Kits and Packages

The complete Portage Pram - Sailing Version - Pacakage includes all of the sub-kits that we sell for the Portage Pram. The online manual is emailed to you. -Portage Pram CNC Plywood kit -Daggerboard and Foils Kit -Portage Pram Epoxy Package -Full Sailing...

This package provides you with the epoxy, fiberglass and related tools needed to begin your Portage Pram build. If you are efficient with your supplies this should seee you throught the whole build. This kit does not provide things like denatured...

Boom and RUNNING RIGGING plus Hardware 2 10-foot lengths of 3/16" Raid Braid for 1st Reef2 20-foot lengths of 3/16" Raid Braidfor 3rd Reef4 SD-043030 3" cleats for reefing lines1 60-foot length of 3/16" Raid Braid for Topping / Lazy jack system (cut to...

This set is recommended by John Welsford for Scamp. The tangs are 2-1/8 inches wide and the pintles have a sturdy 3/8" pin.This set consists of two gudgeons and two pintles. There is no hold down included. All parts are stainless steel. (note: pintle...

a Newer version of the discontinued Ooze Goose. The full plans contain both the OZ Goose plans and the Explorer Supplement - both are needed to build this boat. If you already have the plans for OZ Goose, you can build the Explorer by also purchasing the...

The Goat Island Skiff epoxy kit contains the following: 1-1/2 Gallon System3 Silvertip epoxy kit (choose speed above) 1 lb. wood flour 8 oz. silica thickener 3 yards of 6 oz. x 50" fiberglass cloth for foils 1 roll of 2" wide fiberglass tape If...

Included: (2 each) Ronstan RF254 & RF239 + 1.5 ft 1/4” stainless rod (1) Ronstan Urethane Universal Tiller Extension Joint RF3133

S.C.A.M.P. (Small Craft Advisor Magazine Project) For Plans Instant Download, click HEREOriginal Designer: John Welsford Additional Development: Kees Prins Kit Adaptations: Turn Point Design Our own youthful dreams often featured small boats in starring...

This Goat Island Skiff epoxy kit contains the following: 1-1/2 Gallon RAKA epoxy kit (choose speed above) 1 lb. wood flour 8 oz. silica thickener 3 yards of 6 oz. x 50" fiberglass cloth for foils 1 roll of 2" wide fiberglass tape If you wish to...

This kit includes a 15 gallon kit of System Three Silvertip epoxy resin and hardener, plus 100 yards of 8.8 oz. x 38" E-Glass cloth. All of the epoxy and fiberglass you should need to build a Skate.  Please note: System 3 kits are only available...

Overall Length 18'-8-1/2" Overall Beam 46" Weight 148 lbs. Volume 147.6 c.f. CRUISE AT YOUR OWN PACE! There's an exciting new class of high-performance rowing boat from the drawing board of small-craft adventurer Colin Angus: The RowCruiser. This...

Hardware and Lines Kit for Angus Sailing Rowcruiser The Duckworks part of the list of hardware bits for the Angus RowCruiser as shown on the Angus Row Boats website. A complete list of items in the kit:   Complete Set 1 3/8" Pintle and Gudgeon set...