Factory Potter Mast Step Pins

Stainless Steel Rigging PinsThese rigging pins have many uses - from tabernacles or mast steps like the one directly below, to gudgeons like the picture farther down. These are currently 1/4"...

AISI 304 Stainless Note: Nominal size is overall length of pin - see sketch below for other dimensions...

This is the factory Potter mast step and will fit most years (some early models are different). The factory riveted the mast foot insode the mast, but 10/32 drill and tap works fine as well.

Stainless Steel Clevis pins and rings.Pins: Example - "3/16 x 1/2" means the pin is 3/16's of an inch in diameter on the shank of the pin and there is 1/2 inch between the head and the hole. See...

This is the factory Potter mast step and will fit most years (some early models are different). The factory riveted the mast foot insode the mast, but 10/32 drill and tap works fine as well.

We brought these solid teak handrails in to service West Wight Potter owners, as the small one-loop rail is OEM for the Potter 15 and the larger 3-loop is OEM for the Potter 19, but these beautiful,...

Factory Potter 19 mast raising kit. Includes custom stainless gin pole, assorted blocks, hardware, line, and the sleeve that attaches to the bow pulpit.

Adjust and tension dinghy rigging with the ease of a lever. C. Sherman Johnson shroud adjusters were designed for one design dinghies to make quick rig adjustments or to de-tension the rig for...

Factory Potter 19 Backstay Plates. These cheeks attach to standard masthead fitting as a critical part of the backstay kit. See the PDF below for original factory installation instructions. We don't...

Mast-raising and rigging goes much easier if you can attach the forestay quickly and easily. These quick-release, adjustable forestay levers from C.Sherman Johnson are the perfect solution for many...