Highlander 19'6" Plans

This boat is a stretched version of the Highlander 18 for a client who wanted the biggest boat that he could comfortably trail extensively behind a medium sized family saloon without a lot of effort...

Highlander 23 Plans

At last, a bigger Highlander dayboat - so really a pocket cruiser or small yacht. She has been drawn up for clinker ply construction over a framework of ply girders and bulkheads but the hull planks...

Highlander 7'6" Mk2 Plans

I have now updated one of the first Selway Fisher designs, the Highlander 7'6". The original design was drawn up in the 70's well before computers and boat design software was available - so the...

Highlander 9' Plans

Because most of our designs have their offsets and panel shapes stored on the computer, altering a particular design to suit a clients individual requirements of length, beam and draft, can be...

Hinton 15M Plywood Barge Plans

This is a simple barge with flat bottom single chine shape and a "swim" shaped stern (under the waterline similar to narrow boats). The bow would be vertically staved plywood in 2 or 3 overlapping...

Howth Head 22 Plans

The Howth Head is a plywood version of the steel Lambay Island design. Like the Lambay, she is a 22' motor boat with a large cockpit area and comfortable accommodation with 2 large berths, w.c...

IC10 International Canoe Plans

The IC10 - a ply stitch and tape "B" Class International Canoe for Mr. Peter Rhodes-Dimmer - the first hull has been constructed by Alan Powell. The major idea behind this design was to produce an...

Inishmore 10 Plans

The Inishmore is one of a number of strip planked designs that we have enabling the builder to finish up with a beautiful round bilged craft of light weight. The Inishmore is a lovely strip planked...

Jarvis 17 Plans

The Jarvis 17' motor launch has been drawn up for clinker/ply construction - a building jig is made which consists of chipboard mould shapes mounted on a strongback. Ribbands (stringers) are...

Jarvis 21 Plans

Below are photos of Tim Thedon's Jarvis 21 under construction.               21' Jarvis Particulars LOA 21'4" 6.52m Beam (excl...

JC10 Plans

The JayCee was conceived with Tyrone Boats as a trainer for the International Canoe. The idea was to produce a craft which was based upon low cost, easy building techniques and which would be an...

Kari 2 Faering Plans

We were asked to develop the plank shapes for a replica of a 4 oared Faering from some lines that had been taken off the boat some while back. The client was the husband of the Great Granddaughter...

Kari 24' Norwegian Faering

The Kari 24' is based on the Kari 2 which, itself, was based on the lines taken off the original Kari Faering. In the case of this new 24' design the client wanted a rounder hull with slightly harder...

Kingfisher14 Plans

Paul Fisher designed the Kingfisher for Jack Chippendale of Chippendale Craft Ltd as a large roomy dayboat for the family which could be built from a kit or from plans in an average sized garage...

Lambay Island 22 Plans

This is a 22' motor boat with a large cockpit area and comfortable accommodation with 2 large berths, w.c. compartment and galley with dining space. The drawings are originally for steel...

Loddon 20' Strip Planked or FRP Skiff Plans

The Loddon 20 is round bilged and can be made using foam sandwich (FRP) and strip plank Cedar construction methods. The moulds, transom and inner stem shape. She is designed for 2 or 3 rowing plus a...

Lynx 14 Plans

The Lynx 14 is a very modern pocket cruising boat designed to give comfortable over night sleeping accommodation in a short boat length. She has been designed for a client who intends to use her for...

Lynx 16 Plans

The LYNX 16 has been designed to meet the needs of the sailer who requires a modern small trailable boat. To retain the maximum possible internal living space she has twin bilgeboards which are...

Martlet 30 Gaff Cutter Plans

This is a design commissioned by someone who built one of our clinker ply Kane Suffolk Beach Punts and who wanted a safe, comfortable deep water cruising yacht which could also find it's way up...

Medway Doble 12'6" Plans

The Medway Doble was drawn up for Mr. John Lidstone who, having already built one of our Highlander dayboats, wanted a lightweight, car toppable craft of double ended shape suitable for river...

Micro 8 - Mini Yacht Plans

This design has been drawn up for the same client who asked us to design the Simplicity 14 a number of years ago - this new design is to cater for the sailors who like to sail long distances in the...

Micro18 Plans

This project presents the amateur builder with little more difficulty than building an Enterprise dinghy. She is of multi-chine configuration with pre-shaped bottom, hog and bulkheads for quick...

Morning Tide 14 Plans

The Morning Tide 14 is a modern stitch and tape version of the old heavy displacement pocket cruisers that were popular in the 30’s and 40’s. By using modern construction techniques...

Mylor 27' Strip Planked Fishing Boat Plans

A 27' Fishing Boat for Mr. J. Clarke - this is a high volume strip planked fishing boat of modern proportions - the drawings are for the hull construction only - the mould shapes are computer faired...

Nordia 10 Plans

This design is for a Norwegian who's brief was for a fast offshore and ocean cruising yacht which would incorporate an ample aft cockpit as well as a comfortable inside steering position with bunks...

North Pacific 60 Plans

The North Pacific 60 is a long range comfortable cruising yacht. Designed originally for a client in Hong Kong for use in the Philippines she has a wide beam and relatively shoal draft with a...

Oxford Strip Planked Sailing/Rowing Skiff Plans

A strip planked skiff for Mr. P. Hobbs with a simple lug rig - the hull is based on a traditional Thames skiff with it's slender and graceful shape ending in an attractive "wineglass" transom. She...

Petrel 13' Catboat Plans

13’x 6’x 8‘‘(2’9’’ with board down). A miniature cat boat of traditional design given modern construction techniques. Using the stitch and tape method with...

Pioneer 21' Dory/Sharpie Plans

In this design a client asked for the largest and safest single handed offshore yacht that he could get on a very limited budget. For your money. a dory or sharpie gives you more length per...

Power 1 Plans

16'x5'6" ply motor launch of ultra simple construction using pre-shaped ply hull panels, frames and transom. The chine joints are completed with epoxy resin fillets and tape making construction quick...

Power 1.2 Plans

The Power 1.2 is a development of our Power 1 design. She has increased beam and the chine has been lowered to give a more stable shape so that her side decks can be used comfortably. The drawings...

Power 1.3 Plans

The Power 1.3 is a development of the original Power 1 design. In this case, we were asked to produce a simply built hull with more capacity and suitable for offshore and estuary conditions. We have...

Power 14 Plans

The hull for this launch was originally based on our Power 16 model but instead of going for a simple flat bottom panel, we have used a 'V' bottom shape. Whilst this makes construction time a little...

Power 2 Plans

A 21' x 7' bigger sister to the Power 1 design using the same easy construction method and having a similar double chine construction with a flat bottom panel simplifying her building and producing...

Power 2.2 Plans

This craft is a widened and a more sophisticated version of our Power 2 design. The bottom panel has been slightly veed to give a softer ride and her depth has been increased. This along with her...

Power 225 Motor Cruiser Plans

The Power 225 is based upon the "U" shaped hull section of our Power series of motor boats. At present we have the hull panel, frame shapes and construction details for an aluminium version of this...

Power 3 Plans

Soon after our Power 2.2 left the drawing board, we were asked to extend it and produce a design which, in a compact form, could accommodate a large aft cabin with a central wheelhouse and...

Power 4 Plans

After many requests, we have extended the simple concept of the Power 1 and 2 motor launches to a length of 32' with a beam of 10'9". At the moment, the drawings for the hull and deck construction...

Ptarmigan 15 Plans

This is a new design for a Mr. Mussett who wanted a boat as easy to build as the Petrel design but which could be left on a mooring and occasionally trailed and which would be ideal for sailing...

Ptarmigan 17' Plans

The 6’ beam version of the Ptarmigan 15 is quite popular and now we have extended the whole design to 17’x6’11’’. Although only 2’ longer than her...

Pup - 20' Beaver Sterned Electric Launch Plans

A 20' Beaver sterned electric launch - for simplified plywood construction using pre-shaped ply fore and aft girders and frames which slot together to give the basic shape accurately...

Rathlin 20 Motor Yacht - Motor Sailer Supplement

Note: This supplement allows a builder of the Rathlin 20 Motor Yacht (described below) to build it as a Motor Sailer. You must have both the Rathlin 20 Motor Yacht plans and this supplement...

Rathlin 20 Motor Yacht Plans

For Motor Sailer Supplement Click HERE Our Rathlin design is not the type of motor yacht that you would normally see these days as a new ‘‘modern’’ design. Most new craft...

Rhum 11'6" Plans

This is a very simple 11’6’’x5’ ‘V’ bottomed dinghy for general purpose use. Her ‘V’ bottom and 5’ beam gives her both stability and a good turn...

Rhum 12.3 Plans

This new design is based on the Mark 1 single chine version of the Rhum 11'6" general purpose dinghy. The original Rhum has been extended by 12" which gives more space for her to be fitted out as a...

Rockland 11' Plans

This dinghy was developed from our Skylark Mk 2 series of pram dinghies. The dinghy retains the flat, rockered bottom panel and the side panels are round bilge in shape and are either cold moulded...

Rose 15'3" V Bottomed Plywood Launch Plans

For those wanting an elegant traditional looking launch to go with their steam plant but which is relatively quick to build. Rose has a ‘V’ bottomed plywood hull which uses stitch and...

Rose 17'9" Launch Supplement

Note: This supplement lets you use the Rose 15'3" plans to build a 17' 9" version described below. You need the Rose 15" 3' plans as well as this supplement.___________________________For those...

Ruby 19 Plans

The Ruby 19 is based on our Ruby 22 double chine plywood steam launch. In the case of the Ruby 19 a client wanted a shorter version of the 22 to be built in steel which meant widening and deepening...

Ruby 22' Double Chine Plywood Launch Plans

For those steam enthusiast who want an elegant 22’ steam launch of Edwardian profile but who do not want to spend the time and additional cost of producing a strip planked hull, we have...