canoe/Skiff Plans

    The BEAVER is an ultra modern open canoe skiff using the latest methods of construction to make building time as short as possible. She has the same shape at both ends and each half of the boat is...

    $68.00
    Choose Options
  • 15'7" Carrick Asymmetric Racing Plans

    15'7" Carrick Asymmetric Racing Plans

    The Carrick open canoe was designed for Tyrone Boats specifically for sail racing. She is certainly fast but is also very handy when paddled. She has 5 planks per side giving her a nicely rounded...

    $68.00
    Choose Options
  • 15'7" Peterborough Plans

    15'7" Peterborough Plans

    The name ‘Peterborough’ was often used to describe any open Canadian type canoe but more especially those with a lightly rockered hull which had a moderate beam and some tumblehome. Our example...

    $68.00
    Choose Options
  • 15'7" Raven Plans

    15'7" Raven Plans

    Adrian Cabedo (see the Wren) came back to us for a second design. He wanted a slightly more sophisticated design, still of the Canadian type, for long distance portaging and camping in Spain. Basing...

    $68.00
    Choose Options
  • 15'8" Fisher Prospector Plans

    15'8" Fisher Prospector Plans

    This is the Selway Fisher version of an old favourite - the Prospector type open canoe. The original Prospectors were originally designed in Canada and known as the "workhorse of the North". They had...

    $68.00
    Choose Options
  • 15'8" Seafox Plans

    15'8" Seafox Plans

    The Seafox is a development of our Seawolf design using 4 planks per side rather than 2 giving a well rounded and very attractive hull shape. she has storage and buoyancy areas fore and aft and a 3'...

    $61.00
    Choose Options
  • 15'8" Strip Planked Prospector Plans

    15'8" Strip Planked Prospector Plans

    A Strip Planked version of our most popular design - the Fisher Prospector Open canoe - plans include full-size templates for the moulds and the sail plan of the FP16. 15'8" Strip Planked...

    $81.00
    Choose Options
  • 15'9" Drift Boat Plans

    15'9" Drift Boat Plans

    Drift boats are usually used in tricky rivers with fast running currents and rocky passages for fly fishing. The oarsman sits aft, facing forward and uses the oars to manoeuvre the boat round rocks...

    $101.00
    Choose Options
  • 16' Bourne Runabout Plans

    16' Bourne Runabout Plans

    The 16' Bourne runabout is partly based on the Egret but with a forward raking transom and a fair amount of tumblehome in the aft quarters. She uses the same ply skin over a slotted together ply...

    $27.00 - $169.00
    Choose Options
  • 16' Cambridge Punt Plans

    16' Cambridge Punt Plans

    We were asked by the Ibis Boatworks to develop a traditional punt for lake use which would have a length that would come out of 2 sheets of plywood - so we used the 20’ Cambridge Punt (page DA13)...

    $61.00
    Choose Options
  • 16' Cape Cod Semi Dory Plans

    16' Cape Cod Semi Dory Plans

    The Cape Cod is a motor dory based upon the Swampscott model with it's flat but rockered bottom panel and 4 planks per side. Unlike the sailing Swampscott, the bottom is kept fairly wide aft so that...

    $101.00
    Choose Options
  • 16' Casco Bay Canoe Yawl Plans

    16' Casco Bay Canoe Yawl Plans

    The Casco Bay 16 was designed for Maurice Byrne of the Boatyard Upstairs for a Swiss client who wanted a fast, easily handled canoe yawl for use on his home lakes. We have developed an efficient and...

    $27.00 - $176.00
    Choose Options
  • 16' Curlew Motor Punt Plans

    16' Curlew Motor Punt Plans

    This is a very simple stitch and tape design using 5 sheets of 9mm (3/8") ply with pre-shaped hull panels and transoms. With a beam of 4'6" and a mid depth of 16" she has plenty of room for fishing,...

    $81.00
    Choose Options
  • 16' Dutch Punter Plans

    16' Dutch Punter Plans

    The traditional Punter is a small Dutch work boat with a simple single chine and flat bottomed hull and an upper strake which is shaped to give tumblehome. Her sprit rig is very practical allowing...

    $27.00 - $371.00
    Choose Options
  • 16' Egret Runabout Plans

    16' Egret Runabout Plans

    The Egret is a slightly simplified form of the Classic runabout - she has a plywood hull which can be overlaid with Mahogany veneer and teak decking to give a classic look. She has tumblehome aft...

    $27.00 - $169.00
    Choose Options
  • 16' Felix Launch Plans

    16' Felix Launch Plans

    Our Felix 13’ was lengthened to 15’ and the beam increased to accommodate batteries for electric power and now this design has been lengthened a further 12” and the beam increased by 6” and...

    $34.00 - $243.00
    Choose Options
  • 16' Fisher Swampscott Plans

    16' Fisher Swampscott Plans

    We have had many requests for a longer version of our Fisher Swampscott 12 dinghy/dory, so here she is. At 16’ we have designed her to be considerably heavier than her smaller sister, although...

    $27.00 - $203.00
    Choose Options
  • 16' Goshawk Plans

    16' Goshawk Plans

    The Goshawk was designed for an American company for use in their boat hire business. The design brief called for a boat which was tough and which, for only a 16' length, would have as comfortable a...

    $34.00 - $236.00
    Choose Options
  • 16' Grey Swan Plans

    16' Grey Swan Plans

    The Grey Swan is a traditional gaff cutter of multi chine hull shape with a length over deck (LOD) of only 16’ allowing much of her construction to be completed in a small work space. The original...

    $34.00 - $236.00
    Choose Options
  • 16' Hazelnut Clinker Canoe

    16' Hazelnut Clinker Canoe

    The 16' Hazelnut is based on the 17' version but has been drawn up with the clinker/ply construction method in mind using a building jig and moulds to gain the plank shapes. She has 5 planks per...

    $88.00
    Choose Options
  • 16' Iona Skiff Plans

    16' Iona Skiff Plans

    For those who want to build a classically designed double ended clinker craft, this boat has been developed from the Shetland Skiff and North American Peapod dinghy. Construction is greatly...

    $27.00 - $122.00
    Choose Options
  • 16' Islay Skiff Plans

    16' Islay Skiff Plans

    The Islay is a recent development of our Iona design for a client who required a graceful boat with more beam and a little more sheer. He also wanted a traditional cutter rig with a jaunty looking...

    $27.00 - $162.00
    Choose Options
  • 16' Kane & Able Plans

    16' Kane & Able Plans

    For something quite a bit larger Kane and Able are two separate Suffolk Beach punts. Both have the same overall length, beam and arrangement. Kane is built using the clinker ply method and computer...

    $27.00 - $203.00
    Choose Options
  • 16' Koa Hawaiian Fishing Canoe

    16' Koa Hawaiian Fishing Canoe

    This design is a modern interpretation of the traditional Koa fishing canoes which were 'dugouts' and made from a single log. The hull has a narrow flat bottom with 4 planks per side - the top hull...

    $115.00
    Choose Options
  • 16' Mystery Plans

    16' Mystery Plans

    16’x 6’4’’x 8’’ (3’6’’ with board down). Approx. 450 lbs. lightweight with 120 lbs. of ballast. An ultra simple cruiser of double chine shape using pre-shaped ply panels for the...

    $27.00 - $122.00
    Choose Options
  • 16' Pete Plans

    16' Pete Plans

    This is the Selway Fisher version of an old favourite - the Prospector type open canoe. The original Prospectors were originally designed in Canada and known as the "workhorse of the North". They...

    $68.00
    Choose Options
  • 16' Petite Brise Plans

    16' Petite Brise Plans

    The 12’4’’ Petite Brise has proven to be very popular and we have had several requests for a longer version, so we have gone for a hull length of 16’ and increased the beam to...

    $27.00 - $203.00
    Choose Options
  • 16' Pipit Hampton Flattie Plans

    16' Pipit Hampton Flattie Plans

    The Pipit has been modeled on the old Hampton type "Flattie" which has a flat bottom over most of it's length running into a moderate "V" aft towards the transom. The bottom also has a reasonable...

    $27.00 - $176.00
    Choose Options
  • 16' Port Sorell Rowing Skiff Plans

    16' Port Sorell Rowing Skiff Plans

    The Port Sorell 16 is a skiff for rough waters having generous freeboard and fairly full sections fore and aft. This means, that for her type, she is a good load carrier and can be rowed single or...

    $135.00
    Choose Options
  • 16' River Lapwing Catboat Plans

    16' River Lapwing Catboat Plans

    This is a curvaceous and neat example of the traditional American catboat. She has been designed to give maximum usability and space in a 16' long package. There is plenty of room for storage and...

    $27.00 - $216.00
    Choose Options
  • 16' Robin Plans

    16' Robin Plans

    The ROBIN is a design requested by a client who had already built one of our Wren stitch and tape ply canoes and who wanted a similar craft in strip planked construction with a sweet round bilge...

    $81.00
    Choose Options