Potter 15 & 19

Package pictured above is cut from our premium Raid Braid polyester double-braid and color coded with mainsheet and halyards in "Yacht" white and jib sheets and halyard in "Stainless" silver color. For more color you can request same package in Marlow...

These pins are used for the mast steps on the Potter 15 and the Potter 19. Two required for each mast step.

Windex wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia vane, and easy-to-read, fully adjustable tacking tab system.

Factory Potter 19 mast raising kit. Includes custom stainless gin pole, assorted blocks, hardware, line, and the sleeve that attaches to the bow pulpit.

These stainless chainplates are used for both the Potter 15 and the Potter 19.

Potter 15 and Potter 19 halyard kits made from premium low-stretch Marlow Leisure polyester double braid. Conveniently sent in two colors for easy identification of main or jib and cut to factory-specified lengths (includes enough line to run aft to...

Investment Cast Stainless Steel. This is also the factory West Wight Potter halyard shackle. Part Number A B C D SD-143520 2-1/4" 3/8" 9/19" 3/8"

Adjust and tension dinghy rigging with the ease of a lever. C. Sherman Johnson shroud adjusters were designed for one design dinghies to make quick rig adjustments or to de-tension the rig for storage or to unstep the mast. 7 positions allow for micro...

We brought these solid teak handrails in to service West Wight Potter owners, as the small one-loop rail is OEM for the Potter 15 and the larger 3-loop is OEM for the Potter 19, but these beautiful, smooth-finished teak handrails would work on any small...

This is the factory Potter mast step and will fit most years (some early models are different). The factory riveted the mast foot insode the mast, but 10/32 drill and tap works fine as well. Some dimensions:   Aluminum part that goes inside the...

Herreshoff style Stainless Steel tie-down cleats. They are resistant to salt and sun, and will outlast your boat. Available in 4, 5, 6, & 8 inch sizes.(Note: the Potter factory specifies the 6" SeaDog Stainless Cleat for its 15 & 19 foot...