Plans & Kits

A Caveat I have decided to make plans for my sailing canoe "Beth" available through Duckworks, but there is a serious caveat: This boat is only suitable for people with a reasonable sailing background. Someone who has fun racing and planing...

This interesting craft is based upon the 'V' bottomed skiffs which were used on the Atlantic Coast side of the Virginian Eastern shore for tonging and crabbing. These boats were distinctive, with their well flared sides, beamy hull and well raked...

This canoe is an interesting development of our Fisher Prospector canoe for clients who want to turn up to the local open canoe meet in threatening manner ready to do a bit of pillaging etc! As far as I know, the Vikings did not have small canoe...

For Pilgrim Full Printed Plans, click HERE For Pilgrim Full Plan digital download, click HERE In my teenage years I sailed an 18 ft gaff rigged centreboard yacht around the Hauraki Gulf near my home just north of Auckland New Zealand. This is a wonderful...

Free plans. To download the file, click HERE Flying Mouse is an exercise to develop just about the smallest, cheapest possible sailing boat I can conceive. As a result, it's not a boat to which you can safely trust your life in any sort of waves -...

This large daysailer may be built in 2 versions - a fixed keel motorboat with either an inboard engine or outboard in a well, or a sailing version with fixed or lifting keel. Construction is for clinker/ply over computer generated moulds which could also...

Length 4.80mDesigner: Paolo LodigianiRound hull, Strip-Planking constructionBuilding Skills: amateur The NEREIDE represents the classical canoe used on the lakes and rivers of North America which, for almost the last two centuries, has been built...

This is version 2 of s&g backpack kayak. Version 2 is 425mm longer compared to original boat. The middle part is exactly same! Only bow and stern parts are longer, so if you have built the original version, you can update it by just building longer...

The Oarsome 15'2" skiff has been designed for the Oarsome Chance Foundation as a simple stitch and tape ply skiff. Oarsome Chance focuses on young people aged from 9 -19 years old who are disengaged from mainstream education and are at risk of...

A nesting dinghy design by Danny Greene The plans contain 8 sheets of 11" x 17" drawings, a 22" x 30" lines drawing and a 30" x 70" set of full size patterns for bottom and side panels. There is also a 12 page building guide. To purchase printed plans...

I have recently drawn up the steel work/construction drawing along with the frame and plate shapes for a steel multi-chine version of the 45' Teign Motor Barge. We can also send details for the rudder engine beds etc for the 45' version as guidance for...

This open canoe has been designed as a simple low cost solution to taking part competitively in the Devizes Westminster race. The hull has an asymmetric shape with a narrow entrance angle to the forward waterlines and with additional buoyancy aft. The...