MSRP:
Now:
$10.99 - $31.99
Was:
— You save
Description
Make your own plugs
These hex drive plug cutters maximize the torque needed to bore into the hardest woods. Cutters are made of hardened steel for long tool life, and they have tapered sides and a chamfered end for easy starting, Tight fitting plugs. Set of 3 includes 1/4", 3/8", and 1/2" plugs.
- Hex drive plugs
- Hardened steel for long life
- Tight fit; no glue needed
- Match wood grain to conceal screw
- Tapered sides and a chamfered end for easy start
Related Products

Martlet 30 Gaff Cutter Plans
MSRP:
Now:
$34.00 - $608.00
Was:
This is a design commissioned by someone who built one of our clinker ply Kane Suffolk Beach Punts and who wanted a safe, comfortable deep water cruising yacht which could also find it's way up...

23' Martlet Pilot Cutter Plans
MSRP:
Now:
$34.00 - $466.00
Was:
The 30' LOD Martlet has been a popular design and represents a lot of seaworthy boat for her length but I have often been asked about a smaller version - a design which embodies the robust pilot...

Cape Cutter 19 Plans
MSRP:
Now:
$400.00
Was:
Gunkholing at its best."Zest" (hull #2) snug in a tiny covealong the shores of False Bay

Bronze Garboard Drain & Plug
MSRP:
Now:
$16.00
Was:
This is the best plug we've found for water ballast tanks like those found on SCAMP, as it is relatively low profile and has an easily turned T-handle.
Sea-Dog says:The Garboard Drain & Plug...

19' Jola Gaff Cutter Plans
MSRP:
Now:
$34.00 - $338.00
Was:
This cracker of a little ship, will take you cruising into shallow waters and creeks whilst at the same time provide a seaworthy yacht for coastal and cross-channel sailing.
Starting from aft,...
Customers Also Viewed

Shark 9-1/2" 17 & 9 TPI FineCut Double PullSaw®
MSRP:
Now:
$17.43 - $24.10
Was:
Shark 10-2440
This is a double pullsaw with a straight handle at a better price than the Japanese double pullsaw that we sell elsewhere. Besides the carpentry and cabinet making stuff listed...

Bronze Garboard Drain & Plug
MSRP:
Now:
$16.00
Was:
This is the best plug we've found for water ballast tanks like those found on SCAMP, as it is relatively low profile and has an easily turned T-handle.
Sea-Dog says:The Garboard Drain & Plug...

SandDevil
MSRP:
Now:
$9.95 - $14.95
Was:
Easy to use, quick-reload manual sanding tool
Delivers power tool results with hand-sanding precision
Use on flat, curved and hard to reach surfaces.
Ideal for large sanding projects AND difficult...

RAKA Resin & Hardener Kits
MSRP:
Now:
$75.00 - $425.00
Was:
RAKA is a good, economical boat building epoxy. It resists blushing and cures clear. Use it for laminating as is or with additives to make gluing, fairing and filleting mixes.Note: This epoxy is not...

Mantus M1 Galvanized Anchors
MSRP:
Now:
$179.00 - $419.00
Was:
DIGS LIKE NO OTHER The Mantus Anchor is designed to penetrate dense grassy bottoms and set with unparalleled holding power. When tested, our anchors set faster and deeper than any...

Gyokucho Double Edge Razorsaws
MSRP:
Now:
$31.00 - $45.45
Was:
I have used these off and on and especially liked one that I tried in DavidNichols' shop once. So I asked what kind it was and bought one for my shop. I have been using it for six months or...

Hole Punch
MSRP:
Now:
$31.57 - $36.14
Was:
High quality professional grade steel. Great for cutting holes for grommets, rings and rivets. Size matches grommet size.

Raptor 18 Gauge Composite Brads
MSRP:
Now:
$16.99 - $19.99
Was:
RAPTOR® nails are not susceptible to the corrosion and oxidation that attacks metal, so your manufactured product retains its beautiful new appearance.
RAPTOR® nails and staples can be sanded...


Plystream Plans PDF
MSRP:
Now:
$80.00
Was:
Specifications:
Overall length including trailer 360 cm (approx) (11'.81")Length of Plystream without trailer: 300 cm (9'.84")Width of Plystream: 170 cm (5'.57")Height: 225 cm (7'.38")Unladen weight,...

Hiwassee Wanderer PDF
MSRP:
Now:
$45.00
Was:
The Hiwassee Wanderer is a simple, easy-to-build canoe that is designed for the amateur boatbuilder to construct at home. It is made from 3 sheets of plywood and a minimal amount of lumber, using the...