MSRP:
Now:
$464.95
Was:
— You save
Description
Factory Potter 19 mast raising kit. Includes custom stainless gin pole, assorted blocks, hardware, line, and the sleeve that attaches to the bow pulpit.
View AllClose
Related Products


Factory West Wight Potter 19 Mast Step with pins
MSRP:
Now:
$99.00
Was:
This is the factory Potter mast step and will fit most years (some early models are different). The factory riveted the mast foot insode the mast, but 10/32 drill and tap works fine as well.

Factory Potter Mast Step Pins
MSRP:
Now:
$6.50
Was:
These pins are used for the mast steps on the Potter 15 and the Potter 19. Two required for each mast step.

Factory West Wight Potter Masthead fittings
MSRP:
Now:
$39.00 - $44.00
Was:
Masthead fittings for both Potter 15 and 19

Potter 19 Bilge Drain
MSRP:
Now:
$2.95 - $22.50
Was:
This Garboard Drain & Plug provides drainage for bilge during haul-out. Design includes integral 1-1/8" acetyl drain tube. Pipe plug ensures a watertight seal. Constructed of sturdy UV stabilized...

Potter 15 Singlehander's Package
MSRP:
Now:
$175.00
Was:
This package (which is also suitable for many other small sloops if you adjust halyard lengths) allows the Potter 15 sailor to securely raise and lower all sails without leaving the safety of the...

Potter 19 Keel Upgrade
MSRP:
Now:
$149.00
Was:
This factory upgrade replaces the intrusive steel cable keel-raising system with a rerouted flexible Amsteel (dyneema) line. Kit includes the custom heavy-duty stainless bail.
Customers Also Viewed

Potter 19 Keel Upgrade
MSRP:
Now:
$149.00
Was:
This factory upgrade replaces the intrusive steel cable keel-raising system with a rerouted flexible Amsteel (dyneema) line. Kit includes the custom heavy-duty stainless bail.

Forestay Tensioning Lever
MSRP:
Now:
$75.00
Was:
Mast-raising and rigging goes much easier if you can attach the forestay quickly and easily. These quick-release, adjustable forestay levers from C.Sherman Johnson are the perfect solution for many...
Potter Halyard Kits
MSRP:
Now:
$88.00 - $106.00
Was:
Potter 15 and Potter 19 halyard kits made from premium low-stretch Marlow Leisure polyester double braid. Conveniently sent in two colors for easy identification of main or jib and cut to...


Factory West Wight Potter 19 Mast Step with pins
MSRP:
Now:
$99.00
Was:
This is the factory Potter mast step and will fit most years (some early models are different). The factory riveted the mast foot insode the mast, but 10/32 drill and tap works fine as well.

Pulpit Anchor
MSRP:
Now:
$12.00
Was:
C.S. Johnson Pulpit Anchor. Lots of potential uses for these stainless fittings that slip around and affix on 1" tubing of rails or pulpits, providing a ½" hole to which you can attach a block,...

Potter 15 Singlehander's Package
MSRP:
Now:
$175.00
Was:
This package (which is also suitable for many other small sloops if you adjust halyard lengths) allows the Potter 15 sailor to securely raise and lower all sails without leaving the safety of the...


Small Boat Head System
MSRP:
Now:
$9.00 - $79.00
Was:
Perfect for any small boat without a built-in head
Over the years we've tried a variety of different "heads" on small boats from fold-down seats with waste bags to chemical porta-potties and each has...

Small 7 Hole Quick-Release Shroud Levers
MSRP:
Now:
$37.50
Was:
Adjust and tension dinghy rigging with the ease of a lever.
C. Sherman Johnson shroud adjusters were designed for one design dinghies to make quick rig adjustments or to de-tension the rig for...

Potter Cockpit Drain
MSRP:
Now:
$45.00
Was:
The cockpit drain looks like the photo - two drain fittings, a couple feet of Bilgeflex hose, and some stainless hose clamps

Potter 19 Bilge Drain
MSRP:
Now:
$2.95 - $22.50
Was:
This Garboard Drain & Plug provides drainage for bilge during haul-out. Design includes integral 1-1/8" acetyl drain tube. Pipe plug ensures a watertight seal. Constructed of sturdy UV stabilized...