MSRP:
Now:
$76.99
Was:
— You save
Description
This set is recommended by John Welsford for Scamp. The tangs are 2-1/8 inches wide and the pintles have a sturdy 3/8" pin.
This set consists of two gudgeons and two pintles. There is no hold down included. All parts are stainless steel. (note: pintle tangs cannot be adjusted for rudder thickness but must be either shimmed or let in) For additional dimensions see:
RL-490 Pintles
RL-490 Gudgeons
Related Products


S.C.A.M.P. Sail
MSRP:
Now:
$699.00
Was:
Main-1002ft sail with 3 rows of reef points, bag, logo & ties included100 sq ft lugsail made exclusively by Neil Pryde Sails for SCAMP. This class sail is made from 5.5 oz. Challenge Sailcloth in...

S.C.A.M.P. Printed Plans
MSRP:
Now:
$149.00
Was:
S.C.A.M.P. (Small Craft Advisor Magazine Project) For Plans Instant Download, click HERE

OZ Goose/OZ Racer Rudder & Tiller Hardware Kit
MSRP:
Now:
$64.89
Was:
Included:
(2 each) Ronstan RF254 & RF239 + 1.5 ft 1/4” <

SCAMP Rigging Kits
MSRP:
Now:
$69.99 - $329.99
Was:
Boom and RUNNING RIGGING plus Hardware
2 10-foot lengths of 3/16" Raid Braid for 1st Reef2 20-foot lengths of 3/16" Raid Braidfor 3rd Reef4 SD-043030 3" cleats for reefing lines1 60-foot length of...

Scamp Hardware
MSRP:
Now:
$16.00 - $329.99
Was:
Deck Cleats
6 SD-041606 6" stainless deck cleats for docklines
Pintles and Gudgeons1 set RL490-SCAMP&n
Customers Also Viewed

Racelite Extra Heavy Duty Pintles
MSRP:
Now:
$22.99
Was:
3/8" pins - 1-1/2" - 3" rudders
These pintles come in several widths but only one pin length. There is no gudgeon included. All parts are stainless steel - Fits 1-1/2" through 3" thick rudders...

Scamp Hardware
MSRP:
Now:
$16.00 - $329.99
Was:
Deck Cleats
6 SD-041606 6" stainless deck cleats for docklines
Pintles and Gudgeons1 set RL490-SCAMP Heavy-duty Scamp-specific pintles and gudgeons
Hatches*There are lots of ways...

SCAMP Rigging Kits
MSRP:
Now:
$69.99 - $329.99
Was:
Boom and RUNNING RIGGING plus Hardware
2 10-foot lengths of 3/16" Raid Braid for 1st Reef2 20-foot lengths of 3/16" Raid Braidfor 3rd Reef4 SD-043030 3" cleats for reefing lines1 60-foot length of...


S.C.A.M.P. Sail
MSRP:
Now:
$699.00
Was:
Main-1002ft sail with 3 rows of reef points, bag, logo & ties included100 sq ft lugsail made exclusively by Neil Pryde Sails for SCAMP. This class sail is made from 5.5 oz. Challenge Sailcloth in...

S.C.A.M.P. Printed Plans
MSRP:
Now:
$149.00
Was:
S.C.A.M.P. (Small Craft Advisor Magazine Project) For Plans Instant Download, click HEREOriginal Designer: John Welsford Additional Development: Kees Prins Kit Adaptations: Turn Point Design Our own...

Set of Extra Heavy Duty Pintles and Gudgeons
MSRP:
Now:
$76.99
Was:
See our pintle & gudgeon compatibility chart
This set consists of two gudgeons and two pintles. There is no hold down included. All parts are stainless steel - Fits 1-1/2" through 3" thick...

Scamp Foils Kit
MSRP:
Now:
$495.00
Was:
The SCAMP foils kit includes precision cut rudder and centerboard pre-shaped in halves cut from 18MM Okoume plywood. Save a lot of time and effort with these beautifully shaped foil blanks. Shipping...

S.C.A.M.P. Plans Instant Download
MSRP:
Now:
$149.00
Was:
S.C.A.M.P. (Small Craft Advisor Magazine Project) For printed plans click HEREOriginal Designer: John Welsford Additional Development: Kees Prins Kit Adaptations: Turn Point DesignOur own youthful...


SCAMP CNC PLYWOOD KIT
MSRP:
Now:
$3,200.00
Was:
We're pleased to offer the highest quality precision CNC kit for the SCAMP design. The kit includes all hull related plywood components (planks, bottom, bulkheads, seats, cabin, decks, etc.). The kit...

Set of Medium Duty Pintles and Gudgeons
MSRP:
Now:
$39.99
Was:
This set consists of two gudgeons, one short pin pintle, and one long pin pintle. There is no hold down included. All parts are stainless steel - Fits 3/4" or 1-3/8" thick rudder. (note: pintle tangs...