Paul Fisher

The Dart 16 double kayak has a soft ‘U’ shaped bottom running into flared ‘V’ sections fore and aft with a chine, giving a very stable shape. She has a large 7’ long...

The additional 1'4" hull length over the original 14' version gives a lot of useful additional space - enough for 2 comfortable berths, a small galley area and curtained side space for a Porta Potti...

This is a 14’ (4.27m) x 4’2” (1.27m) stitch and tape/clinker/ply Thames Skiff – similar to our Thames 12 skiff - for Mr. B. Lammerton - she retains the same...

The Port Pegasus is a clinker boat which may be used as a pure rowing boat or fitted with a small diesel (ie Farymann 7.5) as a small motor launch with classic appearance.   As a general purpose...

16’x 6’4’’x 8’’ (3’6’’ with board down). Approx. 450 lbs. lightweight with 120 lbs. of ballast. An ultra simple cruiser of double chine shape...

Plans are now available here for the double ended St.Bronagh skiff designed for Tyrone Boats for coastal rowing - she has a low wetted surface area hull capable of excellent performance in offshore...

The Power 1.3 is a development of the original Power 1 design. In this case, we were asked to produce a simply built hull with more capacity and suitable for offshore and estuary conditions. We have...

This launch has been designed for diesel propulsion (10-15 hp) but she can also take steam or electric propulsion. The layout drawn for her is a simple open thro' plan with no obstructing bulkheads...

Apparently, "Toshing" was the taking of copper from laid-up warships. We have used the Mevagissey Tosher as the model for this boat. They were renowned for their speed and sea keeping qualities and...

This design is based upon the traditional daysailers and small yachts that can be hired on the Norfolk Broads. Construction is Cedar strip planking over computer faired moulds/jig. The mast is...

Most East Coast Cobles were of clinker (lapstrake) construction but a few were carvel and the 27’ Northumbrian Coble emulates one of these by using modern strip planked construction. I have not...

19’6’’x 5’8’’x 11’’ (min.). May be built in two halves and bolted together as a fishing/motor dory or as a sailing dory with or without the cubby/cabin...