Paul Fisher

The 16' Bourne runabout is partly based on the Egret but with a forward raking transom and a fair amount of tumblehome in the aft quarters. She uses the same ply skin over a slotted together ply framework but the tumblehome area is planked using diagonal...

Our 15' 8" Fisher Prospector is our most popular canoe design (go to Open Canoes 15'-17'). This new version has been requested by a client who wanted a similar canoe, slightly shorter and with 7 planks per side rather than the 5 of the original design...

22’x 6’8’’x 4’6’’, approx. 1200 lbs. weight. Multichine ply construction over pre-shaped ply frames, bottom hull panel and centre girder. Designed as a replacement for the older One design dayboat racing classes...

This is a strip planked version of our plywood motor canoes—because she is strip planked over computer generated moulds, the spacing between the moulds can be altered to give any length between 12’ and 16’. Apart from using an outboard motor...

By popular request, we have shortened the Raven to give a canoe easier to car-top on smaller vehicles. She can take 2 adults plus camping gear and uses the same simple stitch and tape construction process. The hull has the Raven family’s 3 panels per...

The Sealion was originally modelled on our Seafox sea kayak but the use of Cedar Strip planking for her construction allows a more graceful and curvaceous shape both for the hull and the deck. She is built over computer faired mould shapes set up on a...

A Strip Planked version of our most popular design - the Fisher Prospector Open canoe - plans include full-size templates for the moulds and the sail plan of the FP16. 15'8" Strip Planked Prospector Particulars LOA 15'8" 4.76m Beam 35" 0...

Many moons ago when I first started as a designer with McGruers on the Gareloch, I drew the lines of a 19' pocket cruiser for myself, partly as the day job was full of racing yachts - I never got to build her but the drawing was kept safe and would...

This is a modern ‘sit-on’ type kayak where the cockpits are essentially open and sealed from the remainder of the kayak. The areas around the cockpits are used for both storage and buoyancy.Construction uses 3 or 4mm plywood throughout and the stitch...

The YM Senior is a lovely little pocket cruiser design by the late Kenneth M. Gibbs. Ken Gibbs designed some lovely ply sailing boats many of which used to feature in the original Yachting Monthly magazine. I had much pleasure in sailing a Senior many...

These plans are for the steelwork only of a 17.45m (57') narrowboat. The plan set consists of 7 drawings covering Hull Construction, Hull Construction Details, Deck/cabin Construction, Deck/cabin construction details, Hull panel shapes, Rudder and engine...

This is a simply constructed miniature schooner for the sailing man who likes a classic sail plan. Normally, you would not find a schooner rig on any boat less than 30’ long and therefore less complicated rigs can be used. But if you like plenty of...