Paul Fisher

18’x 11’ (hull beam 3’). Ultra simple stitch and tape construction using 10 sheets of 1/4’’ and 4 sheets of 3/8’’ ply. Built-in buoyancy, good storage and sit-in hulls which may, under a canvas...

We were asked to design "Fanny" for the Boatman magazine and the construction of her hull was covered in issues 30 to 37. Since then several have been built both in plywood and in steel (by Peter Nicholls Steel Yachtbuilders). She was originally based...

A Dutch client asked us to use the original KARI - 2 as a model for a craft not too much longer but capable of having a small cabin area which could take 2 or 3 bunks along with a small cooker and wc. We looked at the original section of the boat and...

This is an outrigger canoe of classic Hawaiian design. Classes of these craft are very popular, especially in places like New Zealand where they are raced in various lengths—this example being one of the shortest. They are noted for their stability...

The Goshawk was designed for an American company for use in their boat hire business. The design brief called for a boat which was tough and which, for only a 16' length, would have as comfortable a cabin space as possible. To go with this, she had to be...

The name ‘Peterborough’ was often used to describe any open Canadian type canoe but more especially those with a lightly rockered hull which had a moderate beam and some tumblehome. Our example has relatively narrow waterlines fore and aft to make...

The Howth Head is a plywood version of the steel Lambay Island design. Like the Lambay, she is a 22' motor boat with a large cockpit area and comfortable accommodation with 2 large berths, w.c. compartment and galley with dining space in the cockpit...

This was an interesting way to start a design. The client had a couple of Super Snipe engines kicking about and he wanted to sell them. What better way to do it and to get the greatest return for his money than to package them. The package that we chose...

The Arctic Skua is a lightweight canoe yawl that has a nod towards the small canoe yawls that were popular in Europe during the last century for touring and racing. She uses 4mm ply and the stitch and tape method of construction to produce a easily built...

The original 14' Skylark was drawn up as a simple extension of the Skylark 12 using the same rig and simple fit-out details as the 12. We then remodelled the hull with an additional chine to give the Mark 2 version. This version uses the same hull shape...

The Adirondack Guide boats were used in the outback of North America in the 19th and early 20th Centuries for hunting, portaging etc and have a very distinctive shape with fairly pinched bow/stern sections and slack bilge shape. Beam was kept low so...

The Swift 6 metre dayboat was commissioned by Mr. P. Roberts who wanted an easily built boat similar in line to some of the French dayboats. In fact, she is also similar to boats of the Gareloch and Loch Long classes raced on the Clyde. The drawings...