Plans & Kits

The Oarsome 15'2" skiff has been designed for the Oarsome Chance Foundation as a simple stitch and tape ply skiff. Oarsome Chance focuses on young people aged from 9 -19 years old who are disengaged from mainstream education and are at risk of...

A nesting dinghy design by Danny Greene The plans contain 8 sheets of 11" x 17" drawings, a 22" x 30" lines drawing and a 30" x 70" set of full size patterns for bottom and side panels. There is also a 12 page building guide. To purchase printed plans...

I have recently drawn up the steel work/construction drawing along with the frame and plate shapes for a steel multi-chine version of the 45' Teign Motor Barge. We can also send details for the rudder engine beds etc for the 45' version as guidance for...

This open canoe has been designed as a simple low cost solution to taking part competitively in the Devizes Westminster race. The hull has an asymmetric shape with a narrow entrance angle to the forward waterlines and with additional buoyancy aft. The...

This is the smallest version of our highly successful Northumbrian Coble range of cruising dinghies. She can sail with 2 crew or row/motor with 3 and has plenty of reserve buoyancy in her lines—she has the same tumblehome, generous freeboard and deep...

This is an example of how we can, using our YachtCAD system, change a design from a multi-chine ply hull shape to a round bilged hull shape suitable for strip planking (or visa versa). A client wanted the graceful shape of our Pete canoe—but he wanted...

Traditional sail boat, 4.5 m long, with outboard motor well, clinker plywood For Ebihen 15 Study Plans, Click HERE Hull length / waterline 4.50 / 4.24 m   Sail area 14 m²   Breadth / waterline 1.85 / 1.64 m   Outboard...

Due to the e-mailed interest in the design, and the plan sales of the original 10 foot version of the Hudson Springs Pram; I've brought it's little brother, the 9 foot FlyCaster to the front of the "need to build" list. It will be the next start to...

DUET specifications (all dimensions are maximum):Length = 105 inchesWidth at Gunwale = 44 inchesWidth at Chine = 34 inchesHeight = 17 inchesHull Weight = 75 poundsDraft = 5 inches nominalMax Load = 500 poundsHull Speed = 5 mph (can plane with ample...

I've tried several different ways to shape a hull to handle rough water. Rough water is a problem around here where the manmade lakes are flat and wide and shallow. We get whitecaps when the wind blows about 12 mph. I think the situation is about...

This concept is in response to many requests for a collapsible Kayak design. In order to find simplicity, I have developed a folding hull design that does not utilize complicated seals and joints. The end result is a compromise between a sleek looking...