Paul Fisher

Smaller sister to the Edwardian 26, the hull of this version has also been based upon the Lifu launch. Her lines have, however, been further deepened so that she can also take the weight of...

This 12' x 4' rowing/sailing skiff was designed for Mr. M. Goodger who wanted a light, seaworthy skiff which would row well and optionally take a modest 35-50 sq ft sail. The attractive 5-plank hull...

The Cape Cod is a motor dory based upon the Swampscott model with it's flat but rockered bottom panel and 4 planks per side. Unlike the sailing Swampscott, the bottom is kept fairly wide aft so that...

With the number of hulls modeled on our YachtCAD system, this launch demonstrates our ability to quickly design a craft which embodies features from a number of other craft in order to meet the...

The Skylark 12 is capable of having a small cuddy fitted forward for protection and shelter or simple dry storage of gear. Side benches can be fitted with storage or buoyancy under and the whole boat...

This is a simple barge with flat bottom single chine shape and a "swim" shaped stern (under the waterline similar to narrow boats). The bow would be vertically staved plywood in 2 or 3 overlapping...

The sporty 14’ single kayak (now in it’s mark 2 version) has a beam of 24’’ and a ‘V’ bottomed soft chine shape giving plenty of stability with a very...

The Bocar 8 is born out of a wish to get even! A couple of years ago I was asked to design a 6' dinghy which would form the lid of a car roof box. I duly did this but received no Royalties - the...

The Baby Raven is a smaller version of the Raven canoe and has a similar midship shape with tumblehome—this puts the maximum beam down at the waterline maximizing stability whilst at the same time...

Although only 6' long we have given her good internal volume with a beam of 3'8". This gives plenty of buoyancy in the ends of the boat so that she does not exhibit the usual tippiness of craft of...

The Tasman is a multi-chine plywood yacht designed for long distance sailing for 2 crew, which uses an egg-box frame system of plywood fore and aft girders slotted together with plywood bulkheads -...

A lovely little skiff made from four sheets of 1/4’’ plywood using simple stitch and tape techniques. She has a fine entry for moving quickly and easily under electric outboard power...