Paul Fisher

We have drawn up the steel construction details (hull, deck, sterngear and rudder details only) for this 32' canal boat based on a tug design with a fantail aft end and narrow boat lines amidships running into a tug type bow. She may be fitted out in a...

The Greenshank is a pram version of the Redshank and has a length of 7’6’’ and a beam of 4’. The pram bow gives more space forward for stowing gear or for transporting crew out to your yacht. She is an ideal fishing dinghy...

The Kennet can be built either as a 20' or a 22' slipper launch details and panel shapes are given on the plans for both versions. She has a "V" bottom forward which flattens out as it runs aft giving an easily driven hull shape which has plenty of grip...

The RUFUS 17' motor boat is a simple rugged craft with jaunty good looks. She has 3 chines per side and plenty of freeboard and beam, giving her an excellent carrying capacity and very good stability. She can be made as a simple open launch, in which...

This is a multi-chine plywood entrant for the Mini-Transat race which takes competitors across the Atlantic to Antigua via the Canary Islands. It is known as one of yachting's most dangerous races and is fought by boats with a maximum length of 6.5m. We...

The Mandarin 17 has a beam of 45” and is designed with traditional oarlocks to mirror the traditional Thames skiffs. She may be fitted with a single or double rowing position and the plans detail a rudder and traditional foot rests. She uses 5 to 6...

24’x 6’ using 22 sheets of 3/8’’ and 2 sheets of 1/2’’ ply in it’s basic form. A water ballast tank and motor well may be used and the whole craft made in three 8’ boltable sections for ease in...

This skiff has been drawn up for a client who specifically wanted to develop a design optimised for the “front rower” rowing system (www.frontrower.com) which allows the rower to face forward. For those who do not want to use this system we have...

This attractive pocket cruiser was designed for a client on the island of Mauritius and has some of the hull design features of the indigenous craft with their sweet and not over wide transoms married to traditional English work boat hull shapes with...

The Grey Swan is a traditional gaff cutter of multi chine hull shape with a length over deck (LOD) of only 16’ allowing much of her construction to be completed in a small work space. The original plans show her built using pre shaped ply bulkheads...

One of our clients, Mr. Masters liked the Grey Swan but wanted a cruiser just a little bit bigger so that she could accommodate an inboard engine and provide more room for a basic galley and stowage for a Porta-loo. Having extended the Grey Swan hull, we...

Cobles take many different forms—this is a very different type to that found on the NE Coast of England which are used in the sea off exposed shorelines—this coble is of a type found on rivers and inlands waters and was used for rod fishing—mainly...