Paul Fisher

21'8" x 6' x 3' (mid-depth) Drontheim Yawl for the Causeway Coast Kayak Assoc. - this is a traditional Irish open yawl and we have been asked to model her on the computer and develop the 9 hull...

Designed along the lines of a traditional 1930's runabout with rounded tumblehome to the topsides at the transom, the drawings detail her for construction using computer generated frames/bulkheads,...

This is a smaller version of the Avon 22 multi role boat for a client who wants a light easily transported boat for use around the coast of Anglesey which is efficient under outboard power but which...

Very much on the lines of the American Cat Boat, we have been able to retain much of the character of these charming boats by using a round bilge hull shape simply made using strip planks over...

The Breton Lugger is a simple 2 chine, 'V' bottomed ply over frame yacht. her hull shape is based on the Breton type made simple in chined plywood. The framework is made up of ply...

This little ship has been designed for the sailing author Derek Harvey and incorporates many ideas gleaned from his years of sailing experience. The starting point for the design was the requirement...

The Jarvis 17' motor launch has been drawn up for clinker/ply construction - a building jig is made which consists of chipboard mould shapes mounted on a strongback. Ribbands (stringers) are...

This handy pocket cruiser has been designed for a client who wanted an ultra simple and cheap sailing cruiser for estuary sailing and which would get him across the Channel. The construction could...

The 15' Huntsman is a simple 2 planks per side open canoe with a V bottom and single chine making construction fast with the stitch and tape construction method. The canoe can take 2 adults and more...

There are some rowing races that take place at West Kerry in Eire using 27' rowing gigs. The races take place in the open sea, in harbours and estuaries where there is often a severe chop. Each gig...

This rowing skiff has been lightly modeled on the traditional Thames river skiffs. They were usually a lot longer and around 4' wide. Here, we have produced a design which will delight the rowing...

The Sunray was designed for Brightwater Boats - she is built using the clinker ply method with the ply frames and girders set up together on a strongback. She has a foredeck and aft tank plus side...