Paul Fisher

The Redshank is a beautiful traditional English stem dinghy. Her length is 7’6’’ and she has a beam of 4’ making her a very roomy dinghy for her size. Full-size mould shapes are given so that she may be made by the purist...

The Beaumaris 24 is one of several trailer sailers for strip planking that we have had on the drawing board recently. This particular example has accommodation which includes 3 or 4 berths, a galley and a Porta-Potti w.c., all combined with a good sized...

An American client wanted to produce a replica of the African Queen and saw our Ijssel launch as offering a craft of similar style - so we increased her length to 30' and beam to 8' (later we were asked to increase the beam still further to 10' and this...

The Inishmore is one of a number of strip planked designs that we have enabling the builder to finish up with a beautiful round bilged craft of light weight. The Inishmore is a lovely strip planked dinghy which was initially based upon our Highlander...

Note: This supplement allows a builder of the Rathlin 20 Motor Yacht (described below) to build it as a Motor Sailer. You must have both the Rathlin 20 Motor Yacht plans and this supplement.***********************Our Rathlin design is not the type of...

A leisurely craft from the Edwardian and Victorian eras - days of elegance on the Thames with parasols and wine! we were commissioned to design such a canoe, to be powered by a Gebofa electric 1.6 hp sail drive unit and constructed using modern clinker...

For working the East Coast, exploring shallow estuaries and for the occasional hop across to the continent, maybe through the French canals to the Med, this 30' sharpie combines very easy and cheap construction with a simple and efficient rig and room...

This 26' version of the Golden Bay has the same fairly high and flaired bow sections designed to throw off spray which flow into aft sections which have tumblehome giving her a generous waterline beam for maximum stability. These drawings show her with a...

We have the computer generated mould shapes and building jig details (only) for a 22'x7'2" (6.71x2.18m) Yankee Skiff for rowing or motor power. Could be strip planked or completed in clinker ply. These skiffs have a narrow flat bottom plank and a shapely...

The Hazelnut has been designed for those who want a similar hull shape to the Peterborough model but without the turned up ends. This gives a flatter sheer line more like a guide boat—she retains the 5 plank per side shape with tumblehome for ease in...

The Skellig 26 is a wood version of the Saltee Island. She has the same rugged hull design for use as a workboat/fishing boat for coastal and offshore use. She has a large cockpit and enclosed wheelhouse with space below for a simple wc and/or galley...

The Skellig 19 is based on our Skellig 18 workboat/fishing boat. In this case the client wanted a slightly bigger boat made of steel to be used as a strong and rugged work/fishing boat in Irish waters. The hull plating is 3mm over 4x75mm frames...